• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.277-284
• /
• 2004

The subject of this study is to apply experimentally In resolution stereo imagery of IKONOS to producing 1:50,000 scale maps for Munsan area in Paju, being near the Military Demarcation Line, is inaccessible for aerial photography. Ground control points were acquired from GPS surveying to perform geometric corrections on images. Digital maps were produced from IKONOS stereo imagery on the digital photographic workstation. From field investigation, RMS errors of the plane and vertical positions are estimated respectively at $\pm$1.706m and $\pm$1.231m, respectively. These plane and vertical accuracies are within the tolerance limits of those provided in the NGIS Digital Topographic Map Production Rules. Therefore this suggested method is recommended for producing the large scale digital maps of 'No flight' zone near the M.D.L.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.4
• /
• pp.393-401
• /
• 2003

Automatic control technologies for the marine pile driving provides accurate and rapid intruding into the planned positions of the pile with planned slope and direction, so that the construction maintenance and management are more efficient and the quality of the construction is more promising. Therefore, in this study, the application scheme of RTK GPS to the automatic control of the pile driving presented. It is expected that the presented scheme using the precise RTK GPS technique assures the efficient and economic 3D positioning accuracy for the precise marine construction management like the precise foundation of marine structures made of piles and the dredging work. It is found that the suggested scheme decrease 60% of the construction error compared with specifications reference because marine position accuracy is measured within 4cm in real time. In addition, the automatic position control system using GPS reduced the construction period and cost compared with existing methods about 30% and 35%, respectively.

• Molecules and Cells
• /
• v.22 no.3
• /
• pp.314-322
• /
• 2006

The whole mitochondrial genome (14,915 nt) of Pollicipes mitella (Crustacea, Maxillopoda, Cirripedia, Thoracica) was sequenced and characterized. It is the shortest of the 31 completely sequenced crustacean mitochondrial genomes, with the exception of a copepod Tigriopus japonicus (14,628 nt). It consists of the usual 13 protein-coding genes, 22 tRNA genes, 2 rRNA genes, and 1 relatively short non-coding region (294 nt). The thoracican cirripeds apart from Megabalanus volcano have the same arrangement of protein-coding genes as Limulus polypemus, but there are frequent tRNA gene translocations (at least 8). Some interesting translocation features that may be specific to the thoracican cirriped lineage are as follows: 1) trnK-trnQ lies between the control region and trnI, 2) trnA-trnE lies between trnN and trnS1, 3) trnP lies between ND4L and trnT, and 4) trnY-trnC lies between trnS2 and ND1. In P. mitella there are two trnL genes (L1 and L2) in the typical crustacean positions (ND1-L1-LrRNA and CO1-L2-CO2). The present result is compared and discussed with the other three cirriped mitochondrial genomes from one pedunculate (Pollicipes polymerus) and two sessiles (Tetraclita japonica and M. volcano) published so far. Mitochondrial protein phylogenies reconstructed by the BI and ML algorithms show that the thoracican Cirripedia is monophyletic (BPP 100/BP 100) and associated with Remipedia (BPP 98/BP 35). In addition, Oligostraca, including Ostracoda, Branchiura, and Pentastomida, is a monophyletic group (BPP 99/BP 68), and is basal to all the other examined arthropods. Remipedia + Cirripedia appears as an independent lineage within Arthropoda, apart from Thoracopoda (Malacostraca, Branchiopda, and Cephalocarida). The Thoracopoda is paraphyletic to Hexapoda. The present result suggests that the monophylies of Crustacea and Maxillopoda should be reconsidered.

• Molecules and Cells
• /
• v.27 no.2
• /
• pp.149-157
• /
• 2009

In both gram-positive and several gram-negative bacteria, the transcription of dnaK and groE operons is negatively regulated by HrcA; however, the mechanism modulating HrcA protein activity upon thermal stress remains elusive. Here, we demonstrate that HrcA is modulated via reduction and oligomerization in vitro. Native-PAGE analysis was used to reveal the oligomeric structure of HrcA. The oligomeric HrcA structure became monomeric following treatment with the reducing agent dithothreitol, and this process was reversed by treatment with hydrogen peroxide. Moreover, the mutant HrcA C118S exhibited reduced binding to CIRCE elements and became less oligomerized, suggesting that cysteine residue 118 is important for CIRCE element binding as well as oligomerization. Conversely, HrcA mutant C280S exhibited increased oligomerization. An HrcA double mutant (C118S, C280S) was monomeric and exhibited a level of oligomerization and CIRCE binding similar to wild type HrcA, suggesting that cysteine residues 118 and 280 may function as checks to one another during oligomer formation. Biochemical fractionation of E. coli cells overexpressing HrcA revealed the presence of HrcA in the membrane fraction. Together, these results suggest that the two HrcA cysteine residues at positions 118 and 280 function as reduction sensors in the membrane and mediate oligomerization upon stress.

• Journal of Microbiology
• /
• v.38 no.2
• /
• pp.66-73
• /
• 2000

To investigate the genetic relationship among 12 species belonging to the Fusarium section Martiella, Dlaminia, Gibbosum, Arthrosporiella, Liseola and Elegans, the internal transcribed spacer(ITS) regions of ribosomal DNA (rDNA) were amplified with primer pITS1 and pITS4 using the polymerase chain reaction(PCR). After the amplified products were digested with 7 restriction enzymes, restriction fragment length polymorphism (RFLP) patterns were analyzed. The partial nucleotide sequences of the ITS region were determined and compared. Little variation was observed in the size of the amplified product having sizes of 550bp or 570bp. Based on the RFLP analysis, the 12 species studied were divided into 5 RFLP types. In particular, strains belonging to the section Martiella were separated into three RFLP types. Interestingly, the RFLP type of F. solani f. sp. piperis was identical with that of isolates belonging to the section Elegans. In the dendrogram derived from RFLP analysis of the ITS region, the Fusarium spp. examined were divided into two major groups. In general, section Martiella excluding F. solani f. sp. piperis showed relatively low similarity with the other section. The dendrogram based on the sequencing analysis of the ITS2 region also gave the same results as that of the RFLP analysis. As expected, 5.8S, a coding region, was highly conserved, whereas the ITS2 region was more variable and informative. The difference in the ITS2 region between the length of F. solani and its formae speciales excluding F. solani f. sp. piperis and that of other species was caused by the insertion/deletion of nucleotides in positions 143-148 and 179-192.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.1
• /
• pp.37-47
• /
• 2004

In this study the load distribution and settlement of soil nailed-drilled shafts subjected to axial loads were evaluated by a load-transfer approach. Special attention was given to the reinforcing effects of soil nails placed from the shafts to surrounding weathered- and soft-rocks based on an analytical study and a numerical analysis. An analytical method that takes into account the number, the positions on the shaft, the grade, and the inclination angle at which the soil nails are placed was developed using a load transfer curve methods. Through the comparative study, it is found that the prediction by present approach simulates well the general trends observed by the in-situ measurements and numerical results SHAFT 4.0. It is also found that the reinforcing effects of soil nails increases in the order of hard-, soft- and weathered-rock since the ultimate shaft resistance far large bored piles in weathered rocks is fully mobilized after small displacements of the shaft, compared to the soft- and hard-rocks and subsequently the side resistance is transferred down to the soil nails.

• Korean Journal of Health Education and Promotion
• /
• v.27 no.2
• /
• pp.49-57
• /
• 2010

Objectives: The main objectives of the article are to review roles and prospective of the Health Education Specialist on the globalized World, and develop the new positions and jobs of the Health Education Specialists on health promotion. Results and Conclusion: There are many rapid changes, these days, in the Medical and Health Environments, because of Globalization. Modern society needs health professionals who are equipped with new knowledge and information to correspondence with various Health Problems, such as the appearing and disappearing of new contagious diseases, problems of improper health barriers for foreign products, health problems from poverty and also health inequalities are known to be rising. Globalization has induced new needs for Health Professional manpower. After the Ottawa Charter, international society is training and utilizing Health Education Specialists as the propulsive core member of the Health Promotion Era. And also society now expects and requests the activities of Health Education Professionals as a group effort, not only in their own countries, but also across the barriers of international society. Health Professionals are working in WHO, UNICEF KOICA or other international organizations. Especially England and USA are utilizing Health Education Professionals in Health Planning and Education Work to keep up with Health Promotion Era. Now, we need to establish ideal and proper strategies in Health Promotion Work, as a one of the pioneer countries to lead Internationalization. To accomplish this task, Health Education Specialists should be well utilized in the field of Health Promotion Work, such as communities, schools, industrial sites and international health organizations.

• Convergence Security Journal
• /
• v.17 no.2
• /
• pp.3-13
• /
• 2017

In the knowledge-information society, many domestic companies put lots of investment in technical development to possess core technologies and intellectual property. However, in the results of passive investment in security to protect their technologies compared to the active investment in technical development, the technology leaks from many companies and research institutes are rapidly increasing. Such increase of technology leaks not only causes damage to companies, but also has harmful effects on national economy directly and indirectly. Even though it has been perceived that a lot of industrial technology leak crimes are committed by former/current workers of small and medium-sized businesses, it is hard to find researches that mainly compare and analyze them. Therefore, this study aimed to understand the actual status of industrial technology leaks by analyzing cases of industrial technology leaks from 2014 to 2016 based on the type of victimized companies, corporate internal leakers' positions, matter of complicity, tools used for technology leaks, and motivation for technology leaks. Through the analysis in each type, the patterns and characteristics of industrial technology leaks were researched, and also the exploratory research on industrial security for the prevention of industrial technology leaks was conducted.

• Physical Therapy Korea
• /
• v.18 no.4
• /
• pp.1-10
• /
• 2011

This study compared the stability of the cervical spine according to the presence of neck pain and deep neck flexor performance. Thirty subjects with neck pain, and thirty subjects without neck pain were recruited for this study. The Cranio-cervical flexion (CCF) test was applied using a pressure biofeedback unit to classify the subjects into four subgroups; no cervical pain and good deep neck flexor performance (NG group), no cervical pain and poor deep neck flexor performance (NP group), cervical pain and good deep neck flexor performance (PG group), and cervical pain and poor deep neck flexor performance (PP group). The head sway angle was measured using a three-dimensional motion analysis system. A 3-kg weight was used for external perturbation with the subject sitting in a chair in the resting and erect head positions with voluntary contraction of the deep neck flexors. A one-way analysis of variance (ANOVA) was performed with a Bonferroni post hoc test. The deep neck flexor performance differed significantly among the four groups (p<.05). The NG group had significantly greater deep neck flexor performance than NP and PP groups. The stability of the cervical spine also differed significantly among the four groups in the resting head position (p<.05). The head sway angle was significantly smaller in NG group as compared with the other groups. The PP group had the greatest head sway angle in the resting head position. However, there was no significant difference in the stability of the cervical spine among the groups in the erect head position with voluntary contraction of deep neck flexors (p=.57). The results of this study suggest that the deep neck flexor performance is important for maintaining the stability of cervical spine from external perturbation.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.2
• /
• pp.31-40
• /
• 2014

The purpose of the study was to examine model postures at fashion shows with respect to expressing fashion images including elegance and neutral-gender images. Data were gathered from the fashion shows held 2000 S/S through 2009 F/W, when elegance and neutral-gender fashion images were obvious in fashion collections. Three designer brands representing elegance and neutral-gender fashion images were selected by the researcher and fashion specialists including graduate students majoring in fashion. The fashion collection photos representing each image were selected from style.com, a website which contains four world's biggest fashion collections. The results showed different hand positions as a model posture according to fashion images. In the neutral-gender image, 16 photos (47%) showed a hand position at pockets, in the elegance image, 24 photos (82.3%) showed a hand position laying down by the sides. Also, walking pose was shown to be different between two fashion images. In the neutral-gender fashion image, 16 photos (52.9%) revealed a pose of 'natural walk', while 29 photos (100%) showed a pose of 'walk in a straight line' in the elegance imaged fashion. In conclusion, the neutral-gender image photos showed the pocket-positioned hand and the 'natural walk' poses more than elegance image photos, and elegance image photos revealed the hand position laying down by the sides and the 'walk in a straight line' poses than the photos of the neutral-gender image.