• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.106-110
• /
• 2005

This research surveys the mechanical properties of worsted fabrics for garment according to the loom characteristics and fabric positions with relation to the warp and weft weaving tensions on the projectile and air-jet looms, which is previously surveyed in the 1st paper. For this purpose, the grey fabrics are processed in dyeing and finishing processes. The mechanical properties of the finished fabrics are measured and discussed with relation to the warp and weft weaving tensions of projectile and air-jet looms and the variations of the fabric mechanical properties according to the fabric positions are also surveyed for investigating the homogeneity of the tailorability and fabric hand.

• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.772-777
• /
• 2004

This research surveys the mechanical properties of worsted for garment according to the loom characteristics and fabric positions with relation to the warp and weaving weft tensions on the 3 types of rapier looms, which is previously surveyed in the 1st paper. For this purpose, the grey fabrics are processed in dyeing and finishing processes. The mechanical properties of the finished fabrics are measured and discussed with relation to the warp and weft weaving tensions of 3 types of rapier looms and the variations of the fabric mechanical properties according to the fabric positions are also surveyed for investigating the homogeneity of the tailorability and fabric hand.

• The Journal of Korean Physical Therapy
• /
• v.25 no.3
• /
• pp.143-148
• /
• 2013

Purpose: The purpose of this study was to investigate whether changes in electromyography (EMG) activations of spinal stability muscles with respiratory demand change were due to changes in respiratory demand or in postural demand. Methods: Forty healthy subjects (19male, 21female, $20.8{\pm}1.9$years old) performed quiet breathing and four different forced respiratory maneuvers (FRM) (Pulsed Lip Breathing, Diaphragmatic Breathing, Combination breathing, and respiratory muscle endurance training breathing) while in sitting and standing positions. EMG data for four muscles (TrA/IO, EO, RA, and ES) were collected and filtered using a band pass filter (20~200Hz) and a notch filter (60, 120, 180Hz). Results: There were no significant differences on percentage of change on %MVIC between QB and FRM (PLB, CB, DB, and RMET) between positions (all p>0.05).

• Journal of KSNVE
• /
• v.7 no.2
• /
• pp.215-222
• /
• 1997

The flow and acoustic fields due to a vortex ring interaction with a rigid sphere are simulated numerically. The flow field is regarded as three-dimensional inviscid and incompressible. The vorticity is assumed to be concentrated inside the finite core of vortex filament. The vortex filament curve, described by parabolic blending curve function, is used to effectively solve the modified Biot-Savart equation. The interaction between a vortex ring and a rigid sphere using the parabolic blending curve is calculated. The trajectory of the vortex ring is obtained with several different initial positions between the ring and the sphere. The force variations acting on the sphere are calculated by using the boundary integral method. Finally, we can also obtain the acoustic signals at the far field observation positions from the force variations acting on the rigid surface. We can find that the dipole axis of the directivity patterns are rotated during the interacting phenomena.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.3
• /
• pp.95-105
• /
• 1997

A diesel engine has become smaller and higher, thus sprays injected in high speed may be impinged on a small combustion chamber wall if there is not enough strong swirl. Those combustion chambers should have proper measures to avoid the spray impinged and deposited on a wall. One of the measures is a chamber prepared impingement parts raised on a chamber wall surface. In this system a spray is injected into the raised pip, broken into a number of smaller drops and spreaded out away from the wall surface. Therefore the fuel droplets distributes over inside of the combustion chamber. In this study, the positions, sizes and angles of the raised land are discussed to help the chamber design using spray wall impaction. The characteristics of the spray impinged on various lands are investigated and compared with each other. Then chamber shapes are discussed with the spray characteristics and the proper positions and size are proposed in some chamber volumes.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.77-80
• /
• 2010

The demand for human security significantly promotes the development of surveillance applications using a multi-sensor integrated UAV system. For more sophisticated operations, the system should provide a sequence of images rectified in a ground coordinate system in realtime. This rectification requires accurate position and attitude of the camera at the time of exposure of each image, which can be estimated through an Aerial Triangulation process using the GPS/INS data and tie points between adjacent images. In this work, the KLT tracker is utilized to obtain the tie points. To satisfy the realtime requirements, we present an approach to speed up the tracker by supplying the initial guessed positions of tie points based on the exterior orientation. The experimental results show that, when the guessed positions are supplied, the KLT tracker consumed less computational time than the ordinary KLT which is more suitable to be incorporated into the realtime image georeferencing process.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.12
• /
• pp.1716-1726
• /
• 2002

본 연구는 국제의류사슬 내 수출위치를 단순조립 생산 (Mere-Assembly Production), 주문자 상표부착 생간방식 (Origin Equipment Manufacturing), 고유상표 생산방식 (Original Brand Name Manufacturing)으로 규명하고, 각 국가의 의류사슬 내 수출 위치가 수입 단가에 어떠한 영향을 미치는지 조사하였다. 1999년 미국Department of commerce의 무역 자료를 사용하여 국제 의류사슬 내 각각의 위치를 점하고 있는 방글라데시, 홍콩, 한국, 이태리를 비교한 결과, 의류사슬 내 위치에 따라 이들 국가로부터의 섬유 및 의류제품의 미국 내 수출단가가 통계 적으로 유의 한 차이를 보이는 것으로 나타났다.

• Speech Sciences
• /
• v.2
• /
• pp.135-147
• /
• 1997

This thesis describes pronunciation differences of vowel lengths between Koreans and Americans speaking English words and sentences. This study also analizes the reasons for these differences with the help of acoustic instruments. Sixteen sentences and eight words were selected as the experimental material. The informants for this study were 9 males; 3 Americans and 6 Koreans, who were asked to pronounce the test words and sentences five times. In this study, the acoustical analysis to measure duration was done through computer digital techniques. According to the results of the experiment, duration of 8 English vowels pronounced between Koreans and Americans shows very different features. When Koreans pronounce English vowels, the duration of the stressed vowel in the sentence-final position is much shorter than in other positions, such as in the sentence-initial and in word position. On the contrary, when Americans pronounce English vowels, the duration of the stressed vowel in the sentence-final position is much longer than in other positions. If the correlation between length and stress were to be studied in a more detailed manner, it would give fundamental help to the study of relation between stress and length.

• Speech Sciences
• /
• v.13 no.4
• /
• pp.43-50
• /
• 2006

The aim of this study was to identify pronunciation difficulties of Korean learners of English in their articulation of English sibilants /dg, g, z/. Forty-five syllables were produced five times by twelve college students. Test scores were measured from the score board made by FluSpeak, a speech training software program, which was designed for English pronunciation practice and improvement. Results show that 1) the subjects had lower scores in producing /g/ than /dg/ and /z/ from all positions, and 2) subjects had lower scores in inter-vocalic position than in pre-vocalic position and in post-vocalic position when they produced /dg/, /g/, and /z/. The results suggest that on the whole Korean learners have much difficulty in producing /g/, and they also have more auditory and articulatory problems in intervocalic than in the other positions when they produce these sibilants.

• Lingua Humanitatis
• /
• v.5
• /
• pp.293-310
• /
• 2003

This study starts with a remark on the frequent usage of the term 'generation culture' in the explanations of cultural change. The term 'generation culture' itself does have neither a clear meaning nor any academic consensus for its operational definition yet. Depending on intuitions or common senses, in most cases, of everyday lift experience, the tends to designate the co-existence of different cultural layers as composing subsystems of a little broader Korean cultural trend. I tried here to analyze different positions and perspectives in the employment of this term, sometimes with strategic intentions of each social groups. Economic or political positions, for example, are intertwined with the quest of identification concerning 'we' and 'other' grouping dynamics in the Age of Globalization, which accelerates the speed of cultural re-territorialization. And the role of consumption activity as a kind of cultural indication has gained more weight in that process. This analysis will remind us, also, of the post-modem society's assumption about the space-and-time in transition, and its fluctuation.