• Journal of Life Science
• /
• v.19 no.8
• /
• pp.1003-1008
• /
• 2009

Abalone (genus Haliotis) is a woody species with a long life span that is primarily distributed throughout the world, including Asia. This species is regarded as a very important marine gastropod mollusk in Korea and China, and also in food industries around the world. We evaluated a representative sample of the five species with nuclear ribosomal DNA internal transcribed spacer sequences (ITS) to estimate genetic relationships within the genus. Aligned nucleotide sequences of the length of the 5.8S subunit of all taxa of Haliotis were found to constant of 160 bp nucleotides. However, aligned nucleotide sequences of the length of ITS1 were varied within genus Haliotis, varying from 272 in H. diversicolor aquatilis to 292 in H. discus hannai. Aligned nucleotide sequences of the length of ITS2, especially, vary from 722 in H. diversicolor aquatilis to 752 in H. sieboldii. Total alignment length is 763 positions, of which 78 are parsimony-informative, 57 variable but parsimony-uninformative, and 459 constant characters. H. discus hannai was similar to H. discus, while H. diversicolor aquatilis was more distinct. ITS analysis may be useful in germ-plasm classification several taxa of genus Haliotis.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.31-39
• /
• 2015

This paper presents the static and kinematic positioning accuracy by the real-time GPS positioning modes of the low-cost GPS receivers using NTRIP-based augmentation service. For this, acquires both the raw measurements data of the field tests by LEA 6T GPS module of u-blox AG, and correction communication via NTRIP caster with RTKLIB as an open source program for GNSS solution. With computing the positions of the check points and road tracks by six kinds of GPS positioning modes which are Single, SBAS, DGPS, PPP, RTK, and TCP/IP_RTK, compared these results to the reference position of the check points. The position error average and rmse of the static test by GPS L1 RTK surveying showed $N=0.002m{\pm}0.001m$, $E=0.004m{\pm}0.001m$ in horizontal plane, and $h=-0.116m{\pm}0.003m$ in vertical, these results are very closed to the coordinates with the geodetic receiver. Especially, in case of the kinematic test with obstacles located on both sides of road, the computed track with ambiguity fixing showed very similar trajectory considerably from VRS network RTK mode. And also, evaluate and verify the performance of the TCP/IP_RTK mode developed based on TCP/IP protocol.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.3
• /
• pp.11-18
• /
• 2016

Since GNSS signals get blocked by buildings in urban canyons or narrow alleys, it is very difficult to secure a enough number of visible satellites for satellite navigation in those poor signal-reception environments. In those situations, one cannot get their coordinates or obtain accurate positions. In this study, a couple of strategies for improving positioning accuracy in urban canyons were developed and their performance was verified. First of all, we combined GPS and GLONASS measurements together and devised algorithms to quality-control observed signals and eliminate outliers. Also, a new multipath reduction scheme was applied to minimize its effect by utilizing SNR values of the observed signals. For performance verification of the developed technique, a narrow alley of 10m width located near the back gate of the Inha University was selected as the test-bed, and then we conducted static and kinematic positioning at four pre-surveyed points. We found that our new algorithms produced an 45% improvement in an open-sky environment compared with the positioning result of a low-cost u-blox receiver. In the alleys, 3-D accuracy improved by an average of 37%. In the case of kinematic positioning, especially, biases showing up in regular receivers got eliminated significantly through our new filtering algorithms.

• Microbiology and Biotechnology Letters
• /
• v.45 no.1
• /
• pp.81-86
• /
• 2017

Alignment of 967 reference sequences of the typical 2-Cys peroxiredoxin family of proteins revealed that 10 amino acids were conserved, with over 99% identity. To investigate whether the conserved aspartic acid residues and serine residue affect the peroxidase and chaperone activity of the protein, we prepared yeast TSA1 mutant proteins in which aspartic acids at positions 75 and 103 were replaced by valine or asparagine, and serine at position 73 was replaced by alanine. By non-reducing SDS-PAGE, TSA1 and the S73A, D75V and D75N mutants were detected in dimeric form, whereas the D103V and D103N mutants were detected in various forms, ranging from high molecular-weight to monomeric. Compared with wild type TSA1, the D75N mutant exhibited 50% thioredoxin peroxidase activity, and the S73A and D75V mutants showed 25% activity. However, the D103V and D103N mutants showed no peroxidase activity. All proteins, except for the D103V and D103N mutants, exhibited chaperone activity at $43^{\circ}C$. Our results suggest that the two conserved aspartic acid residues and serine residue of TSA1 play important roles in its thioredoxin peroxidase activity, and D103 plays a critical role in its chaperone activity.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.4
• /
• pp.25-33
• /
• 2012

In electric power transmission tower structures on offshore, implementation of life management using the event data of regular safety inspections for structural and material damages is strongly recommended. In this study, six tower structures in Sihwa Lake around Yeoungheung island were target bodies for the safety inspections. safety inspections for deterioration about each of six towers were performed about three items for steel member, five items for concrete foundation, and four items for steel-pipe pile in seawater and seawater itself. Safety inspections for steel members included the visual observations of surface appearances, the measurements of member thicknesses, and the checks of painting states. Also safety inspections for concrete foundations comprised the estimation of crack features, the evaluation of non-destructive compression strengths, and the measurements of neutralization depths and chlorides contents. For steel-pipe piles in seawater the inspections comprised the surveys of corrosion states in accordance with potential levels tests and anode tests, the analyses of photos taken on surfaces of the piles as well as the evaluation of seawater quality. A set of deterioration inspections was performed at the same positions around october of each year for three consecutive years. As a result in this study, Newly developed deterioration indexes have been applied profitably to maintain structural safety for electric power transmission towers by utilizing these event data systematically.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.506-515
• /
• 1995

The cultural characteristics of 60 strains of psychrotrophic lactic acid bacteria which were isolated from kimchi, a Korean traditional fermented vegetable food, and identified as Leuconostoc mesenteroides subsp. mesenteroides, Leu. mesenteroides subsp. dextranicum, Leu. paramesenteroides, Leu. lactis, Lactobacillus bavaricus and Lac. homohiochii were tested. All strains grew at $5^{\circ}C,\;10^{\circ}C\;and\;37^{\circ}C$ in tomato glucose broth, but not at $45^{\circ}C$. The optimum growth temperature of Leu. mesenteroides and Lactobacillus sp. were $33{\sim}34^{\circ}C\;and\;34{\sim}36^{\circ}C$, respectively. All strains of Leu. mesenteroides and Lactobacillus sp. grew at 4.8 and 4.2 of initial pH, but not at 4.0. The final pH of Leu. mesenteroides and Lactobacillus sp. in glucose broth were $3.84{\sim}4.10\;and\;3.82{\sim}3.99$, respectively. None of the 60 strains clotted milk nor reduced litmus in litmus milk. All strains of Leu. mesenteroides and Lactobacillus sp. grew in tomato glucose broth containing 7% ethanol or 6.5% NaCl, but not in the broth containing 15% ethanol or 10% NaCl. All strains grew in tomato glucose broth containing 40% bile juice and survived in the artificial gastric juice of pH 3.5. Furthermore, all strains of Leu. mesenteroides survived in the artificial gastric juice of pH 3.0. Since many strains of lactic acid bacteria tested in this study showed differences in several physiological characteristics from those described in Bergey's Manual of Systematic Bacteriology, it was considered that further tests would be necessary to clarify their positions in taxonomic system.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.3
• /
• pp.31-35
• /
• 2013

TSOP(Thin Small Outline Package) is the IC package using lead frame, which is the type of low cost package for white electronics, auto mobile, desktop PC, and so on. Its performance is not excellent compared to BGA or flip-chip CSP, but it has been used mostly because of low price of TSOP package. However, it has been issued in TSOP package that thermal deflection of lead frame occurs frequently during molding process and Au wire between semiconductor die and pad is debonded. It has been required to solve this problem through substituting materials with low CTE and improving structure of lead frame. We focused on developing the lead frame structure having thermal stability, which was carried out by numerical analysis in this study. Thermal deflection of lead frame in TSOP package was simulated with positions of anti-deflection adhesives, which was ranging 198 um~366 um from semiconductor die. It was definitely understood that thermal deflection of TSOP package with anti-deflection adhesives was improved as 30.738 um in the case of inside(198 um), which was compared to that of the conventional TSOP package. This result is caused by that the anti-deflection adhesives is contributed to restrict thermal expansion of lead frame. Therefore, it is expected that the anti-deflection adhesives can be applied to lead frame packages and enhance their thermal deflection without any change of substitutive materials with low CTE.

• Journal of the East Asian Society of Dietary Life
• /
• v.7 no.3
• /
• pp.289-300
• /
• 1997

Newborn dog chymosin was extracted from the stomachs of dogs of 2 weeks of age, and was purified by ion exchange chromatography. Half of the sequence was determined by amino acid sequencing and the complete sequence was deduced from a cloned chymosin cDNA Results showed that the zymogen showed 79% sequence identity with calf prochymosin and 54% identity with porcine pepsinogen A The size of the propart and location of the residue which becomes the amino-terminus in the active enzyme was the same in the prochymosins. The maximum general proteolytic activity at pH 3.2 of newborn dog chymosin was 3-4% of that of porcine pepsin A at pH 2, whereas the milk clotting activity relative to the general proteolytic activity of newborn dog chymosin was much higher than that of calf chymosin. Agar gel electrophoresis at pH 5.2 of stomach extracts of individual dogs showed the existence of two predominant genetic variants of zymogen and enzyme. The two variants could not be distinguished by amino acid composition or amino-terminal sequencing, and no differences in the enzymatic properties of the genetic variants were observed. It was concluded that of the residues that participate in the substrate binding, calf and newborn dog chymosin differ in the following positions (porcine pepsin numbering, subsites in parentheses) : Ser 12 Thr(S$_4$), Leu 30 Val(S$_1$/S$_3$), His 74 Gln(S'$_2$), Val 111 Ile(S$_1$/S$_3$), Lys 220 Met(S$_4$). With regard to the low general proteolytic activity of newborn dog chymosin, the substitution Asp303 Val relative to calf chymosin may contribute to an explanation of this.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.3
• /
• pp.27-36
• /
• 2004

Detection and recognition of human faces in images can be considered as an important aspect for applications that involve interaction between human and computer. In this paper, we propose a face recognition method using eigenfaces and fuzzy neural networks. The Principal Components Analysis (PCA) is one of the most successful technique that have been used to recognize faces in images. In this technique the eigenvectors (eigenfaces) and eigenvalues of an image is extracted from a covariance matrix which is constructed form image database. Face recognition is Performed by projecting an unknown image into the subspace spanned by the eigenfaces and by comparing its position in the face space with the positions of known indivisuals. Based on this technique, we propose a new algorithm for face recognition consisting of 5 steps including preprocessing, eigenfaces generation, design of fuzzy membership function, training of neural network, and recognition. First, each face image in the face database is preprocessed and eigenfaces are created. Fuzzy membership degrees are assigned to 135 eigenface weights, and these membership degrees are then inputted to a neural network to be trained. After training, the output value of the neural network is intupreted as the degree of face closeness to each face in the training database.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.5
• /
• pp.1-8
• /
• 2008

The belief propagation method that has been studied recently yields good performance in disparity extraction. The method in which a target function is modeled as an energy function based on Markov random field(MRF), solves the stereo matching problem by finding the disparity to minimize the energy function. MRF models provide robust and unified framework for vision problem such as stereo and image restoration. the belief propagation method produces quite correct results, but it has difficulty in real time implementation because of higher computational complexity than other stereo methods. To relieve this problem, in this paper, we propose a fast algorithm of the belief propagation method. Energy function consists of a data term and a smoothness tern. The data term usually corresponds to the difference in brightness between correspondences, and smoothness term indicates the continuity of adjacent pixels. Smoothness information is created from messages, which are assigned using four different message arrays for the pixel positions adjacent in four directions. The processing time for four message arrays dominates 80 percent of the whole program execution time. In the proposed method, we propose an algorithm that dramatically reduces the processing time require in message calculation, since the message.; are not produced in four arrays but in a single array. Tn the last step of disparity extraction process, the messages are called in the single integrated array and this algorithm requires 1/4 computational complexity of the conventional method. Our method is evaluated by comparing the disparity error rates of our method and the conventional method. Experimental results show that the proposed method remarkably reduces the execution time while it rarely increases disparity error.