• Journal of the Korea Convergence Society
• /
• v.5 no.3
• /
• pp.29-39
• /
• 2014

This study designed to know subjective structure about type of coping with stress of nursing students using Q-methodology. The statement positions on the sorting continuum were scored from +4(representing the highest level of agreement) through 0(at the neutral position on the continuum) through -4(representing the highest level of disagreement). Factor analysis of the data was undertaken using PC QUANL software to determine if any patterns were discernible. The four types extracted eigenvalues greater than 1.0 and explained approximately 52.14% of the variation in responses(31.73, 10.13, 5.73 and 4.65% respectively).: (1) Positive resolve type, (2) Ignore problem type, (3) Self resolution type and (4) Conversation type. The study results can be utilized in both an effective nursing education and clinical practice.

• Journal of Environmental Science International
• /
• v.6 no.3
• /
• pp.277-283
• /
• 1997

SPME deuce was applied to determine the THM in an aqueous solution. The 6 kinds of THM was quantitatively detenuned by using GC-ECD which has the sample eutracted on the SPME fiber from an aqueous solution for 10 min. The THM components were well separated from $CHCl_3$ to the last $CHBr_3$ UHh 13 mons at the condition. 6 kinds of the volatile halogenated organic compounds: $CHCl_3$, $CHBrCl_2$, $CHBrtCl_2$, $CHCl_3$, $C_2Cl$. and $CHBr_3$, showed well defirled calibration graph with good llnearlty from a few ppb level up to several tens of pub concentration. $CHBr_2Cl$ and $C_2C1_4$ were detected from a few samples among the 10 of river samples. CHCl3, however, was detected In 4 sea water samples with the highest of 10 ppd among the pouuted 6 positions. Trace level of $CHBr_2Cl$ and few pub level of $CHBr_3$ were also detected at the other two sample stations. Most of the 13 rain water samples collected from 6 sampling stations were contained ppd level of $CHCl_3$, and also $CHBr_2Cl$, and C_2Cl_4$ were only detected at trace level at a few rain samples among them. We could recognize the fact that our Ut and water enoronment has already been contaminated by certain volatile halogenated organic compounds through this study.

• Journal of Korean Foot and Ankle Society
• /
• v.21 no.2
• /
• pp.55-60
• /
• 2017

Purpose: Stiffness in the first metatarsophalangeal joint after surgery for hallux valgus has been reported. The goal of this study was to test the efficacy of releasing plantar aponeurosis for improving the range of extension in the first metatarsophalangeal joint that was limited after hallux valgus surgery. Materials and Methods: Thirteen patients (1 man, 12 women [17 feet]; median age, 54.4 years; range, 44~69 years) with limited first metatarsophalangeal joint extension after hallux valgus surgery, who underwent an additional procedure of plantar aponeurosis release between March 2015 and August 2015, were included. Subsequently, the passive range of extension in the first metatarsophalangeal joint was evaluated via knee extension and flexion positions. Hallux valgus angle, inter-metatarsal angle, distal metatarsal articular angle, and talo-first metatarsal angle were measured on weightbearing dorsoplantar and lateral radiographs of the foot preoperatively. Results: The mean range of extension for the first metatarsophalangeal joint improved significantly, from $2.5^{\circ}$ to $40.9^{\circ}$ in the knee extension position (p<0.00). The mean extension range for the first metatarsophalangeal joint also improved, from $18.2^{\circ}$ to $43.2^{\circ}$ in the knee flexion position (p<0.00). In all patients, congruence of the first metatarsophalangeal joint was recovered. Conclusion: Plantar aponeurosis release is an effective additional procedure for improving the extension range of the first metatarsophalangeal joint after hallux valgus surgery.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.3
• /
• pp.207-218
• /
• 2017

This study evaluates the difference in visual images according to changes in waist position and pants style. The researcher made twelve stimuli-combination of four pants styles (classic, baggy, skinny, bell-bottom) and three waist positions (0cm, -3cm, -5cm). The test involved 48 female college students. The stimuli were made using the i-Designer computer program. The panels tested the screen images of all manikins wearing pants. A 7-point scale was used to evaluate each image. For the data analysis, the ANOVA and Duncan-test were applied along with an SPSS program. The results of this study are as follows. The visual evaluations by pants style and waist position are composed of seven factors (attractiveness, attention, hip, activity, height, waist, abdomen). Among these factors, attractiveness is evaluated to be the most important factor. The mutual agreement of the visual effect (according to pants style and waist position) was indicated as four factors of attractiveness, attention, waist, and abdomen. The height factor is evaluated to be the most important factor by change in regards to waist position. The 0cm waist position of three styles (classic, baggy, bell-bottom) were evaluated positively in elongated height whereas the -3cm, -5cm waist position of the skinny style was evaluated positively in elongated height. The mutual agreements of visual effect (according to pants style and waist position) were not indicated.

• KDI Journal of Economic Policy
• /
• v.42 no.1
• /
• pp.57-95
• /
• 2020

As a case study of an ex-post evaluation of regulations, in this paper I evaluate the 'uniform settlement rate requirement', a regulation that was introduced in 1986 and that was applied to the international telephone market in the U.S. for more than 20 years. In a bilateral market between the U.S. and a foreign country, each U.S. firm and its foreign partner jointly provide international telephone service in both directions, compensating each other for terminating incoming calls to their respective countries. The per-minute compensation amount for providing the termination service, referred to as the settlement rate, is determined by a bargaining process involving the two firms. In principle, each U.S. firm could have a different settlement rate for the same foreign country. In 1986, however, the Federal Communications Commission introduced the Uniform Settlement Rate Requirement (USRR), which required all U.S. firms to pay the same settlement rate to a given foreign country. The USRR significantly affected the relative bargaining positions of the U.S. and foreign firms, thereby changing negotiated settlement rates. This paper identifies two main routes through which the settlement rates are changed by the implementation of the USRR: the Competition-Induced-Incentive Effect and the Most-Favored-Nation Effect. I then empirically evaluate the USRR by estimating a bargaining model and conducting counterfactual experiments aimed at measuring the size of the two effects of the USRR. The experiments show remarkably large impacts due to the USRR. Requiring a uniform settlement rate, for instance, results in an average 32.2 percent increase in the negotiated settlement rates and an overall 13.7 percent ($3.43 billion) decrease in the total surplus in the U.S. These results provide very strong evidence against the implementation of the USRR in the 1990s and early 2000s.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.106-112
• /
• 2013

In this paper, human exposure of wireless devices was analyzed for various positions of the transmitter. The scenario for the position of the transmitting antenna was decided after discussion with ADD(Agency for Defense Development), and Korean male phantom model developed by ETRI were used to conduct simulations. The SAR values were analyzed by changing the position of the transmitter, and compared with Korean EMF regulations and ICNIRP guidelines. Additionally, human exposure was also investigated for two typical postures which can be posed by war-fighter.

• The korean journal of orthodontics
• /
• v.46 no.5
• /
• pp.310-322
• /
• 2016

Objective: The aim of this study was to determine the optimal loading conditions for pure intrusion of the six maxillary anterior teeth with miniscrews according to alveolar bone loss. Methods: A three-dimensional finite element model was created for a segment of the six anterior teeth, and the positions of the miniscrews and hooks were varied after setting the alveolar bone loss to 0, 2, or 4 mm. Under 100 g of intrusive force, initial displacement of the individual teeth in three directions and the degree of labial tilting were measured. Results: The degree of labial tilting increased with reduced alveolar bone height under the same load. When a miniscrew was inserted between the two central incisors, the amounts of medial-lateral and anterior-posterior displacement of the central incisor were significantly greater than in the other conditions. When the miniscrews were inserted distally to the canines and an intrusion force was applied distal to the lateral incisors, the degree of labial tilting and the amounts of displacement of the six anterior teeth were the lowest, and the maximum von Mises stress was distributed evenly across all the teeth, regardless of the bone loss. Conclusions: Initial tooth displacement similar to pure intrusion of the six maxillary anterior teeth was induced when miniscrews were inserted distal to the maxillary canines and an intrusion force was applied distal to the lateral incisors. In this condition, the maximum von Mises stresses were relatively evenly distributed across all the teeth, regardless of the bone loss.

• Imaging Science in Dentistry
• /
• v.46 no.2
• /
• pp.77-85
• /
• 2016

Purpose: To analyze the relative position of the mandibular foramina (MnFs) in patients diagnosed with skeletal class III malocclusion. Materials and Methods: Computed tomography (CT) images were collected from 85 patients. The vertical lengths of each anatomic point from the five horizontal planes passing through the MnF were measured at the coronoid process, sigmoid notch, condyle, and the gonion. The distance from the anterior ramus point to the posterior ramus point on the five horizontal planes was designated the anteroposterior horizontal distance of the ramus for each plane. The perpendicular distance from each anterior ramus point to each vertical plane through the MnF was designated the horizontal distance from the anterior ramus to the MnF. The horizontal and vertical positions were examined by regression analysis. Results: Regression analysis showed the heights of the coronoid process, sigmoid notch, and condyle for the five horizontal planes were significantly related to the height of the MnF, with the highest significance associated with the MnF-mandibular plane (coefficients of determination ($R^2$): 0.424, 0.597, and 0.604, respectively). The horizontal anteroposterior length of the ramus and the distance from the anterior ramus point to the MnF were significant by regression analysis. Conclusion: The relative position of the MnF was significantly related to the vertical heights of the sigmoid notch, coronoid process, and condyle as well as to the horizontal anteroposterior length of the ascending ramus. These findings should be clinically useful for patients with skeletal class III mandibular prognathism.

• Imaging Science in Dentistry
• /
• v.46 no.2
• /
• pp.127-131
• /
• 2016

Purpose: This study was performed to compare the condylar position in patients with temporomandibular joint disorders (TMDs) and a normal group by using cone-beam computed tomography (CBCT). Materials and Methods: In the TMD group, 25 patients (5 men and 20 women) were randomly selected among the ones suffering from TMD according to the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD). The control group consisted of 25 patients (8 men and 17 women) with normal temporomandibular joints (TMJs) who were referred to the radiology department in order to undergo CBCT scanning for implant treatment in the posterior maxilla. Linear measurements from the superior, anterior, and posterior joint spaces between the condyle and glenoid fossa were made through defined landmarks in the sagittal view. The inclination of articular eminence was also determined. Results: The mean anterior joint space was 2.3 mm in the normal group and 2.8 mm in the TMD group, respectively. The results showed that there was a significant correlation between the superior and posterior joint spaces in both the normal and TMD groups, but it was only in the TMD group that the correlation coefficient among the dimensions of anterior and superior spaces was significant. There was a significant correlation between the inclination of articular eminence and the size of the superior and posterior spaces in the normal group. Conclusion: The average dimension of the anterior joint space was different between the two groups. CBCT could be considered a useful diagnostic imaging modality for TMD patients.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.6
• /
• pp.278-284
• /
• 2014

Objectives: This study used cone-beam computed tomography (CBCT) images to categorize the relationships between the mandibular canal and the roots and investigated the prevalence of nerve damage. Materials and Methods: Through CBCT images, contact and three-dimensional positional relationships between the roots of the mandibular third molar and the mandibular canal were investigated. With this data, prevalence of nerve damage according to the presence of contact and three-dimensional positional relationships was studied. Other factors that affected the prevalence of nerve damage were also investigated. Results: When the mandibular third molar and the mandibular canal were shown to have direct contact in CBCT images, the prevalence of nerve damage was higher than in other cases. Also, in cases where the mandibular canal was horizontally lingual to the mandibular third molar and the mandibular canal was vertically at the cervical level of the mandibular third molar, the prevalence of nerve damage was higher than in opposite cases. The percentage of mandibular canal contact with the roots of the mandibular third molar was higher when the mandibular canal was horizontally lingual to the mandibular third molar. Finally, the prevalence of nerve damage was higher when the diameter of the mandibular canal lumen suddenly decreased at the contact area between the mandibular canal and the roots, as shown in CBCT images. Conclusion: The three-dimensional relationship of the mandibular third molar and the mandibular canal can help predict nerve damage and can guide patient expectations of the possibility and extent of nerve damage.