• Korean Journal of Applied Biomechanics
• /
• v.26 no.4
• /
• pp.333-341
• /
• 2016

Objective: The purpose of this study was to assess the consistency of the gliding and push-off motion for single leg skating from the first to fourteenth steps. We hypothesized that: 1) there would be no difference in stroke trajectory, step rate, and cycle rate between the left and right steps of gliding; and 2) there would be a difference in the resultant velocity of toe push-off and the horizontal velocity of the center of mass after six step push-offs. Method: The study included five male 500-m speed skaters (mean height, $1.80{\pm}0.02m$; mean weight, $76.8{\pm}3.96kg$; record, $35.83{\pm}0.30sec$; 100-m record, <9.97 sec). Data were collected from the first to fourteenth steps (40 m) and recorded using five digital JVC GR-HD1KR video cameras (Victor Co., Japan) operating at a sampling frequency of 60 fields/sec and shutter speed of 1/500 sec. For each film frame, the joint positions were digitized using the KWON3D motion analyzer. Position data were filtered with low-pass Butterworth $4^{th}$ order at the cut-off frequency of 7.4 Hz. Results: The right toe of the skating trajectories at $2^{nd}$, $5^{th}$, and $7^{th}$ strokes differed from those of the left toe. The angles of the right and left knee demonstrated unbalanced patterns from the flexion and extension legs. The step and cycle rates of the right and left leg differed from the start until 20 m. The resultant velocities of the toe at the push-off phase and of the body mass center diverged before the six push-offs. Conclusion: This study's findings indicate that the toe of skating trajectory on left and right sliding after push-off should maintain a symmetrical trajectory. The resultant velocity of toe push-off and horizontal velocity from the center of body need to be separated after about six step push-offs.

• Korean Journal of Materials Research
• /
• v.27 no.6
• /
• pp.331-338
• /
• 2017

This study was carried out to investigate the optimum condition of a friction stir welding process for a joint of AA2219-T87 and AA2195-T8 dissimilar aluminum alloys. These alloys are known to have good cryogenic properties, and as such to be suitable for use in fuel tanks of space vehicles. The welding parameters include the travelling speed, rotation speed and rotation direction of the tool. The experiment was conducted under conditions in which the travelling speed of the tool was 120-300 mm/min and the rotation speed of the tool was 400-800 rpm. To investigate the effect of the rotation direction of the tool, the joining was performed by switching the positions of the two dissimilar alloys. After welding, the microstructure was observed and the micro-hardness were measured; non-destructive evaluation was carried out to perform tensile tests on defect-free specimens. The result was that the microstructure of the weld joint underwent dynamic recrystallization due to sufficient deformation and frictional heat. The travelling speed of the tool had little effect on the properties of the joint, but the properties of the joint varied with the rotation speed of the tool. The conditions for the best joining properties were 600 rpm and 180-240 mm/min when the AA2219-T8 alloy was on the retreating side(RS).

• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.457-469
• /
• 2016

During the late phase of severe accidents of light water reactors, a porous debris bed is expected to develop on the bottom of the flooded reactor cavity after breakup of the melt in water. The geometrical configuration, i.e., internal and external characteristics, of the debris bed is significant for the adequate assessment of the coolability of the relocated corium. The internal structure of a debris bed was investigated experimentally using the DAVINCI (Debris bed research Apparatus for Validation of the bubble-Induced Natural Convection effect Issue) test facility. Particle sedimentation under the influence of a two-phase natural convection flow due to the decay heat in the debris bed was simulated by dropping various sizes of particles into a water vessel with air bubble injection from the bottom. Settled particles were collected and sieved to obtain the particle mass, size distribution in the radial and axial positions, and the bed porosity and permeability. The experimental results showed that the center part of the particle bed tended to have larger particles than the peripheral area. For the axial distribution, the lower layer had a higher fraction of larger particles. As the sedimentation progressed, the size distribution in the upper layers can shift to larger sizes because of the higher vapor generation rate and stronger flow intensity.

• Korean Journal of Optics and Photonics
• /
• v.16 no.4
• /
• pp.361-365
• /
• 2005

An absolute interferometer system with multiple point-sources is devised for tile 3-D measurement of rough surface profiles. The positions of the point sources are determined to be the system parameters that influence the measurement accuracy, so they are calibrated precisely prior to performing actual measurements. For the calibration, a CCD camera composed of a two-dimensional array of photo-detectors was used. Performing optimization of the cost function constructed with phase values measured at each pixel on the CCD camera, the position coordinates of each point source is precisely determined. Measurement results after calibration performed for the warpage inspection of chip scale packages (CSPs) demonstrate that the maximum discrepancy is 9.8 mm with a standard deviation o( 1.5 mm in comparison with the test results obtained by using a Form Taly Surf instrument.

• The Plant Pathology Journal
• /
• v.31 no.4
• /
• pp.433-437
• /
• 2015

The infectious full-length cDNA clones of Cucumber green mottle mosaic virus (CGMMV) isolates KW and KOM, which were isolated from watermelon and oriental melon, respectively, were constructed under the control of the cauliflower mosaic virus 35S promoter. We successfully inoculated Nicotiana benthamiana with the cloned CGMMV isolates KW and KOM by Agrobacterium-mediated infiltration. Virulence and symptomatic characteristics of the cloned CGMMV isolates KW and KOM were tested on several indicator plants. No obvious differences between two cloned isolates in disease development were observed on the tested indicator plants. We also determined full genome sequences of the cloned CGMMV isolates KW and KOM. Sequence comparison revealed that only four amino acids (at positions 228, 699, 1212, and 1238 of the replicase protein region) differ between the cloned isolates KW and KOM. A previous study reported that the isolate KOM could not infect Chenopodium amaranticolor, but the cloned KOM induced chlorotic spots on the inoculated leaves. When compared with the previously reported sequence of the original KOM isolate, the cloned KOM contained one amino acid mutation (Ala to Thr) at position 228 of the replicase protein, suggesting that this mutation might be responsible for induction of chlorotic spots on the inoculated leaves of C. amaranticolor.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.2
• /
• pp.145-155
• /
• 2015

Fiber morphology and basic characteristics of Legi bamboos (Gigantochloa atter) growing on Yogyakarta were studied considering their age and height positions in the culms. Culms of 4, 16, and 40 months were harvested, and their total lengths were measured. The length, diameter, and wall thickness of each internode were measured. All the sample culms were divided into three different parts along the height, and their fiber dimension and physical properties were observed. The data obtained were analyzed by analysis of variance. The results showed that the culms had a diameter of 5.8 to 10.8 cm. The lowest internodes always showed the shortest length and the thickest wall. The culms had an average fiber length of 2.41 mm and Runkel ratio of 0.61. Fiber length was affected by the height, while fiber diameter, lumen diameter, and fiber wall thickness were affected significantly by the age of the culms. The culms had high green moisture content (GMC) of 157.89%, and basic density (BD) of $456.67kg.m^{-3}$, a total longitudinal shrinkage of 0.35%, and relatively low R/T shrinkage ratio. The interactions between age and height were affected GMC and BD.

• Journal of Chest Surgery
• /
• v.19 no.1
• /
• pp.83-91
• /
• 1986

The Carpentier-Edwards porcine xenograft valve was used in 21 patients at Seoul National University Hospital during the period between 1977 and 1979. Twenty-four Carpentier-Edwards valves were implanted along with 2 others. Three patients died within 30 days of operation, an operative mortality rate of 14.3%. Eighteen early survivors were followed up for a total 67.5 patient-years [mean, 45.0$\pm$32.0 months]. There were 2 late deaths with a linealized late mortality rate of 2.96%/patient-year; one died from cerebral bleeding [1.48% bleeding/patient-year] and the other from prosthetic valve endocarditis [1, 48% endocarditis/patient-year]. There was no case of thromboembolism. Two patients developed mitral regurgitation [2.96% failure/patient-year]. Symptomatic improvement was excellent. The actuarial survival rate and the probability of freedom from overall valve failure were 75.3$\pm$9.6% and 80.7$\pm$12.9% at 9 years after surgery respectively. During the period from October, 1968, through June, 1985, 1, 190 substitute heart valves were used in a total of 967 patients at Seoul National University Hospital; of which, 90.9% were either porcine aortic or bovine pericardial xenograft valves. For the evaluation of the xenograft tissue valves, the consecutive patients with lonescu-Shiley valve in the mitral, aortic and both positions, Angell-Shiley valve and Carpentier-Edwards valve were recently studied on the clinical ground. They were 531 patients, and 643 xenograft valves were used. The operative mortality rate was 6.97% and a linealized late mortality rate 2.94%/patient-year. A total of 490 early survivors were followed up for 917.6 patient-years [mean, 22.5 months], and 70% of patients completed the follow-up. The linealized incidences of complications were: 2.29% emboli/patient-year, 1.98% bleeding/patient-year, 1.20% endocarditis/patient-year, and 3.49% failure/patient-year. These clinical resutls are fully comparable with those in the major reports. The durability of the glutaraldehydepreserved xenograft heart valves remains as a great concern and a continuing debate, expecially for the group of patients in the pediatric age. The need of more durable material for the improved tissue valves was also discussed.

• Journal of Chest Surgery
• /
• v.21 no.4
• /
• pp.619-629
• /
• 1988

The increasing number of replacement of the substitute cardiac valves were seen in these 2 years. Out of a total 1,408 patients with cardiac valve replacement, 54 required replacement of the substitute valves. Fifty-nine substitute valves replaced were 43 in mitral, 14 in aortic and 2 in tricuspid positions; and they were 36 Ionescu-Shiley, 15 Hancock and 3 Angell-Shiley bioprosthetic valves and 3 St. Jude Medical and 2 Bjork-Shiley prosthetic valves. Primary tissue failure was the most frequent reason of replacement[38 patients] followed by paravalvular leak[9 patients], prosthetic valve endocarditis[6 patients] and valve thrombosis[1 patient] in order. The most pronounced pathology of the failed xenograft valves seen in the primary tissue failure group was calcification and fixation of the cusps with or without tear and defect of the cuspal tissue. The operative mortality rate was 7.4%. Fifty early survivors were followed up for a total of 82.6 patient-years and there was no late death. Actuarial survival rate was 92.3*3.8% at 6 years after surgery. Although the definite tendency toward early and accelerated degeneration of the xenograft valves has been seen in patients younger than 20 to 25 years of age, no strict age limit from where the tissue failure slows down could be determined. The requirement of the ideal substitute valves would be the durability of the recently developed mechanical prostheses armed with the low thrombogenicity of the bioprostheses. At the present time, the need of compromise in selection between less thrombogenic bioprosthetic and more durable mechanical valves should be stressed. The difficulty in choice is yet important in patients of middle age and children where the use of homograft valves may be one of the solution despite of certain limitations from sociomedical reasons.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.12 no.1
• /
• pp.21-28
• /
• 2006

Peroxidase activity was measured in brown leaf spot pathogen (Myrothecium roridum) inoculated potted mulberry (Morus alba) during pre-symptomatic to various symptom development stages and compared with corresponding healthy leaf tissues. The enzyme showed a pH optimum of 7.0 and the activity was linearly increased up to 15 min of incubation. The peroxidase had a broad substrate specificity and the rates of oxidation were in the rank of pyrogallol> guaiacol> ascorbate at pH 7.0. Catechol at 10 mM inhibited 89% of guaiacol-peroxidase and 76% pyrogallol-peroxidase activities, indicated higher non-specific peroxidation in pyrogallol dependent assay system in mulberry than guaiacol. The optimum requirement for the guaiacol dependent assay was 0.2 ml (${\approx}40-60{\mu}g$ equivalent of protein) of crude enzyme source. Excepting the 8th leaf from the apex, the peroxidase activity did not vary appreciably in different leaf positions. In pre-symptomatic phases, an initial (1 to 5 min) rise of peroxidase activity was noticed in inoculated leaves, and then maintained a plateau up to 300 min. In contrary, non-infected tissue showed a slightly increased trend of enzyme level up to 420 min. In infected tissue, a sharp transient increase (3.1 fold) of peroxidase activity appeared between 300 - 420 min post infections. Afterwards, significantly different but steady maintenance of enzyme levels were observed in two treatments. On the other hand, during symptom development, a sharp increase in peroxidase activity was noticed up to 4th grade of lesion appearance (25.1 % to 50% of leaf area infection), and then declined slightly. However, in non-infected but same age healthy leaves, such huge fluctuations of enzyme level did not apparent. A high positive correlation $(R^2=0.92)$ between peroxidase activity and leaf spot development grades was also marked. The result implies that pre-symptomatic burst (between 1 - 5 and 300 - 420 min) and subsequent increased trend of guaiacol peroxidase activity may require for the symptomatic manifestation of Myrothecium leaf spot in mulberry.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.2
• /
• pp.187-191
• /
• 2004

Actin is a ubiquitous and highly conserved protein found in eukaryotic organisms. In this study, we describe the cDNA cloning and mRNA expression of an actin gene from the mulberry longicorn beetle, Apriona germari. The A. germari actin cDNA is 1524 bp containing a complete 1128 bp open reading frame that encodes a polypeptide of 376 amino acid residues with a predicted molecular weight of about 41.5 kDa. The deduced amino acid sequence of the A.germari actin cDNA showed 99% protein sequence identity to Homalodisca coagulata actin, differing at only two amino acid positions, and 92-98% protein sequence identity to known insect species actins. The predicted three-dimensional structure of A. germari actin revealed the four residue hydrophobic pulg loop characteristic of the actin family. Northern blot analysis showed that A. germari actin is highly expressed in epidermis and muscle, and less strongly in midgut, but not in the fat body of A. germari larva.