• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.2
• /
• pp.14-21
• /
• 2019

In recent years, the use of composite structures has become commonplace in various fields such as aerospace, architecture, and civil engineering. In this study, A method is proposed to find optimal position of bolt hole for fastening of composite structure. In the case of composites, stress distribution is very complicated, and design optimization based on this phenomenon increases difficulty. In selecting the optimum position of the bolt hole, the response surface method(rsm), which is a method of optimization, was applied. A response surface was created based on design points by multiple finite element analyzes. The position of the bolt hole that minimizes the stress when bolting on the response surface was found. The distribution of the stress at the position of the optimal hole was much lower than that of the initial design. Based on the results of this study, it is possible to increase the design safety factor of the structure by appropriately selecting the position of the bolt hole according to various load types when designing the structure and civil structure.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.2
• /
• pp.169-176
• /
• 2012

GPS(Global Positioning System) is widely used for the position estimation of an aerial vehicle. However, GPS may not be available due to hostile jamming or strategic reasons. A vision-based position estimation method can be effective if GPS does not work properly. In mountainous areas without any man-made landmark, a horizon is a good feature for estimating the position of an aerial vehicle. In this paper, we present a new method to estimate the position of the aerial vehicle equipped with a forward-looking infrared camera. It is assumed that INS(Inertial Navigation System) provides the attitudes of an aerial vehicle and a camera. The horizon extracted from an infrared image is compared with horizon models generated from DEM(Digital Elevation Map). Because of a narrow field of view of the camera, two images with a different camera view are utilized to estimate a position. The algorithm is tested using real infrared images acquired on the ground. The experimental results show that the method can be used for estimating the position of an aerial vehicle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.2
• /
• pp.179-189
• /
• 2017

This paper is the fifth investigation on the methods of evaluating flow characteristics in a steady flow bench. In previous studies, several assumptions used in the steady flow bench were examined and it was concluded that the assumption of the solid rotation may lead to serious problems. In addition, though the velocity profiles were improved as the measuring position went downstream, the distributions were far from ideal regardless of the valve angle and evaluation position. The eccentricities were also not sufficiently small to disregard the effect on impulse swirl meter (ISM) measurement. Therefore, the effect of these distribution and eccentricity changes according to the positions needs to be analyzed to discuss the method of flow characteristics estimation. In this context, the effects of evaluation position on the steady flow characteristics were studied. For this purpose, the swirl coefficient and swirl ratio were assessed and compared via measurement of the conventional ISM and calculation based on the velocity by particle image velocimetry(PIV) from 1.75B, 1.75 times bore position apart from the cylinder head, to the 6.00B position. The results show that the swirl coefficients by ISM strictly decrease and the curves as a function of the valve lift become smooth and linear as the measuring position goes downstream. However, the values through the calculation based on the PIV are higher at the farther position due to the approach of the tangential velocity profile to ideal. In addition, there exists an offset effect between the velocity distribution and eccentricity in the low valve lift range when the coefficients are estimated based on the swirl center. Finally, the curve of the swirl ratio by ISM and by PIV evaluation as a function the measuring position intersect around 5.00B plane except at $26^{\circ}$ valve angle.

• Korean Journal of Social Welfare
• /
• v.56 no.3
• /
• pp.227-251
• /
• 2004

The objective of this study is to explore the characteristic of welfare for the disabled on the focus of 'Welfare Law for the Disabled' through multiple paradigm of disability. A proper understanding of disability theory requires more than a distinction between individual and social model approaches. It is also helpful to distinguish between materialist and idealist explanations. These two dimensions are used to generate a four-fold typology. In 'Welfare Law for the Disabled of 1981', individual materialist position was dominated. In 'Welfare Law for the Disabled of 1989', individual idealist position dawned to appear. In 'Welfare Law for the Disabled of 1999' which expanded diverse community services, individual idealist position was strengthened and social creationist position started to appear. Several characteristics are found out after analysis of 'Welfare Law for the Disabled of 1999'. Individual materialist position, individual idealist position, and social creationist position are mixed. Though the goal of the law is based on social creationist position, the central policies and measures are based on individual materialist position and individual idealist position. So it is necessary to amend 'Welfare Law for the Disabled' in the direction of including social creationist position and social constructionist position.

• Journal of Korean Academy of Nursing
• /
• v.36 no.2
• /
• pp.353-360
• /
• 2006

Purpose: This study was done to investigate the effects of backrest elevation of 0 degree and 30 degrees that minimize the risk of increasing ICP when CVP is measured. Methods: Subjects were sixty-four patients who stayed in the neurosurgical intensive care unit after brain surgery at two university-based hospitals. CVP, blood pressure, heart rate and ICP were measured along with position changes in order of backrest position with primary 30 degrees backrest position, 0 degree backrest position and secondary 30 degrees backrest position. For data analysis, one-group, repeated-measures analysis of variance design was used in SAS program. Results: Backrest elevations from 0 degree to 30 degrees did not alter the CVP without increasing the ICP. Therefore, 30 degrees backrest position is a preventive position without increasing ICP. Conclusion: 30 degrees backrest position might be appropriate for brain injury patients when CVP is measured.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.391-398
• /
• 2009

In this study, we introduce the design methodology of an optimized fuzzy cascade controller with the aid of hierarchical fair competition-based genetic algorithm(HFCGA) for ball & beam system. The ball & beam system consists of servo motor, beam and ball, and remains mutually connected in line in itself. The ball & beam system determines the position of ball through the control of a servo motor. The displacement change the position of ball leads to the change of the angle of the beam which determines the position angle of a servo motor. Consequently the displacement change of the position of the moving ball and its ensuing change of the angle of the beam results in the change of the position angle of a servo motor. We introduce the fuzzy cascade controller scheme which consists of the outer(1st) controller and the inner(2nd) controller as two cascaded fuzzy controllers, and auto-tune the control parameters(scaling factors) of each fuzzy controller using HFCGA. The inner controller controls the position of lever arm which corresponds to the position angle of a servo motor and the outer controller decides the set-point value of the inner controller. HFCGA is a kind of parallel genetic algorithms(PGAs), and helps alleviate the premature convergence being generated in conventional genetic algorithms (GAs). For a detailed comparative analysis from the viewpoint of the performance results and the design methodology, the proposed method for the ball & beam system which is realized by the fuzzy cascade controller based on HFCGA, is presented in comparison with the conventional PD cascade controller based on serial genetic algorithms.

• Physical Therapy Korea
• /
• v.31 no.2
• /
• pp.114-122
• /
• 2024

Background: The peroneus longus (PL) and peroneus brevis (PB) function as the primary muscles of eversion, a movement closely associated with tibial external rotation for ankle mortise stability. Ankle motion and tibial rotation vary based on different ankle and knee positions. Objects: This study aimed to investigate the PL, PB, and biceps femoris (BF) muscle activation and eversion strength during side-lying isometric eversion exercise based on different ankle positions (neutral [N] and plantarflexion [PF]) and knee positions (90° flexion [KF] and extension [KE]). Methods: Thirty healthy adults with an Ankle Joint Functional Assessment Tool score of ≥ 22 were recruited (mean age = 24.8 ± 3.1 years). Maximal isometric eversion strength and submaximal muscle activation of the PL, PB and BF were measured during isometric eversion exercise in side-lying. A 2 × 2 repeated measures analysis of variance was performed to investigate differences in muscle activation and strength. Results: The PL and PB muscle activation showed significant main effects with the knee and ankle positions (p < 0.05); activation was greater in the KE and PF positions than in the KF and N positions. The BF muscle activation showed a significant interaction effect with knee and ankle positions, which was greater in knee extension and ankle plantarflexed (KEPF) position than in knee flexion and ankle plantarflexed (KFPF) position (p < 0.05). Eversion strength showed a significant main effect only in ankle position (p < 0.05) and was greater in the N position than in the PF position. Conclusion: The results of this study indicate that the KEPF position can be recommended to facilitate contraction of the PL and PB during side-lying eversion exercise. Furthermore, the effects of the knee-ankle positions should be considered for measuring ankle eversion strength and implementing the isometric submaximal side-lying eversion exercise.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.186-201
• /
• 2021

As autonomous driving technology advances, the accuracy of the vehicle position is important for recognizing the environments around driving. Map-matching localization techniques based on high definition (HD) maps have been studied to improve localization accuracy. Because conventional map-matching techniques estimate the vehicle position based on an HD map reference dataset representing the center of the lane, the estimated position does not reflect the deviation of the lateral distance within the lane. Therefore, this paper proposes a localization system based on the reference lateral position dataset extracted using image processing and HD maps. Image processing extracts the driving lane number using inverse perspective mapping, multi-lane detection, and yellow central lane detection. The lane departure method estimates the lateral distance within the lane. To collect the lateral position reference dataset, this approach involves two processes: (i) the link and lane node is extracted based on the lane number obtained from image processing and position from GNSS/INS, and (ii) the lateral position is matched with the extracted link and lane node. Finally, the vehicle position is estimated by matching the GNSS/INS local trajectory and the reference lateral position dataset. The performance of the proposed method was evaluated by experiments carried out on a highway environment. It was confirmed that the proposed method improves accuracy by about 1.0m compared to GNSS / INS, and improves accuracy by about 0.04m~0.21m (7~30%) for each section when compared with the existing lane-level map matching method.

• Korea Multimedia Society
• /
• v.12 no.4
• /
• pp.28-40
• /
• 2008

Vehicular ad hoc networks (VANETs) are a practical application class of wireless ad hoc networks, which consist of moving vehicles equipped with radio communication capabilities that collaborate to form a temporary network. This paper addresses issues and protocols of multihop routing in such emerging networks in the context of safety and infotainment applications. Due to the highly dynamic mobility of vehicles, frequent link breakage and short connection time are inevitable and, thus, the routing is a challenging task and interest for many researchers and industrial community. The frequent and dynamic change of topology makes the topology-based routing unreliable but the position-based routing more effective. The position-based routing consists of the location service which maps a node id to a geo-graphical position and the forwarding scheme which selects the next hop based on geo-graphical information of the node, its neighbors and the destination. The routing techniques are further categorized into geographical forwarding, trajectory forwarding and opportunistic forwarding based on the forwarding scheme. In this paper, we first present the distinguished properties of VANETs and the challenges and intractable issues posed in designing the routing protocols, followed by the comprehensive survey of existing routing protocols. Then, the different routing protocols designed for VANETs are compared in terms of characteristics, performance and application domains.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.1
• /
• pp.41-46
• /
• 2006

Ubiquitous location based services, offer helpful services anytime and anywhere by using real-time location information of objects based on ubiquitous network. Particularly, autonomous mobile robots can be a solution for various applications related to ubiquitous location based services, e.g. in hospitals, for cleaning, at airports or railway stations. However, a meaningful and still unsolved problem for most applications is to develop a robust and cheap positioning system. A typical example of position measurements is dead reckoning that is well known for providing a good short-term accuracy, being inexpensive and allowing very high sampling rates. However, the measurement always has some accumulated errors because the fundamental idea of dead reckoning is the integration of incremental motion information over time. The other hand, a localization system using RFID offers absolute position of robots regardless of elapsed time. We construct an absolute positioning system based on RFID and investigate how localization technique can be enhanced by RFID through experiment to measure the location of a mobile robot. Tags are placed on the floor at 5cm intervals in the shape of square in an arbitrary space and the accuracy of position measurement is investigated . To reduce the error and the variation of error, a weighting function based on Gaussian function is used. Different weighting values are applied to position data of tags since weighting values follow Gaussian function.