• Textile Coloration and Finishing
• /
• v.16 no.4
• /
• pp.36-44
• /
• 2004

This research surveys the differences of fabric mechanical properties according to the different looms and the fabric positions with relation to warp and weft weaving tensions on the Picanol and Omega looms respectively. For this purpose, the grey fabrics woven in the previous paper are processed in dyeing and finishing processes, and the processing shrinkages are measured on each processes such as dryer, scouring, pre-set, dyeing and final-set using the fabric density and width. The mechanical properties of the finished fabrics are measured and discussed with relation to the warp and weft weaving tensions of the two looms and the variations of the fabric mechanical properties according to the fabric positions are also discussed. In addition, the fabric thickness according to the fabric positions such as right, left selvedges and center of the fabrics is also measured and discussed with the characteristics of the Picanol and Omega looms.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.59-68
• /
• 2005

In this study, we establish a theory for dynamic behaviors of an automatic ball balancer, analyze its dynamic characteristics, and provide its design guide line. Equations of motion are derived by using the polar coordinate system instead of the rectangular coordinate system which was previously used in other researches. After non-dimensionalization of the equations, the perturbation method is applied to locate the equilibrium positions and to obtain the linearized equations of motion around the equilibrium positions. The Eigenvalue problem is used to verify the dynamic stability around the equilibrium positions. On the other hand, the time responses are computed from the nonlinear equations of motion by using a time integration method.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.238-240
• /
• 2006

For the method of train position detection, ground-based train position estimation mainly has been applied so far. Ground-based position detection is the way to detect train current positions by installing train position equipments on railroad lines. However, the ground-based methods should install detection equipments on each section, and can only be able to detect train positions from main command center. So this method has several disadvantages such as an discontinuous position detection, an increment in cost of installation and maintenance. To make possible continuous train position detection, and to minimize amount of the cost, the vehicle-based position detection method should be chosen to determine train positions by loading position equipments on vehicles. In this paper, to realize the vehicle-based train position detection method, configuration scheme of train position detection equipment is suggested by using GPS, inertial sensor, speed sensor and its performance is verified by simulations.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.107-110
• /
• 2003

In this paper, the optimal position selection of error sensors and transducers to attenuate interior noise from outside noise sources using active control techniques is presented. To get an optimal control characteristics in adaptive noise control systems, it is necessary to optimize the positions of sensors and transducers. A new type of simulated annealing method has been proposed as searching technique to find optimal transducers and sensors positions in which the sum of the squared pressures at sensor position in an enclosure can be best minimized. Computer simulations and experiments have been performed to show the effectiveness of the proposed method.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.4
• /
• pp.580-584
• /
• 2011

Corner positioning templates are proposed in order to detect the accurate positions of corners that are extracted using 4-directional edge labeling. Top-down and bottom-up directional labeling are used to label the edge segments with four kinds of labels according to their directions. The points whose labels have changed are then determined as corners. The exact positions of the missing corners due to the disconnected edges are detected through the corner positioning templates that are determined according to the labels of start-points and end-points after the two-pass edge labeling. Experiment results show that the proposed method can detect the exact positions of the real corners.

• MALSORI
• /
• no.56
• /
• pp.49-73
• /
• 2005

This study explores the most important temporal cues in the perception of the voiced/voiceless distinction of English plosives in terms of newly defined measures of perception: original signal to response agreement, unit signal to response agreement, and robustness. Seven native speakers of English and three leveled groups of Korean English learners participated in the present study. The results showed that both native speakers of English and Korean groups failed to successfully perceive the voiced/voiceless distinction of English plosives, particularly alveolar plosives, in word-medial trochaic positions. The results also showed that in word-initial and word-medial iambic positions both native speakers of English and Korean groups employ the information in the release burst and aspiration in the perception of the voiced/voiceless distinction, of English plosives, and that in word-final positions native speakers of English employ the information in the preceding vowel, while Korean groups employ the information in the closure interval.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.28 no.2
• /
• pp.87-92
• /
• 1986

The differential equation, which can determine the dynamic critical loads for low parabcoic arches, is derived in this study. The dynamic critical loads of the parabolic arches subjected to a concentrated step load are nummerically analyzed for the changes of load positions. In cases of arches with different end conditions (both hinged, fixed hinged, both fixed), the effect of end conditions and that of the rises are investigated in detail. The summary of the results are the following: 1)The snapthrough does not occur when the rise of arch is very low, and the bifurcation appears clearly as the rise of arch increases. 2)The regions in which the dynamic critical loads are not defined for the both ends fixed are broader than that for the both ends hinged. 3)For all case, the load positions of minimum dynamic critical loads exsit at the near position from the end hinged. Thus, the results obtained in present study show that the magnitude of dynamic critical loads, the load positions of minimum dynamic critical loads and the regions in which the dynamic critical loads are not defined depend on end conditions of arches.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.1
• /
• pp.1-5
• /
• 2010

HOMO(the highest occupied molecular orbital) and LUMO(the lowest unoccupied molecular orbital) of four recalcitrant polycyclic aromatic hydrocarbons (PAHs) were calculated by MOPAC program(CaChe Co). The previous papers which reported experimental results about radical reaction of PAHs were reviewed. The reported radical reaction positions of four PAHs corresponded with predicted positions in which ${\Delta}E$(HOMO-LUMO) was high. From these results, it appears that determining the ${\Delta}E$(HOMO-LUMO) of a PAH is a promising method for predicting the radical reaction position.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.84-88
• /
• 2005

Eye gaze positions evaluation on computer screen uses the human eye as an input device for computer systems is that it gives low resolution. We proposes a method to determine the eye gaze positions on the screen by using two-eye displacements as the information for mapping, and the perspective projection is applied to map the displacements to a position on a computer screen. The experiments were performed on 20 persons and a 17-inch monitor is used with the screen resolution of 1024x768 pixels. Gaze detection error was 3.18 cm (RMS error), with screen is divided into 5x8 and 7x10 positions on a 17-inch monitor. The results showed 100% and 96% correction, respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.125-130
• /
• 2001

Skilled typists can type characters or words without looking at keyboard, relying on the finger's relative position. If the relative positions of the fingers can be identified, a virtual keyboard may be accomplished by applying the concept of "DataGlove" or "FingerRing". The virtual keyboard may be efficient as a new mobile input device supporting QWERTY keyboard layout. For the purpose of investigating skilled typing pattern, in this paper the touch-positions of the fingers are measured with a touchscreen while five skilled typists type a long sentence. From these measurements it can be observed that the groups of touch-positions are classified into alphabet characters. Though there are some overlapped groups we can find constant distances capable of being discriminated among the groups from investigation of the change of touch-position for touch-time. Based on the analysis, the prediction algorithm of the constant distance is proposed and evaluated, which is useful for realization of a portable virtual keyboard.le virtual keyboard.