• 제목/요약/키워드: ports

검색결과 1,840건 처리시간 0.027초

SNA 분석을 이용한 해상 수출입화물의 네트워크 구조와 국내 항만의 중심성 분석 (An Analysis on the Centrality of Domestic Areas and Ports: Using SNA Methodology)

  • 김주혜;김치열
    • 한국항만경제학회지
    • /
    • 제38권4호
    • /
    • pp.25-43
    • /
    • 2022
  • 과거와 달리 물류를 공간적, 서비스 영역의 확장에 따라 네트워크 관점으로 해석해야하는 노력이 필요하다. 또한 다양한 환경의 변화로 물류 네트워크 역시 급변하고 있다. 따라서 본 연구는 사회네트워크 분석을 이용하여 해상 수출입화물의 구조와 국내 항만의 중심성의 변화 추이를 분석하는데 목적을 두었다. 2005~2020년 기간에 5년 간격의 국내 해상 수출입화물의 전체 교역데이터를 사용하여, 우리나라 해상 수출입화물의 네트워크 구조의 변화를 알아보았으며, 국내 항만의 중심성에 영향을 끼치는 주요 요인을 알 수 있었다. 분석결과로는 연결 중심성은 울산항이 가장 높으며, 내향 근접 중심성은 부산, 인천항, 외향 근접 중심성은 부산, 울산항 순으로 분석되었다. 중개자 역할의 항만이라고 볼 수 있는 매개 중심성이 가장 높은 항만은 부산, 울산항 순으로 나타났다. 본 연구는 항만의 중심성 지표의 변화와 해상화물 네트워크 파악을 토대로 20년간의 국내 수출입화물 교역에 관련한 일련의 패턴을 예측하고 리스크를 대비하는 참고자료로 활용될 수 있을 것이다.

한국형 자율협력주행차량의 도입 방향성에 관한 연구 (A Study on the Direction of the Introduction of Korean Autonomous Co-operation Driving Vehicle)

  • 이승필;김환성
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2020년도 추계학술대회
    • /
    • pp.161-162
    • /
    • 2020
  • 전 세계 주요 선진 항만에서는 AI, 빅데이터, 자율주행자동차, 커넥티드카 등 4차 산업기술과 ICT 기술을 활용하여 항만의 효율성 증가, 항만 내 오염물질 배출 저간 등 환경규제에 대비하고 있다. 그리고 3D 업종 기피 등으로 인한 인력 감소의 문제를 해결하기 위해 완전무인자동화 터미널 개발에 투자하고 있다. 그러나 국내 항만에서는 선진 기술 도입이 늦어지고 있으며 그로 인한 항만 효율성이 떨어지고 있다. 또한 항만 안전사고 문제도 빈번하게 발생하여 항만 마케팅에도 심각한 영향을 미치고 있다. 이에 각 우리나라 컨테이너 터미널 별 특성과 유형을 분석하고 그에 맞는 자율협력주행 도입요인을 5개의 대분류 요인과 15개의 중분류 요인으로 분류하였다. 계층적으로 분류된 도입요인은 선사, 항만공사, 컨테이너 터미널, 관계 부처 등에 근무하는 종사자를 대상으로 설문 조사를 실시할 예정이다.

  • PDF

국내 자동차부두별 생산성 사례 분석 (A Case Study on the Productivity Analysis for Korean Automobile Ports)

  • 한대송;하도연;남형식
    • 한국항만경제학회지
    • /
    • 제39권3호
    • /
    • pp.21-32
    • /
    • 2023
  • 국내 자동차 산업은, 과거부터 현재까지 지속적인 정부 지원 정책과 높은 기술력으로 인하여 성장하고 있다. 자동차 산업이 활발해짐에 따라, 자동차 부두의 역할 또한 중요성이 높아지고 있다. 하지만, 여전히 자동차부두와 관련된 연구는 미비한 실정이다. 이에, 국내 자동차부두의 실증 데이터를 활용하여 국내 자동차부두 생산성 사례분석을 진행하였다. 본 연구는, 내 자동차부두의 생산성 사례분석 결과를 토대로 국내 각 자동차 부두별 생산성을 비교분석하고 시사점 제시하는데 목적을 가진다. 생산성 분석의 경우 설비, 노동, 작업시간, 비용 생산성을 산출하였으며, 기간의 경우 2021년부터 2022년 2분기까지로 생산성 사례 분석을 실시하였다. 생산성 분석을 종합적으로 분석한 결과, 2021년부터 2022년 2분기까지 D부두가 모든 생산성에서 가장 높게 나타났으며, 그 다음으로는 B부두,C부두,A부두로 나타났다. 본 연구는 국내 자동차부두의 실제 기항 데이터를 활용한 생산성 분석으로, 각 자동차부두의 현재 상황을 파악하고 발전방향을 도출하였다는 점에서 유의미하다고 판단된다. 따라서, 본 연구 결과를 바탕으로 각 부두가 발전방향을 모색하고 보다 구체적인 전략을 수립에 기차 자료로 활용될 수 있을 것이다.

기항 매력도를 고려한 세계 컨테이너 항만의 성과 평가 (Evaluating Global Container Ports' Performance Considering the Port Calls' Attractiveness)

  • 박병인
    • 한국항만경제학회지
    • /
    • 제38권3호
    • /
    • pp.105-131
    • /
    • 2022
  • 2019년 개선 이후에도 글로벌 컨테이너 항만시장의 성과를 평가하는 UNCTAD의 정기선해운연계지수(LSCI)는 사용이 제한적이다. 특히 정기선해운연계지수는 관계의 거리만을 기준으로 성과를 평가하기 때문에 기항 매력을 결합한 성과지수가 더 효율적일 것이다. 본 연구에서는 일본 Ocean-Commerce사의 2007, 2017, 2019년 데이터에 수정된 Huff 모델, 소셜 네트워크 분석의 허브-권한 알고리즘 및 고유벡터 중심성, 그리고 상관관계 분석을 사용하였다. 연구 결과는 다음과 같다: 첫째, 기항 매력도와 항만의 전반적 성과가 항상 일치하지는 않았다. 기항 매력도 분석에 따르면 부산은 10위권 안에 머물렀다. 더불어 우리나라의 다른 항만에 대한 기항 매력도도 분석 기간 중 낮은 수준에서 서서히 개선됐다. 둘째, 글로벌 컨테이너항은 일반적으로 항로별로 반입항과 반출항 역할로 장기 특화되어 있으며, 전 기간에 걸쳐 전문성을 유지하면서 성장하고 있다. 그러나 우리나라의 항만은 분석 시기마다 역할이 계속 바꿨다. 마지막으로 본 연구에서 제시한 기간별 항만물동량과 확장항만연계지수(Extended Port Connectivity Index, EPCI)는 0.77에서 0.85사이의 상관관계를 보였다. 비록 대서양 자료가 EPCI 분석에 제외되고 항만물동량 대신 선박의 처리능력을 사용하였지만 둘은 높은 상관관계를 보였다. 이러한 결과는 글로벌 항만을 평가하고 분석하는 데 도움이 될 것이다. 연구에 따르면 한국의 항만은 전문성을 유지하면서 성과를 향상하기 위한 장기 전략이 필요하다. 특히 항만의 바람직한 역할을 유지·발전시키기 위해서는 보완항과의 협력과 파트너십을 활용하고 보완항에 기항하는 선사들의 서비스를 유치하는 것이 바람직하다. 본 연구가 장기간에 걸친 많은 데이터와 방법론을 사용한 복잡한 분석을 수행하였지만, 전세계 항만 대상의 연구, 장기적 패널 분석, 기항 매력도 분석에 대한 과학적 매개변수 추정이 수행되면 연구의 완성도가 더욱 높여질 것이다.

Artificial neural network controller for automatic ship berthing using head-up coordinate system

  • Im, Nam-Kyun;Nguyen, Van-Suong
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제10권3호
    • /
    • pp.235-249
    • /
    • 2018
  • The Artificial Neural Network (ANN) model has been known as one of the most effective theories for automatic ship berthing, as it has learning ability and mimics the actions of the human brain when performing the stages of ship berthing. However, existing ANN controllers can only bring a ship into a berth in a certain port, where the inputs of the ANN are the same as those of the teaching data. This means that those ANN controllers must be retrained when the ship arrives to a new port, which is time-consuming and costly. In this research, by using the head-up coordinate system, which includes the relative bearing and distance from the ship to the berth, a novel ANN controller is proposed to automatically control the ship into the berth in different ports without retraining the ANN structure. Numerical simulations were performed to verify the effectiveness of the proposed controller. First, teaching data were created in the original port to train the neural network; then, the controller was tested for automatic berthing in other ports, where the initial conditions of the inputs in the head-up coordinate system were similar to those of the teaching data in the original port. The results showed that the proposed controller has good performance for ship berthing in ports.

국내항만의 행정서비스 경쟁력측정:DEA접근 (A Measurement of Competition Power of Administration Service in Korean Seaports: DEA Approach)

  • 박노경
    • 한국항만경제학회지
    • /
    • 제20권2호
    • /
    • pp.35-52
    • /
    • 2004
  • The purpose of this paper is to measure the competition power of administration service in Korean Seaports by using the scores of customer satisfaction for administration service investigated yearly from 2000 to 2003 by Ministry of Maritime Affairs & Fisheries. And also, this paper shows the competition power of Korean seaports in terms of efficiency by using DEA(data envelopment analysis) method after measuring the change of productive efficiency scores subject to including and excluding the scores of customer satisfaction for administration service as output variable. The empirical main results of this paper are as follows: First, the efficiency scores of the Ports of Donghae, Gunsan, Jeju, Yeosu, Masan, and Pohang have worsened if the customer satisfaction score is excluded as output variable. Therefore these ports have been influenced by the score of customer satisfaction more positively. Second, the changes of the ranking order by measuring the average efficiency scores of each ports subject to including and excluding the scores of customer satisfaction for administration service as output variable are as follows: Busan(9-->7), Incheon(6-->6), Yeosu(1-->4), Gwangyang(4-->3), Masan (10-->9), Ulsan(5-->5), Donghae(8-->11), Gusan(12-->12), Mogpo(3-->2), Pohang(11-->10), Jeju(7-->8), Daesan(2-->1).

  • PDF

횡류식 대배기구 방식을 적용한 도로터널에서 화재시 최적배연풍량 선정에 관한 연구 (A Study of Smoke Exhaust Rate for the Transverse Ventilation with Oversized Exhaust Ports in Road Tunnel)

  • 유지오;윤성욱;이동호
    • 한국안전학회지
    • /
    • 제21권4호
    • /
    • pp.7-12
    • /
    • 2006
  • Recently, the application of transverse ventilation system with oversized exhaust ports has been increased in bidirectional road tunnel in order to improve smoke exhaust ability. Therefore, in this study, for decision of the optimal smoke exhaust rates in the transverse ventilation system, several standards of nations are compared and numerical simulations with variations of exhaust flow rates are carried out in terms of smoke spread distance by FDS ver. 3.1. As results, in the case of no internal longitudinal air velocity in tunnel, the smoke exhaust rate of $80m^{3}/s$ (the smoke generation rate at HRR of 20MW) is sufficient enough to limit the smoke spread within 250m in 6 minutes after the fire. However, in the case of the internal longitudinal air velocity at 2.5m/s, the smoke exhaust rate should be increased $130m^{3}/s$.

항만 소유구조에 따른 효율성 모형 비교연구 (A Comparative Study of the Relationship between Port Effeciency and Ownership Structure)

  • 황진수;전홍석;강성
    • 응용통계연구
    • /
    • 제22권6호
    • /
    • pp.1167-1176
    • /
    • 2009
  • 항만이나 공항의 소유구조에 대한 효율성 분석은 지금까지 서로 엇갈리는 결과를 제시하고 있다. 즉, 민영화 또는 공영화로 인한 효율성 효과가 자료 또는 분석 방법에 따라서 일치된 결과를 보여주지 않고 있다. 본 논문은 국내의 항만이 포함된 국제 항만 교역데이터베이스를 기반으로 베이지안 확률적 프런티어 모형을 적용하여 항만의 소유 구조에 따른 효율성 분석을 하였다. 소유 구조는 Tongzon과 Heng (2005)의 방법을 따랐으며 제안된 몇 가지 모형과 그들의 모형을 DIC 통계량을 이용하여 비교하였다. 베이지안 추론에 필요한 MCMC 방법은 Griffin과 Steel (2007)에서 소개된 WinBUGS 프로그램을 이용하여 구현하였다.

군장항 일반화물 O/D에 관한 연구;대중국 항만을 중심으로 (A Study on the Origin/Destiantion of General Cargoes of GunJang Port Data;Focused on China's Ports)

  • 조수원;장우준;김태원;곽규석;남기찬
    • 한국항만경제학회:학술대회논문집
    • /
    • 한국항만경제학회 2007년도 정책세미나 및 국제학술대회
    • /
    • pp.493-514
    • /
    • 2007
  • A Port is, one of the important infrastructures, the terminal to connect between land and sea and exerts influences on the development of nation and local area. Accordingly government and privates are making an investment in port facilities in order to raise its competitive power. Due to the economic growth of China and the geographic advantage that Gunsan and Janghang port are close to China, recently traffic with China is rapidly increasing and the role of Gunsan & Janghang ports as a gateway port of west costbecame more important. There, however, remains that Gunsan and Janhang port still don't equipped with enough facilities and strategies to handle increasing traffic. The purpose of this paper is to analyze O/D data of Gunsan-Janghang Port and present the result of O/D as preliminary data. O/D data of Gunsan and Janghang had been analyzed by kinds of cargoes and from/to China's ports and this paper suggests to the competitive strategies of Gunsan and Janghang port to attract cargoes from/to China particularly.

  • PDF

유공성 수평격판을 가진 열원이 있는 밀폐공간내의 온도분포 특성 (Characteristices of Temperature Distribution in a Closed Space with Heat Source and Porous Horizontal Partition)

  • 박찬수;조대환;전철균
    • 한국해양공학회지
    • /
    • 제13권3B호
    • /
    • pp.29-37
    • /
    • 1999
  • Ventilation of the marine engine room is very important for the health of the workers as well as the normal operation of machines. To find proper ventilation conditions of this engine room, numerical simulation with standard k-${\epsilon}$ model was carried out. In the present study, the marine engine room is separated to two floors with porus horizontal partition and considered as a closed space with a heat source and forced ventilation ducts. The porosity of horizontal partition is found to be important. For the engine room with 2 supply ports & 2 exhaust ports, the increasing of the porosity of horizontal partition is effective to reduce the recirculation flow zone in the second floor. When the engine room is ventilated with three supply air ports & one exhaust port, the increasing of the porosity of horizontal partition is effective to reduce the recirculating flow zone in the exhaust air area, but there is a possibility of local extreme heating at the lower side of engine near bottom.

  • PDF