• Physical Therapy Korea
• /
• v.9 no.3
• /
• pp.23-37
• /
• 2002

This study examined the muscle recruitment order during extension of the hip joint in normal subjects, and evaluated whether the external support obtained from wearing a lumbosacral corset had an effect on muscle recruitment leading to increased lumbar stability. The subjects were 40 normal adults (32 male, 8 female) with no history of low back pain and no pathological findings in the nervous or musculoskeletal systems. All subjects extended their hip joints under 3 positions (prone, sidelying, standing). During extension, the onsets of contraction of the rectus abdominis, gluteus maximus, and semitendinosus muscles were measured. Electromyographic activity was measured using a surface electrode, and the muscle contraction onset time was designated as the point exceeding a threshold of 25 ms, using a mean plus twice of the standard deviation. To compare the average order of muscle contraction onset time, a Freedman two-way analysis of variance by ranks was used. The relative difference between muscle contraction onset time wearing and not wearing a lumbosacral corset was measured using a paired t-test. A difference in the average muscle contraction onset order for the rectus abdominis, gluteus maximus, and semitendinosus muscles was observed (p<.05) among three positions. However, wearing a lumbosacral corset did not. change the contraction order. In addition, wearing a lumbosacral corset produced a significant difference (p<.05) in the relative onset time between the rectus abdominis and gluteus maximus in the standing position, but no difference was observed for the other muscles or positions. In the future, patients suffering from low back pain should be compared with normal subjects to determine the effectiveness of a lumbosacral corset in changing muscle recruitment order.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.15-27
• /
• 2004

Sliding aspects of rock slope, where large-scaled tension cracks are induced during preliminary excavation, have been analyzed. Structure of rock mass is investigated by performing the electrical resistivity survey and the orientations and positions of discontinuities are measured from DOM-drilled core log. Geological evidence far primary failure movement has been detected and clay minerals which possess swelling properties are identified through XRD analysis. Slope stability is examined by considering the orientations of discontinuities and their trace distributions on the cut-face and neighboring natural slope surface. Both orientations and positions of failure-invoking discontinuity planes, traces of which are exposed within the anticipated sliding region, are concerned fur analyzing the preferred sliding directions. Regional sliding vectors are assessed based on the relative positions of potential sliding planes in the boreholes and the general trend of anticipated failure movement of rock slope is also investigated.

• IE interfaces
• /
• v.18 no.3
• /
• pp.288-296
• /
• 2005

Many jobs and activities in our daily lives require squatting postures. The fore part includes housekeepers, farmers, and welders and the latter includes a wide variety of activities such as housekeeping; planting, cultivating and harvesting various agricultural products; grinding, welding, etc. It is speculated that prolonged squatting postures without any supporting stool would gradually cause musculoskeletal injuries to workers. This study is conducted to examine the proper height of stools according to the position of the working materials and to develop wearable stools for workers with squatting posture. Forty male and female subjects participated in the experiment to find the proper height of stools according to the position of the working materials. Subjects were asked to squat and work with 3 different working positions: floor level; ankle level; shank level of 3 different stool height conditions: 10cm height; 15cm height; and 20cm height. After 5 minutes of maintaining a squatting work posture while sitting on the different height stools, Likert summated rating method as well as pairwise ranking test was applied to evaluate the user preferences for provided stools under the conditions of different working positions. The results of statistical analysis show that the subjects preferred 10cm height stool for floor level, 15cm height stool for ankle level, 20cm height stool for knee level. We thus strongly recommend to use appropriate height stools in accordance with the different working positions. Moreover, a prototype wearable stool was designed such that workers with squatting posture do not need to move the stool while they are moving about. The purpose of developing wearable stool was to decrease the physical stress and hence promote worker's health who work with squatting posture.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.6
• /
• pp.703-713
• /
• 2011

In this study, to minimize trial and error in the design and manufacturing processes of a high-precision large-surface micro-grooving machine which is able to fabricate the molds for 42 inch LCD light guide panels, the effects of the structural deformation of the micro-grooving machine according to the positions of the X-axis, Y-axis and Z-axis feed systems were examined on the tool tip displacement errors associated with the machining accuracy. The virtual prototype (finite element model) of the micro-grooving machine was constructed to include the joint stiffnesses of the hydrostatic bearings, hydrostatic guideways and linear motors, and then the tool tip displacement errors were measured from the virtual prototype. Especially, to establish the prediction model of the tool tip displacement errors, which was constructed using the positions of the X-axis, Y-axis and Z-axis feed systems as independent variables, the response surface method based on the central composite design was introduced. The reliability of the prediction model was verified by the fact that the tool tip displacement errors obtained from the prediction model coincided well those measured from the virtual prototype. And the causes of the tool tip displacement errors were identified through the analysis of interactions between the positions of the X-axis, Y-axis and Z-axis feed systems.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.18 no.2
• /
• pp.49-55
• /
• 2012

Background: The purposes of this study were to: 1) investigate the relation between thoracic kyphosis, postural stiffness and thoracic rotation and 2) the intra-rater reliability of the measurement methods for thoracic kyphosis and rotation angle. Methods: Thirty-nine young adults (13 males, 26 females) participated in the study. Thoracic kyphosis was measured using a Flexicurve while standing in their usual relaxed posture and then in their maximally erector posture. Index of kyphosis (IK) measures taken in the relaxed and maximally erect positions were used to estimate postural stiffness. Thoracic rotation range of motion (ROM) was measured using universal goniometer and inclinometer in two positions. The association between the magnitude of the IK and thoracic stiffness and thoracic rotation ROM was also examined. Reliability was determined using intra-class correlation coefficients (ICC). Results: When measured from the mean relaxed IK (${\pm}SD$) was 7.42 (${\pm}1.47$) and mean erect IK was 4.92 (${\pm}1.63$) and mean IK ratio was 1.66 (${\pm}.65$). The relaxed IK was significantly correlated with the range of motion thoracic rotation in two positions (r=.503~580, p<.01). Conclusion: Thoracic kyphosis in relaxed position was associated with the range of motion thoracic rotation. Thoracic kyphosis measurement with the Flexicurve and range of motion 2 techniques of thoracic rotation showed good reliablity and may be a useful measurement tool in clinical practice.

• Journal of KIISE:Software and Applications
• /
• v.32 no.5
• /
• pp.385-395
• /
• 2005

Long sentence analysis has been a critical problem in machine translation because of high complexity. The methods of intra-sentence segmentation have been proposed to reduce parsing complexity. This paper presents the intra-sentence segmentation method based on maximum entropy probability model to increase the coverage and accuracy of the segmentation. We construct the rules for choosing candidate segmentation positions by a teaming method using the lexical context of the words tagged as segmentation position. We also generate the model that gives probability value to each candidate segmentation positions. The lexical contexts are extracted from the corpus tagged with segmentation positions and are incorporated into the probability model. We construct training data using the sentences from Wall Street Journal and experiment the intra-sentence segmentation on the sentences from four different domains. The experiments show about $88\%$ accuracy and about $98\%$ coverage of the segmentation. Also, the proposed method results in parsing efficiency improvement by 4.8 times in speed and 3.6 times in space.

• Environmental and Resource Economics Review
• /
• v.24 no.3
• /
• pp.489-522
• /
• 2015

According to Law on Allocation and Trading of GHG Allowances of 2013 in Korea as well as the 2014 National Master Plan for Korean Emissions Trading System, the System should be designed to minimize the change in the market positions of the affected firms. In this paper, we investigate how that principle might become ineffective by the ways of distributing allowances and applying different accounting methods using a Cournot duopoly model. Although the way of allocating allowances freely to firms combined with accounting them for having no values would minimize their market positions, it would not the most cost-effective way of GHG reduction since it does not provide financial market with accurate informations.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.1
• /
• pp.77-85
• /
• 1996

To obtain basic information for characteristics of naked barley cultivars, awn length and weight, kernel weight along spikelet positions of some cultivars bred in Korea were investigated. Awn length and weight of third to fifth spikelet, and kernel weight of second to fourth spikelet from spike tip were not different from each mean value for total of spike. From the spike base, awn of third to fourth spikelet was longest and heaviest, and kernel weight of fifth to sixth spikelet was heaviest. Value for awn length, awn weight, and kernel weight of lateral row florets was lower 13 to 26％, 26 to 41％, and 18 to 25％, respectively than one for those of central row floret. Difference for awn length and weight between central and lateral row in nami type cultivars compared to uzu type cultivars was small. In the ratio of weight/length of awn, awn of uzu type cultivars was thicker than that of nami type cultivars, and awn of central row was thicker than those of lateral rows. Kernel weight was linearly related to awn weight. When one spike was divided into three parts, awn length and weight of low part were not different from those of central part, but were longer and heavier than those of upper part. The order of kernel weight was central$\geq$low>upper part.

• The Journal of Korean Physical Therapy
• /
• v.24 no.2
• /
• pp.127-133
• /
• 2012

Purpose: This study aims to examine the power changes in eletrocenphalogram (EEG) detected from the tibialis anterior muscle, during repetitive contraction exercise in normal female adults. Methods: The subjects of this study were 24 normal adult females, with no musculoskeletal or nervous system disorders. The 24 female subjects were divided into two groups: 12 subjects comprised a voluntary stimulation training group, and the other 12 subjects comprised an electrical stimulation training group. A total of thirty contractions were made repetitively by each woman, with maximal voluntary contraction exercise for six seconds, and a resting time of three seconds. During the experiment, their EEG was measured at eight positions. The eight positions were Fpz, Fz, Cz, CPz, C3, C4, P3, and P4, in accordance with the international 10~20 system. Results: The relative alpha power and beta power showed no statistically significant differences between the two groups. But the relative gamma power of the CPz, C3, C4, P3, and P4 areas showed statistically significant differences between the two groups (p<0.05). The relative theta power of the C4 area showed statistically significant differences between the two groups (p<0.05). Conclusion: Our findings show that tibialis anterior muscle contraction by electrical stimulation and by voluntary repeated contraction differentially affected brain activation. In particular, the CPz, C3, C4, P3 positions of relative gamma power showed brain activation in voluntary contraction. The C4 position of relative theta power showed different brain activation between the two groups.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.4
• /
• pp.113-121
• /
• 2015

PURPOSE: The purpose of this study was to determine the effect of shoulder external rotation on muscle activities of the scapular upward rotators during arm elevation. METHODS: Nineteen healthy subjects with no medical history of shoulder pain or upper extremity disorders were recruited for this study. Electromyography (EMG) was used to measure the muscle activities of the serratus anterior (SA), upper trapezius (UP), lower trapezius (LT) and infraspinatus (IS) muscles during arm elevation. The EMG activities were recorded while the subjects performed $90^{\circ}$ arm elevation with three different arm positions; palm down (PD), neutral position (NP), and palm up (PU). While seated in a chair, the subject was asked to raise the upper extremity in the sagittal plane in random order. Subjects performed $90^{\circ}$ arm elevations in three trials at each arm position. The mean EMG activity normalized by the maximal voluntary isometric contraction was analyzed across three arm positions. Repeated measures one-way ANOVA and the post hoc Bonferroni tests were used to determine the differences in muscle activities among the three arm positions. RESULTS: The EMG activities of the SA and IS were significantly greater in the PU condition than in the other conditions during arm elevation. No significant difference was noted between the NP and PD conditions during arm elevation. CONCLUSION: These results suggest that shoulder external rotation (palm up position) can be used to activate the SA. Therefore, we recommend a scapular protraction exercise in the palm up position for strengthening the SA.