• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.12
• /
• pp.2511-2518
• /
• 2002

Dynamic behaviors and stability of an optical disk drive coupled with an automatic ball balancer (ABB) are analyzed by a theoretical approach. The feeding system is modeled a rigid body with six degree-of-freedom. Using Lagrange's equation, we derive the nonlinear equations of motion for a non -autonomous system with respect to the rectangular coordinate. To investigate the dynamic stability of the system in the neighborhood of the equilibrium positions, the monodromy matrix technique is applied to the perturbed equations. On the other hand, time responses are computed by the Runge -Kutta method. We also investigate the effects of the damping coefficient and the position of ABB on the dynamic behaviors of the system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.3
• /
• pp.17-25
• /
• 1994

Fully developed turbulent flow through three concentric annuli with both the rough inner and outer walls was experimentally investigated for a Reynolds number range Re = 15, 000 - 85, 000. Measurements were carried out for the pressure drop, the positions of zero shear stress and maximum velocity, and the velocity distributions in annuli of radius ratios, ${\alpha}$=0.26, 0.4 and 0.56, respectively. The experimental results showed that the positions of zero shear stress and maximum velocity were only weakly dependent on the Reynolds number.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.4
• /
• pp.59-65
• /
• 2010

This paper presents the study on the contact stress analysis of a pair of mating spur gears during rotation. Contact stress analysis is performed between two spur gear teeth at different contact positions during rotation. An example is presented to investigate the variation of contact stress on a pair of mating gears with contact positions. The variation of contact stress during rotation is compared with the contact stress at lowest point of single tooth contact(LPSTC) and AGMA Equation for contact stress. The results show that contact stress varies along the contact position and gets maximum values in the beginning and end of the contact. In this study, the gear design considering the contact stress on a pair of mating gears is more severe than that of AGMA standard.

• BMB Reports
• /
• v.30 no.4
• /
• pp.253-257
• /
• 1997

Negative ion fast atom bombardment (FAB) mass spectra were found to allow the determination of the linkage positions in a series of underivatized linkage-isomeric oligosaccharides. A previous work (Laine et al., 1988) reported that ion patterns of linkage-isomeric trisaccharides could be distinguished by a positive ion. Negative ion FAB collison-activated dissociation (CAD) mass spectrometry (MS) spectra of trisaccharides exhibited better sensitivity than the positive ion mode and provided specific fragmentation patterns according to the linkage positions. Especially, the fragmentations, m/z 205 in F6 and m/z 221 in G6, not occuring in 1-3 or 1-4 linkage. were an indication of 1-6 linkage, by changing collision energies from + 10 eV to +60 eV. The survival ratios of molecular ions in each collision energy set gave support to previous results in which the order of bond stability was 1-6>1-4>1-3 linkage.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.11
• /
• pp.2665-2671
• /
• 2000

Dimensional Synthesis, which is apart of kinematic synthesis, is to determine the dimensions of a mechanism of preconceived typer for a specified task and prescribed performance. In this paper, in an effort to provide designers with flexibility, a dimensional approximate synthesis method is presented for utilizing prescribed tolerance both the displacement and joint positions of a mechanism to be synthesized. For this, a constrained optimization problem is formulated with displacement parameters and joint positions as variables. The proposed method is applied to the synthesis of a 5-SS multi link suspension mechanism. The method discussed here, however, can be easily applied to any mechanism of which the kinematic constraint equations can be derived.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.396.2-396
• /
• 2002

Dynamic stability and behavior are analyzed fur Pendulum Automatic Dynamic Balancer which is a device to reduce an unbalanced mass of rotors. The nonlinear equations of motion for a system including a Pendulum Balancer are derived with respect to polar coordinate by Lagrange's equations. The perturbation method is applied to find the equilibrium positions and to obtain the linear variation equations. Based on linearized equations, the dynamic stability of the system around the equilibrium positions is investigated by the eigenvalue problem. (omitted)

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.6
• /
• pp.343-352
• /
• 2005

Phonation type index k (PTI In) presents a single and simplified measure of the spectral tilt. which is free from the effects of fundamental frequency and vowel qualify This study investigates PTI k with vowels /i . e. a. o, u/ obtained from 10 Korean male subjects. Specifically. this study tests the significance of differences in PTI k across Positions, Phonation types. vowels, and speakers, respectively The results showed that there was a significant difference in PTI k across positions, Phonation types, vowels. and speakers.

• Journal of the Korean Chemical Society
• /
• v.21 no.4
• /
• pp.256-261
• /
• 1977

The NMR spectrum of newly synthesized compound, trans-2-butenedial bishydrazone is analyzed. It is found that each peak in the AA'BB' spectrum of the compound is consisted of two lines and internal check cannot be accomplished by the usual analytical procedure. Correct line positions are obtained by varying gradually all the parameters, ${\delta}$, K, M, N, L so that the mid points of the doublets may approach observed line positions and the chemical shifts and the coupling constants of the compound are obtained from the result.

• Journal of Industrial Technology
• /
• v.12
• /
• pp.25-36
• /
• 1992

In this paper, we simulate and calculate the stress and output voltage of the beam structure load cells by using FEM as varing physical structure parameters and loading positions. It is proved that stress enhance as the increase of the notch pitch and radius of the load cell, but decrease as the increase of the notch thickness and beam width. The results are good matched for basic formulas of the single fixed beam, and are verified our simulation is correct. Also, it is found that the stress characteristics of the load cell is varied according to loading positions with structure parameters, and caculated output voltage of the load cell approximate to those of the real manufactured ones. As a result, this study will offer efficient design and analysis technique for making special and variety capacity of load cells.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.9
• /
• pp.720-726
• /
• 2003

A virtual keyboard may be efficient as a new mobile input device supporting QWERTY keyboard layout. As a preliminary study for developing a virtual keyboard, the typing pattern of a skilled human is investigated. In the study the touch-positions of the fingers are measured with a touchscreen while five skilled typists perform typing of long sentences. From these measurements it can be observed that the groups of touch-positions are classified into alphabetic characters. Though there are some mismatches, we can find constant distances capable of being discriminated among the groups. Based on the analysis the prediction algorithm of the constant distance is proposed and evaluated, which is useful for realization of a portable virtual keyboard.