• 제목/요약/키워드: positions

Search Result 6,435, Processing Time 0.04 seconds

A Study on the Radiography for Sharpness the Image of the Sternum Bone in X-ray Thoracic Cage (가슴우리 X-ray 촬영에서 복장뼈의 선예한 영상을 얻기 위한 촬영법 연구)

  • Ahn, Byung-Ju;Lee, Jun-Haeng
    • Journal of the Korean Society of Radiology
    • /
    • v.15 no.3
    • /
    • pp.329-336
    • /
    • 2021
  • The Study studied the Inspection Method of Images to obtain a sharp image of the Costume among the bones Composed of Thoracic Using the Thoracic Cage Rando Phantom. At 80 cm of the phantom Distance at the X-ray tube focus, the position of the Phantom was Examined by Changing the Rt and Lt Posterior Oblique(LAO) and Rt and Lt Posterior Postero Oblique positions by 20°, 25° and 30°. The acquired images were Subjectively Evaluated by the Radiographer, and the Evaluation data were analyzed as SPSS ver. 3.0. The signal-to-noise ratio (SNR) was Calculated using the ImageJ Program. As a result, the Cronbach Alpha value was Significantly higher at 0.789. The results of the Signal-to-Noise Ratio (SNR) were high at 20° to 6.038 in the right posterior Transcription Direction at the time of Examination and 7.860, in the Supine Position, for images of Sternum bones. In conclusion, it is Believed that the patient position can be obtained from the Right Anterior Oblique(RAO) Position 20° if the X-ray technique is used to obtain the Sternum's advanced image, and the Left Anterior Oblique(LAO) Position 25° when filming in the Rght lying position.

Acoustic analysis of Korean affricates produced by dysarthric speakers with cerebral palsy (뇌성마비 마비말장애 성인의 파찰음 실현 양상 분석)

  • Mun, Jihyun;Kim, Sunhee;Chung, Minhwa
    • Phonetics and Speech Sciences
    • /
    • v.13 no.2
    • /
    • pp.45-55
    • /
    • 2021
  • This study aims to analyze the acoustic characteristics of Korean affricates produced by dysarthric speakers with cerebral palsy. Korean fricatives and affricates are the consonants that are prone to errors in dysarthric speech, but previous studies have focused only on fricatives. For this study, three affricates /tɕ, tɕh, ͈tɕ/ appearing at word initial and intervocalic positions produced by six mild-moderate male speakers of spastic dysarthria are selected from a QOLT database constructed in 2014. The parameters representing the acoustic characteristics of Korean affricates were extracted by using Praat: frication duration, closure duration, center of gravity, variance, skewness, kurtosis, and central moment. The results are as follows: 1) frication duration of the intervocalic affricates produced by dysarthric speakers was significantly longer than that of the non-disordered speakers; 2) the closure duration of dysarthric speakers was significantly longer; 3) in the case of the center of gravity, there was no significant difference between the two groups; 4) the skewness of the dysarthric speakers was significantly larger; and 5) the central moment of dysarthric speakers was significantly larger. This study investigated the characteristics of the affricates produced by dysarthric speakers and differences with non-disordered speakers.

An Analysis of Stakeholder Issues in the Implementation of Telemedicine Services: Based on Grounded Theory (원격의료 서비스 실행과정에서의 이해관계자 이슈 분석: 근거이론 접근)

  • Lee, Sung Kyung;Park, Sang Cheol;Seo, Eun Hui;Koh, Joon
    • Knowledge Management Research
    • /
    • v.21 no.4
    • /
    • pp.1-19
    • /
    • 2020
  • Recently, implementation of telemedicine in Korea has been conducted as one of pilot projects with public health doctors. To manage and expand telemedicine services sustainably, it is necessary to understand the positions of various stakeholders. The purpose of this study is to observe and describe major phenomena around stakeholders related to telemedicine to capture major issues following the implementation of telemedicine. This study interviewed 24 research participants, including public health doctors who participated in the pilot project for telemedicine services. As a result of analyzing the interview manuscript using the grounded theory method, totally 68 concepts were derived at the coding stage, and 19 sub-categories, 11 categories, were proposed through the categorization process. In addition, through the elicitation concepts and categories of this study, conflicts among stakeholders were explained, conceptual models that presented the process of resolving conflicts, and five types of stakeholders were proposed. This study has theoretical and practical implications in that it captures and describes important issues from stakeholders in telemedicine services. The results of this study are expected to give some hints for problem solving to all of the stakeholders who wish to successfully build telemedicine services.

Effects of Training on Sit to Stand on Various Seat Heights on the Balance in Stroke Patients (다양한 좌석 높이에서 일어서기 훈련이 뇌졸중 환자의 균형에 미치는 영향)

  • Kim, Hyun-Sung;Seo, Byoung-Do
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.12
    • /
    • pp.253-260
    • /
    • 2020
  • This study aimed to compare the effects of sit-to-stand training, or training to stand up from sitting positions at various seat heights, on the balance recovery among stroke patients. This study included 20 stroke patients who were randomly divided into two groups. Each group was trained for six weeks, three times a week from March to June 2019. Static balance and dynamic balance were measured, and the variations were analyzed using the paired t-test and the independent t-test. There were significant changes observed in both static and dynamic balance (p<.05) before and after training. However, no significant changes were seen in the static balance in the standing posture with eyes closed (p>.05). This study confirmed that there was a significant effect of training on the balance of stroke patients, especially when progressively lower seat heights were used during the training. This suggests new directions for treatment during rehabilitation for balance recovery of stroke patients. Further studies will need to apply this training to a larger number of subjects, and use various training methods such as randomization of seat height to enable the generalization of the results of this study and application in clinical practice.

Development of flow measurement method using drones in flood season (I) - aerial photogrammetry technique (드론을 이용한 홍수기 유량측정방법 개발(I) - 항공사진측량 기법 적용)

  • Lee, Tae Hee;Lim, Hyeokjin;Yun, Seong Hak;Kang, Jong Wan
    • Journal of Korea Water Resources Association
    • /
    • v.53 no.12
    • /
    • pp.1049-1057
    • /
    • 2020
  • This study aimed to develop a flow measurement method using drone in flood season. Measuring flow in all branches is difficult to conduct annually due to budget and labor limitation, safety and river works. Especially when heavy rain like storm comes, changes in stage-discharge relationship should be reviewed; however, it is usually impeded by the aforementioned issues. To solve the problem, it developed a simple measuring method with a minimum of labor and time. A numeric map and numeric orthophoto coordinate of South Korea are mostly based on Transverse Mercator Projection (TM) in accordance with rectangular coordinate system and use World Geodetic Reference System 1980 (GRS80) oval figure for conversion. Applying a concept of aerial photogrammetry, it located four visible Ground Control Points (GCP) near the river at Uijeongbu-si (Singok Bridge) and Yeongdong-gun (Youngdong 2nd Bridge) station and measured the coordinates using VRS DGPS. Hovering at a same level, drones took orthophoto of water surface at an interval of 3 seconds. It defined the pictures with GRS80 TM coordinate system, a rectangular coordinate system and then conducted an orthometric correction using GCP coordinates. According to X and Y coordinate analysis, it estimated the distance between the floating positions at 3 seconds-intervals and calculated the flow through the flow area according to the flow path. This study attested applicability of the flow measurement method using drone in flood season by applying the rectangular coordinate system based on the concept of aerial photogrammetry.

A Study on the Usefulness of Copper Filters Made with 3D Printers in Longbone Examination Using Long Length Detector (장골 검출기를 이용한 장골 검사에서 3D 프린터로 제작한 구리 필터의 유용성 연구)

  • Kim, Woo-Young;Seo, Hyun-Soo;Han, Bong-Ju;Yoon, Myeong-Seong;Lee, Young-Jin
    • Journal of radiological science and technology
    • /
    • v.44 no.6
    • /
    • pp.607-613
    • /
    • 2021
  • Long-bone examination is mainly used for inspection of the lower extremities. Recently, a long length detector (FXRD-1751S, VIEWORKS, Korea) with three digital detectors attached has been developed. High energy X-rays are used because pelvic areas require high image quality. In this case, X-rays are transmitted a lot in thin areas such as an ankle, and it is not suitable for diagnosing an image. Therefore, this study use copper filters made with 3D printers to increase image quality in the Long-bone inspection. A copper filter was manufactured in consideration of the overall thickness of the lower part. The experiment was conducted in anterior-posterior (AP) and lateral (LAT) positions, depending on the presence or absence of the filter. 5x5 pixels of region of interest (ROI) were selected from the pelvis, knee, and ankle areas. X-rays were irradiated under the conditions of 70 kVp and 40 mAs for AP, 80 kVp, and 63 mAs for lat when without filters, 90 kVp and 80 mAs for AP, 90 kVp and 100 mAs for lat when with filters. signal to noise ratio(SNR) ratio and contrast to noise (CNR) values were measured 1106.38, 14.34 before applying the filter and 1189.32, 70.43 after the filter. For the knee area, 650.44, 97.61 before applying the filter, and 1013.17, 444.24 after applying the filter. For the ankle area, 206.65, 23.68 before applying the filter and 993.50, 136.11 after applying the filter. In the Long-bone examination, SNR and CNR were greatly measured when the filter was applied, confirmed the availability of using the copper additional filter.

The Japan Health Physics Society Guideline on Dose Monitoring for the Lens of the Eye

  • Yokoyama, Sumi;Tsujimura, Norio;Hashimoto, Makoto;Yoshitomi, Hiroshi;Kato, Masahiro;Kurosawa, Tadahiro;Tatsuzaki, Hideo;Sekiguchi, Hiroshi;Koguchi, Yasuhiro;Ono, Koji;Akiyoshi, Masahumi;Kunugita, Naoki;Natsuhori, Masahiro;Natsume, Yoshinori;Nabatame, Kuniaki;Kawashima, Tsunenori;Takagi, Shunji;Ohno, Kazuko;Iwai, Satoshi
    • Journal of Radiation Protection and Research
    • /
    • v.47 no.1
    • /
    • pp.1-7
    • /
    • 2022
  • Background: In Japan, new regulations that revise the dose limit for the lens of the eye (hereafter the lens), operational quantities, and measurement positions for the lens dose were enforced in April 2021. Based on the international safety standards, national guidelines, the results of the Radiation Safety Research Promotion Fund of the Nuclear Regulation Authority, and other studies, the Working Group of Radiation Protection Standardization Committee, the Japan Health Physics Society (JHPS) developed a guideline for radiation dose monitoring for the lens. Materials and Methods: The Working Group of the JHPS discussed the criteria of non-uniform exposure and the management criteria set not to exceed the dose limit for the lens. Results and Discussion: In July 2020, the JHPS guideline was published. The guideline consists of three parts: main text, explanations, and 26 examples. In the questions, the corresponding answers were prepared, and specific examples were provided to enable similar cases to be addressed. Conclusion: With the development of the guideline on radiation dose monitoring of the lens, radiation managers and workers will be able to smoothly comply with revised regulations and optimize radiation protection.

A Study of the British Armed Forces Policy Utilizing Female Personnel during the War on Terror (테러와의 전쟁 시기 영국군의 여성인력 활용정책 연구)

  • Cho, Sang Keun;Kim, In Chan;Hong, Myung Sook;Yu, Sun Young;Chun, So Min;Park, Sang Hyuk
    • The Journal of the Convergence on Culture Technology
    • /
    • v.8 no.2
    • /
    • pp.203-208
    • /
    • 2022
  • The U.K. during the war on terrorism, the number of military serviceable resources decreased and the volunteer recruitment rate decreased due to the decline in the birth rate, but faced a situation in which complex security threats from IS and Russia gradually increased. As one of the measures to overcome these challenges, the British military promoted a policy to break down existing social conservatism and assign female personnel to close combat positions. The British military formed a consensus within the military through discovery of female military use cases, longitudinal studies, and combat experiments, and then conducted strategic communication to form a social consensus and collect public opinions. In addition, to improve the reliability of the policy, established a combat fitness evaluation system that any combatant who performs close combat should pass. In Korea, amid accelerating competition for hegemony between the U.S. and China, security threats are increasing due to a decrease in military serviceable resources caused by population cliffs. Therefore, the case of the British military will give us considerable implications while also helping to provide the direction necessary for establishing future women's workforce policies.

Evaluating Joint Motion Sensing Efficiency According to the Implementation Method of CNT-Based Fabric Sensors (CNT 기반의 직물센서 구현 방법에 따른 관절동작 센싱 효율 평가)

  • Cho, Hyun-Seung;Yang, Jin-Hee;Lee, Joo-Hyeon
    • Science of Emotion and Sensibility
    • /
    • v.24 no.4
    • /
    • pp.129-138
    • /
    • 2021
  • This study aimed to determine the effects of the shape and attachment position of stretchable textile sensors coated with carbon nanotube on their performance when used to measure children's joint movements. Moreover, the child-safe requirements for fabric motion sensors are established. The child participants were advised to wear integrated clothing equipped with the sensors of various shapes (rectangular and boat-shaped) and attachment positions (at the knee and elbow joints or 4 cm below the joints). The voltage change induced by the elongation and contraction of the fabric sensors was determined for arm and leg flexion-extension motions at 60 deg/s (three measurements of 10 repeats each for 60°and 90°angles, for a total of 60 repetitions). Their dependability was determined by comparing the fabric motion sensors to the associated acceleration sensors. The experimental results indicate that the rectangular-shaped sensor affixed 4 cm below the joint is the most effective fabric motion sensor for measuring children's arm and leg motions. In this study, we designed a textile sensor capable of tracking children's joint motion and analyzed the sensor shape and attachment position on motion sensing clothing. We demonstrated that flexible fabric sensors integrated into garments may be used to detect the joint motions of the human body.

Improving Precision of the Exterior Orientation and the Pixel Position of a Multispectral Camera onboard a Drone through the Simultaneous Utilization of a High Resolution Camera (고해상도 카메라와의 동시 운영을 통한 드론 다분광카메라의 외부표정 및 영상 위치 정밀도 개선 연구)

  • Baek, Seungil;Byun, Minsu;Kim, Wonkook
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.39 no.6
    • /
    • pp.541-548
    • /
    • 2021
  • Recently, multispectral cameras are being actively utilized in various application fields such as agriculture, forest management, coastal environment monitoring, and so on, particularly onboard UAV's. Resultant multispectral images are typically georeferenced primarily based on the onboard GPS (Global Positioning System) and IMU (Inertial Measurement Unit)or accurate positional information of the pixels, or could be integrated with ground control points that are directly measured on the ground. However, due to the high cost of establishing GCP's prior to the georeferencing or for inaccessible areas, it is often required to derive the positions without such reference information. This study aims to provide a means to improve the georeferencing performance of a multispectral camera images without involving such ground reference points, but instead with the simultaneously onboard high resolution RGB camera. The exterior orientation parameters of the drone camera are first estimated through the bundle adjustment, and compared with the reference values derived with the GCP's. The results showed that the incorporation of the images from a high resolution RGB camera greatly improved both the exterior orientation estimation and the georeferencing of the multispectral camera. Additionally, an evaluation performed on the direction estimation from a ground point to the sensor showed that inclusion of RGB images can reduce the angle errors more by one order.