• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.97-98
• /
• 2014

Vibration signal has been widely utilized in the diagnostics of rotating mechanical system. Diagnostics systems in rotating machinery are depends on the vibration data which are acquired from the system. However, the characteristics of acquired data can be vary according to the position of anomaly installed or the position of data acquired. In this research, the coordinate transform of journal bearing vibration signal was proposed to overcome the limitation mentioned above. Journal bearing systems are equipped two gap sensors with ninety degree angles, and it can enable to generate coordinate transformed signals in arbitrary angle domain. More abundant information for each normal or anomaly conditions are obtained from coordinate transformation than only the data of the existing measuring position, then we have developed a reliable and robust diagnosis algorithm for journal bearing system.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.144-151
• /
• 2006

Sound generated from a moving vehicle often carries information on the condition of vehicle, for example, whether it has faults or not, where the fault exists. The latter is possible especially by MFAH(moving frame acoustic holography) and beamforming method. MFAH is applicable to the sound source of pure tone or narrow band noise. For the beamforming method, we have to know what kind of wave the sound source radiates, for example, plane wave or spherical wave. That is, whether the above methods are applicable depends on the characteristics of sound source. To apply these methods to the fault detection, we have to know the characteristics of wave from faults. In this research, a machine diagnosis technique based on the above holographic approaches is introduced to find the position of faults. The signal due to faults is modeled based on the fact that the faults radiate impulsive noise, and analyzed in time and frequency domain. The way how MFAH and beamforming method can be used is introduced to find the position of source.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.1
• /
• pp.60-66
• /
• 1996

Brushless DC(BLDC) motor have been increasingly used in machine tools and robotics applications due to the reliability and the efficiency. In control of BLDC motor, it is important to construct the controller which is robust to parameter variations and external disturbances. Variable structure controller(VSC) has been known as a powerful tool in robust control of time varying systems. In practical systems, however, VSC has a high frequency chattering which deteriorates system performances. In this paper, a binary controller(BC) which takes the form of VSC and MRAC combined is presented to solve this problem. BC consists of the primary loop controller and the external loop controller to change the gain of primary loop controller smoothly. So it can generate the continuous control input and is insensitive to parameter variations in the given domain. To confirm the validity, various investigations of control characteristics for various design parameters in a position control system of BLDC motor are carried out. (author). 11 refs., 18 figs., 1 tab.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.9
• /
• pp.14-22
• /
• 2015

TIn this paper, a centering method for an unfocused input character using the spherical domain system and the centering character to use the shift invariant feature for the recognition system is proposed. A system for recognition is implemented using the centroid method with coordinate average values, and the results of an above 78.14% average differential ratio for the character features were obtained. It is possible to extract the shift invariant feature using spherical transformation similar to the human eyeball. The proposed method, which is feature extraction using spherical coordinate transform and transformed extracted data, makes it possible to move the character to the center position of the input plane. Both digital and optical technologies are mixed using a spherical coordinate similar to the 3 dimensional human eyeball for the 2 dimensional plane format. In this paper, a centering character feature using the spherical domain is proposed for character recognition, and possibilities for the recognized possible character shape as well as calculating the differential ratio of the centered character using a centroid method are suggested.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.5
• /
• pp.1233-1246
• /
• 2018

With the proliferation of smart mobiles, disassembly techniques for position-independent code (PIC) composed of ARM architecture instructions in computer security are becoming more important. However, existing techniques have been studied on x86 architecture and are focused on solving problems of non-PIC and generality. Therefore, the accuracy of the collected address information is low to apply to advanced security technologies such as binary measurement. In this paper, we propose a disassembly technique that reflects the characteristics of PIC composed of ARM instructions. For accuratly collecting traceable addresses, we designed value-set analysis having symbol-form domain. To solve the main problem of disassembly, we devised a heuristic using the characteristics of the code generated by the compiler. To verify the accuracy and effectiveness of our technique, we tested 669 shared libraries and executables in the Android 8.1 build, resulting in a total disassembly rate of 91.47%.

• Composites Research
• /
• v.35 no.1
• /
• pp.8-12
• /
• 2022

Analysis of defect signals inside glass fiber reinforced polymer (GFRP) was conducted through deconvolution of terahertz (THz) wave. The GFRP specimen with internal defects was manufactured and the THz signal was measured through the reflection mode of the Terahertz Time-Domain Spectroscopy (THz-TDS) system. For deconvolution of the measured THz signal, the peak position of the THz signal was amplified through Normalized Cross Correlation (NCC) of the incident and detected THz signals. The position and intensity of the amplified peak were extracted as impulse, and the extracted signal of the impulse position was removed from the THz original signal. By repeating the process, the critical impulses, which represent boundary of the specimen, were derived. The deconvolution process was verified by confirming that the original THz signal without noise can be restored through the convolution of the critical impulses and the incident signal. From the derived critical impulses, the thickness of the internal defect in the GFRP was calculated through the detection time of impulses within 15 ㎛ accuracy.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.7
• /
• pp.1104-1110
• /
• 2006

Recombinant antibody-toxin is a bifunctional protein that binds and kills a target cell expressing a specific antigen on the surface of the cell, and its structure is chimeric, in which a toxin is fused to an antigen-binding domain such as scFv or Fab. Divalent antibody-toxin molecules showed higher cytotoxicities against cancer cell lines than monovalent molecules. However, the yields of the divalent molecules were very low. In this study, we introduced the CH2, CH3, or CH2-CH3 (=Fc) domain of antibody in the middle of the Fab-toxin between the hinge region of human IgG1 and the toxin domain to increase the yield. The covalently bonded dimer could be formed by three disulfide bridges from cysteine residues in the hinge region. The molecule with the CH3 domain showed about 3-fold higher dimerization yield than previously constructed Fab-toxin molecules, while maintaining the cytotoxic activity comparable to that of scFv-toxin. However, the introduction of CH2 or Fc domain to the same position showed little effect on the dimerization yield. We also observed that the introduction of the CH3 region made it possible to form noncovalently associated dimer molecules.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.9
• /
• pp.1374-1379
• /
• 2015

Time Domain Reflectometry(TDR) using microwave bands, including broadband spectrum that occurs at the range of rates that start between partial discharge position it easier to make the techniques that could be measured. Partial discharge in the Gas Insulated Switchgear(GIS), the dielectric constant in the band more than GHz different the insulating material if you want to organize, and the insulating material regardless of how partial discharge position in the SF6 gas Partial Discharge by applying the heritability estimated its position, but the position error occurred about 23 percent of the existing way, correct in not suitable location tracking the outbreak PD. This technique the rate of other dielectric that make up the power apparatus heterology is measured at the function to slow the progression of the electromagnetic waves apart by calculating the partial discharge as the location, A simple way to track. Dielectric using other methods proposed new structure can calculate the speed of heritability PD is occurring can measure.

• YAKHAK HOEJI
• /
• v.43 no.6
• /
• pp.743-750
• /
• 1999

Human and bovine dopamine transporters (DAT) demonstrate discrete functional differences in the dopamine (DA) transport and cocaine binding. The functional analyses on the chimeras of human and bovine DAT have revealed that the region from the $133^{rd}{\;}to{\;}186^{th}$ residue(encompassing the $3^{rd}$ trans-membrane domain (TM) is responsible for the substrate transport and cocaine binding. The present studies have been done to find out the specific amino acid(s) which is essential for the binding of cocaine to DAT by interchanging the amino acids in that region between human and bovine DAT. When isoleucine, the $152^{nd}$ residue of chimera B3 (bovine DAT sequence) was transformed back to valine, the human DAT residue at the identical position, the cocaine binding was remarkably recovered to 98% of the human DAT values. In addition, the cocaine binding of the human DAT was decreased by 57% by substituting isoleucine for valine at position 152. When isoleucine at position 152 of the chimera B3 was converted to the other amino acids to provide an possible molecular basis for the functional role of the $152^{nd}$ residue, only the conversion to alanine among acids tested significantly the cocaine by 34%, but these effect were not as much as those by the conversion to valine. In conclusion, valine at position 152 is a crucial amino acid for the interaction of cocaine to the DAT.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.3
• /
• pp.430-438
• /
• 2019

For a pump or a compressor motor, a high periodic load torque variation is induced by the mechanical works, and it causes system vibration and noise. To minimize these problems, load torque compensation method, injecting periodic torque current, could be utilized. However, with the sensorless control method, which is usually utilized in the pump and compressor for low cost, the periodic torque current degrades the accuracy of the rotor position estimation owing to the inductance variation. This paper analyzes the rotor position and speed estimation error of sensorless control method with constant motor parameters under period loading. Assuming the constant speed by the accurate load torque compensation, the speed error equation is derived in frequency domain with inductance depending on the stator current. Further, it is also shown that the rotor position error could be minimized by compensating the inductance variation. The simulation and experimental results verify that the derived speed error model and the validity of the inductance compensation method.