• Journal of the Society of Disaster Information
• /
• 제20권1호
• /
• pp.192-198
• /
• 2024

Purpose: In order to establish a safety management system led by an orderer in the construction industry, the orderer should be positioned at the peak of the construction industry safety management system and a system that can effectively support safety supervisors who can assist the orderer's role should be reflected. Method: This study collected and analyzed data on the status of safety management of construction business owners through prior research on safety management of construction business owners and a survey on the actual condition of those involved in the construction business. Results: The top priority is to improve the safety awareness and safety management capabilities of the orderer, and through these efforts, the orderer-led safety management system will be established when a national consensus on the responsibility of the orderer, such as the Serious Accident Punishment Act and the Occupational Safety and Health Act, is formed in the event of an accident such as a serious accident. Conclusion: In order to establish a safety management system led by an orderer in the construction industry, it contributes to disaster prevention by positioning the orderer at the peak of the construction safety management system and reflecting a system that can effectively support safety supervisors who can assist the orderer's role.

• Journal of Korea Port Economic Association
• /
• 제39권4호
• /
• pp.107-125
• /
• 2023

The pace of sustainability transition within the maritime industry has been accelerating. This shift primarily necessitates changes in the industry's heavy reliance on fossil fuel-driven ecosystems. Additionally, numerous sustainability laws and regulations, such as the EU's CBAM and IMO's EEXI, have been implemented. This transition is poised to amplify the competitive edge of firms equipped with greater resources, as it introduces substantial operational burdens due to expensive eco-friendly fuel adoption and regulatory compliance. To diverge from the traditional competitive landscape, this paper aims to explore innovative maritime finance models enabling domestic firms to gain competitive advantages on a global scale. Employing analogical reasoning and modeling as a research method, this paper demonstrates that maritime firms can leverage the sustainability transition by aligning sustainable maritime operations with ETS (Emission Trading Schemes). Expanding on this novel approach, the paper delves into potential connections between CCM (Compliance Carbon Market), VCM (Voluntary Carbon Market), and digital asset exchanges. This newly proposed digital/net-zero maritime ecosystem holds the potential to significantly impact the shipping, shipbuilding, and ship finance industries, positioning Busan as a sustainable maritime finance hub. This study holds significance as pioneering research that may stimulate subsequent case-based studies and offer strategic guidance to market participants and policymakers as the maritime industry moves towards a net-zero transition

• Korean Security Journal
• /
• 제13호
• /
• pp.145-168
• /
• 2007

Like to change to the information-oriented society, the guard service needs to be changed. The communication and hardware technology develop rapidly and according to the internet environment change from cable to wireless, modern person can approach every kinds of information service using wireless communication machinery which can be moved such as laptop, computer, PDA, mobile phone and so on, LBS field which presents the needing information and service at anytime, anywhere, and which kinds of device expands it's territory all the more together with the appearance of ubiquitous concept. LBS use the chip in the mobile phone and make to confirm the position of the joining member anytime within several tens centimeters to hundreds meters. LBS can be divided by the service method which use mobile communication base station and apply satellite. Also each service type can be divided by location chase service, public safe service, location based information service and so on, and it is the part which will plan with guard service development. It will be prospected 8.460 hundred million in 2005 years and 16.561 hundred million in 2007 years scale of market. Like this situation, it can be guessed that the guard service has to change rapidly according to the LBS application. Study method chooses documentary review basically, and at first theory method mainly uses the second documentary examination which depends on learned journal and independent volume which published in the inside and the outside of the country, internet searching, other kinds of all study report, statute book, thesis which published at public order research institute of the Regional Police Headquarter, police operation data, data which related with statute, documents and statistical data which depend on private guard company and so on. So the purpose of the study gropes in accordance with the LBS application, and present the problems and improvement method to analyze indirect of manager side of operate guard adaptation service of LBS, government side which has to activate LBS, systematical, operation management, manpower management and education training which related with guard course side which has to study and educate in accordance with application of the new guard service, as well as intents to excellent quality service of guard.

• Nuclear Medicine and Molecular Imaging
• /
• 제42권1호
• /
• pp.61-69
• /
• 2008

Purpose: Micro-pinhole SPECT system with conventional multiple-head gamma cameras has the advantage of high magnification factor for imaging of rodents. However, several geometric factors should be calibrated to obtain the SPECT image with good image quality. We developed a simplified geometric calibration method for rotating triple-head pinhole SPECT system and assessed the effects of the calibration using several phantom and rodent imaging studies. Materials and Methods: Trionix Triad XLT9 triple-head SPECT scanner with 1.0 mm pinhole apertures were used for the experiments. Approximately centered point source was scanned to track the angle-dependent positioning errors. The centroid of point source was determined by the center of mass calculation. Axially departed two point sources were scanned to calibrate radius of rotation from pinhole to center of rotation. To verify the improvements by the geometric calibration, we compared the spatial resolution of the reconstructed image of Tc-99m point source with and without the calibration. SPECT image of micro performance phantom with hot rod inserts was acquired and several animal imaging studies were performed. Results: Exact sphere shape of the point source was obtained by applying the calibration and axial resolution was improved. Lesion detectibility and image quality was also much improved by the calibration in the phantom and animal studies. Conclusion: Serious degradation of micro-pinhole SPECT images due to the geometric errors could be corrected using a simplified calibration method using only one or two point sources.

• Progress in Medical Physics
• /
• 제20권2호
• /
• pp.97-105
• /
• 2009

Absorbed dose to water based protocols recommended that plane-parallel chambers be calibrated against calibrated cylindrical chambers in a high energy electron beam with $R_{50}$>7 $g/cm^2$ (E${\gtrsim}$16 MeV). However, such high-energy electron beams are not available at all radiotherapy centers. In this study, we are compared the absorbed dose to water determined according to cross-calibration method in a high energy electron beam of 16 MeV and in electron beam energies of 12 MeV below the cross-calibration quality remark. Absorbed dose were performed for PTW 30013, Wellhofer FC65G Farmer type cylindrical chamber and for PTW 34001, Wellhofer PPC40 Roos type plane-parallel chamber. The cylindrical and the plane-parallel chamber to be calibrated are compared by alternately positioning each at reference depth, $Z_{ret}=0.6R_{50}-0.1$ in water phantom. The $D_W$ of plane-parallel chamber are derived using across-calibration method at high-energy electron beams of 16, 20 MeV. Then a good agreement is obtained the $D_W$ of plane-parallel chamber in 12 MeV. The agreement between 20 MeV and 12 MeV are within 0.2% for IAEA TRS-398.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제32권4_1호
• /
• pp.299-309
• /
• 2014

This paper evaluated the possibility for 1/5,000 digital topographic mapping by using PLEIADES images of 0.5m GSD(Ground Sampling Distance) resolution that has recently launched. Those results of check points by applying the initial RPC(Rational Polynomial Coefficient) of PLEIADES images came out as; RMSE of those were $X={\pm}1.806m$, $Y={\pm}2.132m$, $Z={\pm}1.973m$. Also, if we corrected geometric correction using 16 GCP(Ground Control Point)s, the results of RMSE became $X={\pm}0.104m$, $Y={\pm}0.171m$, $Z={\pm}0.036m$, and t he RMSE of check points were $X={\pm}0.357m$, $Y={\pm}0.239m$, $Z={\pm}0.188m$; which of those results indicated the accuracy of standard adjustment complied in error tolerances of the 1/5,000 scale. Additionally, we converted coordinates of points, obtained by TerraSAR. for comparing with measurements from GPS(Global Positioning System) surveying. The RMSE of comparing converted and GPS points were $X={\pm}0.818m$, $Y={\pm}0.200m$, $Z={\pm}0.265m$, which confirmed the possibility for 1/5,000 digital topographic mapping with PLEIADES images and GCPs. As method of obtaining GCPs in unaccessible area, however, the outcome evaluation of GCPs extracted from TerraSAR images was not acceptable for 1/5,000 digital topographic mapping. Therefore, we considered that further researches are needed on applicability of GCPs extracted from TerraSAR images for future alternative method.

• The Korean Journal of Nuclear Medicine Technology
• /
• 제23권1호
• /
• pp.75-79
• /
• 2019

Purpose Cadmium-zinc-telluride (CZT) camera with semiconductor detector is capable of dynamic myocardial perfusion SPECT for coronary flow reserve (CFR). Image acquisition with the heart positioned within 2 cm in the center of the quality field of view (QFOV) is recommended because the CZT detector based on focused multi-pinhole collimators and is stationary gantry without rotation. The aim of this study was to investigate the optimal method for measuring position of the heart within the center of the QFOV when performing dynamic myocardial perfusion SPECT with the Discovery NM 530c camera. Materials and Methods From June to September 2018, 45 patients were subject to dynamic myocardial perfusion SPECT with D530c. For accurate heart positioning, the patient's heart was scanned with a mobile ultrasound and marked at the top of the probe where the mitral valve (MV) was visible in the parasternal long-axis view (PLAX). And, the marked point on the patient's body matched with the reference point indicated CZT detector in dynamic stress. The heart was positioned to be in the center of the QFOV in rest. The coordinates of dynamic stress and rest were compared statistically. Results The coordinates of the dynamic stress using mobile ultrasound and those taken of the rest were recorded for comparative analysis with regard to the position of the couch and analyzed. There were no statistically significant differences in the coordinates of Table in & out, Table up & down, and Detector in & out (P > 0.05). The difference in distance between the 2 groups was measured at $0.25{\pm}1.00$, $0.24{\pm}0.96$ and $0.25{\pm}0.82cm$ respectively, with no difference greater than 2 cm in all categories. Conclusion The position of the heart taken using mobile ultrasound did not differ significantly from that of the center of the QFOV. Therefore, The use of mobile ultrasound in dynamic stress will help to select the correct position of the heart, which will be effective in clinical diagnosis by minimizing the image quality improvement and the patient's exposure to radiation.

• Asia Marketing Journal
• /
• 제15권4호
• /
• pp.103-129
• /
• 2014

Differentiated positioning becomes increasingly difficult when brand salience weakens. Also, the daily increase in new media use and information load has led to a social climate that regards advertising stimuli as spamming. For these reasons, the focus of advertisement-related communication is shifting from persuading consumers through the direct delivery of information to an emphasis on appealing to their emotions using matching stimuli to enhance persuasion effects. Recently, both academia and industry have increasingly shown an interest in storytelling methods that can generate positive emotional responses and attitude changes by arousing consumers' narrative processing. The purpose of storytelling is to elicit consumers' emotional experience to meet the objectives of advertisement producers. Therefore, the most important requirement for storytelling in advertising is that it evokes consumers' sympathy for the main character in the advertisement. This does not involve advertisements directly persuading consumers, but rather, consumers themselves finding an answer through the advertisement's story. Thus, consumers have an indirect experience regarding the product features and usage through empathy with the advertisement's main character. In this study, we took the results of a precedent study as the starting point, according to which consumers' emotional response can be altered depending on the storytelling methods adopted for storytelling ads. Previous studies have reported that drama-type and vignette-type storytelling methods have a considerably different impact on the emotional responses of advertising audiences, due to their different structural characteristics. Thus, this study aims to verify that emotional response aroused by different types of advertisement storytelling (drama ads vs. vignette ads) can be controlled by the socio-psychological gender difference of advertising audiences and that the interaction effects between the socio-psychological gender differences of the audience and the gender stereotype of emotions to which advertisements appeal can exert an influence on emotional responses to types of storytelling in advertising. To achieve this, an experiment was conducted employing a between-group design consisting of 2 (storytelling type: drama ads vs. vignette ads) × 2 (socio-psychological gender of the audience: masculinity vs. femininity) × 2 (advertising appeal emotion type: male stereotype emotion vs. female stereotype emotion). The experiment revealed that the femininity group displayed a strong and consistent empathy for drama ads regardless of whether the ads appealed to masculine or feminine emotions, whereas the masculinity group displayed a stronger empathy for drama ads appealing to the emotional types matching its own gender as well as for vignette ads. The theoretical contribution of this study is significant in that it sheds light on the controllability of the audiences' emotional responses to advertisement storytelling depending on their socio-psychological gender and gender stereotype of emotions appealed to through advertising. Specifically, its considerable practical contribution consists in easing unnecessary creative constraints by comprehensively analyzing essential advertising strategic factors such as the target consumers' gender and the objective of the advertisement, in contrast to the oversimplified view of previous studies that considered emotional responses to storytelling ads were determined by the different types of production techniques used. This study revealed that emotional response to advertisement storytelling varies depending on the target gender of and emotion type appealed to by the advertisement. This suggests that an understanding of the targeted gender is necessary prior to producing an advertisement and that in deciding on an advertisement storytelling type, strategic attention should be directed to the advertisement's appeal concept or emotion type. Thus, it is safe to use drama-type storytelling that expresses masculine emotions (ex. fun, happy, encouraged) when the advertisement target, like Bacchus, includes both men and women. For brands and advertisements targeting only women (ex. female clothes), it is more effective to use a drama-type storytelling method that expresses feminine emotions (lovely, romantic, sad). The drama method can be still more effective than the vignette when women are the main target and a masculine concept-based creative is to be produced. However, when male consumers are targeted and the brand concept or advertisement concept is focused on feminine emotions (ex. romantic), vignette ads can more effectively induce empathy than drama ads.

• Geophysics and Geophysical Exploration
• /
• 제8권4호
• /
• pp.262-269
• /
• 2005

Since the buried cultural relics are three-dimensional (3-D) objects in nature, 3-D survey is more preferable in archeological exploration. 3-D Ground Penetrating Radar (GPR) survey based on very dense data in principle, however, might need much higher cost and longer time of exploration than other geophysical methods commonly used for the archeological exploration, such as magnetic and electromagnetic methods. We developed a small-scale continuous data acquisition system which consists of two sets of GPR antennas and the precise positioning device tracking the moving-path of GPR antenna automatically and continuously. Since the high cost of field work may be partly attributed to establishing many profile lines, we adopted a concept of data acquisition at arbitrary locations not along the pre-established profile lines. Besides this hardware system, we also developed several software packages in order to effectively process and visualize the 3-D data obtained by the developed system and the data acquisition concept. Using the developed system, we performed 3-D GPR survey to investigate the possible historical remains of Baekje Kingdom at Buyeo city, South Korea, prior to the excavation. Owing to the newly devised system, we could obtain 3-D GPR data of this survey area having areal extent over about $17,000m^2$ within only six-hours field work. Although the GPR data were obtained at random locations not along the pre-established profile lines, we could obtain high-resolution 3-D images showing many distinctive anomalies, which could be interpreted as old agricultural lands, waterways, and artificial structures or remains. This cast: history led us to the conclusion that 3-D GPR method is very useful not only to examine a small anomalous area but also to investigate the wider region of the archeological interests.

• Progress in Medical Physics
• /
• 제10권2호
• /
• pp.63-71
• /
• 1999

For the purpose of utilization in 3-D conformal radiotherapy and whole body radiosurgery, the Whole Body 3-Dimensional Topographic Radiation Therapy System has been developed. Whole body frame was constructed in order to be installed on the couch. Radiopaque catheters were engraved on it for the dedicated coordinate system and a MeV-Green immobilizer was used for the patient setup by the help of side panels and plastic rods. By designing and constructing the whole body frame in this way, geometrical limitation to the gantry rotation in 3-D conformal radiotherapy could be minimized and problem which radiation transmission may be altered in particular incident angles was solved. By analyzing CT images containing information of patient setup with respect to the whole body frame, localization and coordination of the target is performed so that patient setup error may be eliminated between simulation and treatment. For the verification of setup, the change of patient positioning is detected and adjusted in order to minimize the setup error by means of comparison of the body outlines using 3 CCTV cameras. To enhance efficiency of treatment procedure, this work can be done in real time by watching the change of patient setup through the monitor. The method of image subtraction in IDL (Interactive Data Language) was used to visualize the change of patient setup. Rotating X-ray system was constructed for detecting target movement due to internal organ motion. Landmark screws were implanted either on the bones around target or inside target, and variation of target location with respect to markers may be visualized in order to minimize internal setup error through the anterior and the lateral image information taken from rotating X-ray system. For CT simulation, simulation software was developed using IDL on GUI(Graphic User Interface) basis for PC and includes functions of graphic handling, editing and data acquisition of images of internal organs as well as target for the preparation of treatment planning.