• Membrane and Water Treatment
• /
• 제5권2호
• /
• pp.147-170
• /
• 2014

This paper focuses on the study of the most recent ultra-filtration techniques, based on porous polymer membranes, used for the treatment of wastewater from oil, mine and hydrometallurgical industries. The performance of porous membranes used in separation and recovery of oil and heavy metals from wastewater, was evaluated by the polymer composition and by the membrane characteristics, as it follows: hydrophobicity or hydrophilicity, porosity, carrier (composition and concentration), selectivity, fouling, durability, separation efficiency and operating conditions. The oil/water efficient separation was observed on ultra-filtration (UF) techniques, with porous membranes, whereas heavy metals recovery from wastewater was observed using porous membranes with carrier. It can be concluded, that in the ultra-filtration wastewater treatments, a hybrid system, with porous polymer membranes with or without carrier, can be used for these two applications: oil/water separation and heavy metals recovery.

• 공업화학
• /
• 제16권2호
• /
• pp.200-205
• /
• 2005

우리는 이전의 연구에서 석탄회를 이용하여 높은 미생물 담지능과 양이온에 대한 흡착능을 가지는 다공성 담체를 제조하였다. 본 연구는 다공성 석탄회 담체를 사용한 폐수 처리 생물막 공정 개발을 목적으로 실험실 규모의 연속류식 고정층 생물막 공정에 의한 돈사 폐수 처리 특성을 상용 미생물 담체 및 기존의 활성슬러지법과 동일 조건에서 비교 고찰하여 보았다. 실험 결과로서 제조한 석탄회 담체는 COD, TN, $NH_4{^+}-N$ 항목의 평균 제거율이 각각 80%, 77%, 65%로서 상용 담체 및 기존의 활성 슬러지 공정과 비교하여 높은 제거율을 나타내었다. 처리 후 미생물 담지량을 측정해 본 결과 상용 담체에 비해 높은 값을 나타내었으며, SEM 관찰 결과 석탄회 담체에 미생물 군집이 안정하게 형성되었음을 확인할 수 있었다.

• 한국식품영양과학회지
• /
• 제26권3호
• /
• pp.534-539
• /
• 1997

In order to reuse enzyme efficiently, a mthod for ionic binding of fructosyltransferase to a porous carrier bearing quaternary alkyl alkanolammonium groups was investigated. The fructosyltransferase activity of the immobilized enzyme increased with increasing amount of loaded enzyme, and maximally reached 770U/g of the carrier when loaded amount of the enzyme was 18.2 mg/g carrier. The immobilized fructosyltransferase had optimum pH and temperature of 7.5 and 45$^{\circ}C$, respectively, whereas soluble enzyme had 6.5 and 55$^{\circ}C$: the Km value for the immobilized enzyme was 27.8 mM for sucrose, which was the same as that of soluble enzyme. In a batch reactor, the enzyme produced a mixture of fructooligosaccharides, mainly F$_2$G, from sucrose with the slight loss of enzyme activity during continuous operation of 12 days at 42$^{\circ}C$.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.126.1-126
• /
• 2003

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.438-439
• /
• 2006

Pure and stable YAG $(Y_3Al_5O_{12})$ powders were synthesized by a PVA (polyvinyl alcohol) polymer solution technique. PVA was used as an organic carrier for the precursor ceramic gel. The precursor gels were crystallized to YAG at relatively a low temperature of $900\;^{\circ}C$. The synthesized powders, which have nano-sized primary particles, were soft and porous, and the porous powders were ground to sub-micron size by a simple ball milling process. The ball-milled powders were densified to 94% relative density at $1500\;^{\circ}C$ for 1h. In this study, the characteristics of the synthesized YAG powders were examined.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.249-252
• /
• 2009

Nanocrystalline ceria particles were prepared by using the ultrasonic spray pyrolysis method. The prepared ceria particles were found to be spherical and non-agglomerated by the SEM and TEM analyses. It was found that carrier gas influences the size and morphology. It was found that the air stream of carrier gas results in porous agglomerated structure of ceria abrasives, whereas solid nano-sphere can be obtained in a more oxidizing atmosphere.

• 한국화재소방학회논문지
• /
• 제11권3호
• /
• pp.15-23
• /
• 1997

In this study, the alumina for gas sensor was prepared by anodic oxidation. It was stable thermally and chemically, and pore diameter and pore distribution was uniform. And the shape of pore was cylinderical. The aluminum plate was carried out by the thermal oxidation, chemical polishing and electropolishing pretreatment. The pore diameter, pore size distribution, pore density and thickness of alumina was observed with the change of reaction temperature, electrolyte concentration and current density. As a results, It was able to use for carrier because alumina which was prepared by anodic oxidationhas uniform pore size distribution.

• KSBB Journal
• /
• 제28권4호
• /
• pp.225-229
• /
• 2013

Bovine Carbonic anhydrase (BCA) was immobilized on a submicro-porous membrane through covalent immobilization. The immobilization was conducted on the porous membrane surface with the treatment of polyethyleneimine, glutaraldehyde, and the anhydrase, in sequence. The immobilization was confirmed using X-ray photon spectrometer. The pH values of carbon-dioxide saturated solution with buffer were monitored with respect to time to calculate the catalytic activities of hydration of carbon-dioxide for free and immobilized CA. The catalytic rate constant values for free CA, immobilized CA on polystyrene nanoparticles, and immobilized CA on a porous cellulose acetate membrane were 0.79, 0.67, and 0.56 $s^{-1}$, respectively. Reusability was studied up to 10 cycles of $CO_2$ sequestration. The activity for the CA immobilized on the membrane was kept to 95% after 10 cycles, and comparable to the CA on the nanoparticles. The stabilities for heat and storage were also investigated for the three cases. The results suggested that the CA immobilized the membrane had the least loss rate of the activity compared to the others. From this study, the porous membrane was feasible as a carrier for the CA immobilization in hydration and sequestration of carbon-dioxide.

• 한국재료학회지
• /
• 제25권2호
• /
• pp.68-74
• /
• 2015

The porous $Mg_3Sb_2$ based compounds with 60~70% of relative density were prepared by powder compaction at room temperature and reactive liquid phase sintering at 1023 K for 4hrs. The stoichiometric $Mg_3Sb_2$ compounds were synthesized from elemental Sb and Mg powder in the mixing range of 61~63 at% Mg. The increased scattering effect due to the micro-pores reduced the mobility of the charge carrier and the phonon, which caused the electrical conductivity and the thermal conductivity to decrease, respectively. But the scattering effect was greater for the electrical conductivity than for the thermal conductivity. Excess Mg alloyed in the $Mg_3Sb_2$ compounds decreased the electrical conductivity, but had no effect on the thermal conductivity. On the other hand, the large increase of the Seebeck coefficient was the result of a decrease in the charge carrier density due to the excess Mg. Dimensionless figure of merit of the porous $Mg_3Sb_2$ compound reached a maximum value of 0.28 at 61 at% Mg. The obtained value was similar to that of $Mg_3Sb_2$ compounds having little pores.

• Journal of Pharmaceutical Investigation
• /
• 제41권4호
• /
• pp.217-225
• /
• 2011

The aim of this work was to prepare porous osmotic pump tablets for controlled delivery of Aceclofenac. Aceclofenac solid dispersion was prepared to improve the solubility by using the drug - carrier (Mannitol) ratio of 1:1. The osmotic pump tablets were prepared using the solid dispersed product of Aceclofenac. The formulation contains potassium chloride as osmotic agent, cellulose acetate as semipermeable membrane, poly ethylene glycol (PEG 4000) as pore former and sodium lauryl sulphate (SLS) as solubility enhancer. The formulations were designed by the general factors such as osmotic agent and pore former. All formulations were evaluated for various physical parameters and, the in vitro release studies were conducted as per USP. The drug release kinetic studies such as zero order, first order, and Higuchi and Korsmeyer peppas were determined and compared. All the formulations gave more controlled release compared to the marketed tablet studied. Numerical optimization techniques were applied to found out the best formulation by considering the parameter of in vitro drug release kinetics and dissolution profile standards. It was concluded that the porous osmotic pump tablets (F7) composed of Aceclofenac solid dispersion/Potassium chloride/Lactose/Sodium lauryl sulphate/Magnesium Stearate (400/40/95/10/5, mg/tab) and coating composition with Cellulose acetate/ PEG 4000 (60/40 %w/w) is the most satisfactory formulation. The porous osmotic pump tablets provide prolonged, controlled, and gastrointestinal environment-independent drug release.