• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.891-898
• /
• 2001

This paper develops a master manipulator which can reflect a force from a slave manipulator effectively. It many have a big workspace, can represent a human operators manipulation perfectly, and is composed of a position control part, an orientation control part and an end effector control part. This paper also develops a graphic simulator using the Visual C++ and OpenGL in the Window operating system. It can be used to make a virtual slave manipulator and set a virtual working environment, and provide a visual information from a desired view point. A virtual teleoperation system is developed by connecting the developed master manipulator to the graphic simulator using an interfacing hardware bilaterally. It is used for performing a virtual object exploration experiment. In the experiment, two virtual objects are used. They are virtual wall and virtual hexahedron which have 0.7N/mm and 2.2 N/mm stiffness respectively. The experiments are performed under six different working conditions. The experiment results will show the effectiveness of the reflected force from the slave manipulator for improving the efficiency and stability of the teleoperation task.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.253-258
• /
• 2001

This paper introduces a simple nonlinear adaptive control method for pipeline inspection gauge (PIG) flow in natural gas pipeline. The dynamic behavior of the PIG depends on the different pressure across its body and the bypass flow through it. The system dynamics includes: dynamics of driving gas flow behind the PIG, dynamics of expelled gas in front of the PIG, and dynamics of the PIG. The method of characteristics (MOC) and Runger-Kuta method are used to solve the dynamics of flow. The PIG velocity is controlled through the amount of bypass flow across its body. A simple nonlinear adaptive controller based on the backstepping method is introduced. To derive the controller, three system parameters should be measured: the PIG position, its velocity and the velocity of bypass flow across the PIG body. The simulation has been done with a pipeline segment in the KOGAS low pressure system, Ueijungboo-Sangye line to verify the effectiveness of the proposed controller. Three cases of interest are considered: the PIG starts to move at its launcher, the PIG arrives at its receiver and the PIG restarts after stopping in the pipeline by obstruction. The simulation results show that the proposed nonlinear adaptive controller attained good performance and can be used for controlling the PIG velocity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.4
• /
• pp.304-313
• /
• 2005

The robots that will be needed in the near future are human-friendly robots that are able to coexist with humans and support humans effectively. To realize this, robot need to recognize his position and direction for intelligent performance in an unknown environment. And the mobile robots may navigate by means of a number of monitoring systems such as the sonar-sensing system or the visual-sensing system. Notice that in the conventional fusion schemes, the measurement is dependent on the current data sets only. Therefore, more of sensors are required to measure a certain physical parameter or to improve the accuracy of the measurement. However, in this research, instead of adding more sensors to the system, the temporal sequence of the data sets are stored and utilized for the accurate measurement. As a general approach of sensor fusion, a UT -Based Sensor Fusion(UTSF) scheme using Unscented Transformation(UT) is proposed for either joint or disjoint data structure and applied to the landmark identification for mobile robot navigation. Theoretical basis is illustrated by examples and the effectiveness is proved through the simulations and experiments. The newly proposed, UT-Based UTSF scheme is applied to the navigation of a mobile robot in an unstructured environment as well as structured environment, and its performance is verified by the computer simulation and the experiment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8B
• /
• pp.1122-1128
• /
• 2010

In this paper, we proposed and designed a novel SNA protocol which operates in the way of a server and a client in the power control system. The proposed SNA protocol includes the information about the mode switching, the saving position of context information, the user trigger, and so forth, which are needed in the power management devices. We consider the application of the SNA protocol to the home network, where message flows between the SNA server and the SNA client. To verify the operation of the SNA protocol, the state transition diagrams of the server in the home gateway and the client in the network device are shown. Hence, we can conclude the SNA can operate without malfuction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.2
• /
• pp.231-239
• /
• 1998

In this paper, we designed a current controlling servo system for speed control of a PMSM. In existing auto-tuning methods for PI controller parameters, the output response is delayed and the overshoot is generated. By solving these existing problems in this paper, a new PI auto-tuning method is applied to the speed controller for fast-response and reduced overshoot. PMSM servo systems offer a great advantage in unmanned factories where a great number of servo motors are employed, because of its easy maintenance characteristics and controllability. The implemented servo system is composed of absolute position detecting circuits of a rotor, a new auto-tuning PI control algorithm, a speed controller by using DSP, and power driving section. The proposed servo system is verified for it's practical availability by considering experimental results.

• Journal of Navigation and Port Research
• /
• v.41 no.5
• /
• pp.287-296
• /
• 2017

The Formal Safety Assessment (FSA) is a structured and systematic methodology developed by the IMO, aimed at assessing the risk of vessels and recommending the method to control intolerable risks, thereby enhancing maritime safety, including protection of life, health, the marine environment and property, by using risk analysis and cost-benefit assessment. While the FSA has mostly been applied to merchant vessels, it has rarely been applied to a DP vessel, which is one of the special purpose vessels in the offshore industry. Furthermore, most of the FSA has been conducted so far by using the Fault Tree Analysis tool, even though there are many other risk analysis tools. This study carried out the FSA for safe operation of DP vessels by using the Bayesian network, under which conditional probability was examined. This study determined the frequency and severity of DP LOP incidents reported to the IMCA from 2001 to 2010, and obtained the Risk Index by applying the Bayesian network. Then, the Risk Control Options (RCOs) were identified through an expert brainstorming and DP vessel simulations. This study recommends duplication of PRS, regardless of the DP class and PRS type and DP system specific training. Finally, this study verified that the Bayesian network and DP simulator can also serve as an effective tool for FSA implementation.

• Journal of Drive and Control
• /
• v.21 no.3
• /
• pp.36-45
• /
• 2024

Collaborative robots, designed for direct interaction with humans have limited adaptability to environmental changes. This study addresses this limitation by implementing a barista robot system using AI technology. To overcome limitations of traditional collaborative robots, a model that applies a real-time object detection algorithm to a 6-degree-of-freedom robot arm to recognize and control the position of random cups is proposed. A coffee ordering application is developed, allowing users to place orders through the app, which the robot arm then automatically prepares. The system is connected to ROS via TCP/IP socket communication, performing various tasks through state transitions and gripper control. Experimental results confirmed that the barista robot could autonomously handle processes of ordering, preparing, and serving coffee.

• Journal of Korea Multimedia Society
• /
• v.16 no.2
• /
• pp.213-225
• /
• 2013

This paper proposes a design method of ball-plate robot controller using single camera and two motors to balance the ball on plate and reduce steady state control error. To design the ball-plate system, it is necessary to observe state of the ball and maintain balance of the plate. The state of the ball is tracked by using the CAMShift algorithm and position error of the ball is compensated by the Kalman filter. Balance of the plate is controlled by driving two motors and we used DC motors which has smaller measurement error. Due to surface condition of the plate or tracking error of ball's position, there are small errors remained. These errors are accumulated and disturb maintaining balance of the ball. To handle the problem, we propose a controller supplemented with an integrator.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.3
• /
• pp.268-274
• /
• 2013

In this paper, the performance analysis of optics-based sensor node localization using ToF (Time of Flight) scheme is conducted. Generally, the position of the sensor node is calculated on the base station. And the base station scans neighboring sensor nodes with a laser. The laser which is reflected from one sensor node, however, can be reached to the base station at different angles according to the scanning resolution. This means that the error of the reached angle can increase and one node may be recognized as different nodes. Also the power of laser can decrease because the laser signal spread. Thus the sensor node which is located at a long distance from the base station cannot be detected. In order to overcome these problems which can be occurred in localization using ToF, the beam spot, the scanning resolution, the size of reflector and the power of laser at the sensor node were analyzed. It can be expected that the consequence of analysis can be provided in acquisition of accurate position of sensor node and construction of optics-based sensor node localization system.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1377-1383
• /
• 2012

This paper proposes a human mouse system that replaces mouse input by human hand movement. As the resolution of monitors increases, it is not quite possible, due to the resolution difference between web cameras and monitors, to place the cursor in the entire range of a monitor by simply moving the pointer which recognizes the position of the hand from the web camera. In this regard, we propose an effective method of placing the position of the mouse, without repeating the returning hand movements, in the corners of the monitor in which the user wants it to be. We also proposes the recognition method of finger movements in terms of using thumb and index finger. The measurement that we conducted shows the successful recognition rate of 97% that corroborates the effectiveness of our method.