It is impossible to know the amount of pork primal cut by pig carcass grade which is determined only by carcass weight and backfat thickness in the Korean Pig Carcass System. The aim of this study was to investigate the correlation between the pig carcass grade and the amount of pork primal cut estimated with AutoFom III. A total of 419,321 Landrace, Yorkshire, and Duroc (LYD) pigs were graded with the Korean Pig Carcass Grade System. Amounts of belly, neck, loin, tenderloin, spare ribs, shoulder, and ham were estimated with AutoFom III. Regression equations for seven primal cuts according to each grade were derived. There were significant differences among the three carcass grades due to heteroscedasticity variance (p < 0.0001). Three regression equations were derived from AutoFom III estimation of primal cuts according to carcass grades. The coefficient of determination of the regression equation was 0.941 for grade 1+, 0.982 for grade 1, and 0.993 for grade 2. Regression equations obtained from this study are suitable for AutoFom III software, a useful tool for the analysis of each pig carcass grade in the Korean Pig Carcass Grade System. The high reliability of predicting the amount of primal cut with AutoFom III is advantageous for the management of slaughterhouses to optimize their product sorting in Korea.
Piao, J.R.;Tian, J.Z.;Kim, B.G.;Choi, Y.I.;Kim, Y.Y.;Han, In K.
Asian-Australasian Journal of Animal Sciences
/
v.17
no.10
/
pp.1452-1458
/
2004
An experiment was conducted to examine the effects of sex and market weight on performance, carcass characteristics and pork quality. A total of 224 crossbred pigs (initially 26.64 kg BW) were allotted in a $2{\times}4$ factorial arrangement in a randomized complete block (RCB) design. The variables were sex (gilts and barrows) and different market weights (100, 110, 120 and 130 kg). Average daily gain (ADG) and average daily feed intake (ADFI) were significantly higher (p<0.01) in barrows than gilts, ADFI and feed conversion ratio (FCR) increased as body weight increased (p<0.05). Gender differences were observed in carcass characteristics. Backfat thickness and drip loss were greater in barrows (p<0.01), while loin eye area (p<0.01), flavor score (p<0.05) and lean content (p<0.001) were higher in gilts. Carcass grade and water holding capacity were the highest in 110 kg market weight pigs. The 100 kg arket weight pigs showed lower juiciness, tenderness, shear forces and total palatability than the other market weights (p<0.01). Hunter values (L*, a* and b*) were increased as market weight increased (p<0.05). Hunter a* value was greater in gilts (p<0.01) but L* value and b* value were not affected by sex of pigs. Net profit [(carcass weight${\times}$price by carcass grade)-(total feed cost+cost of purchased pig)] was higher in gilts than barrows (p<0.01), and was higher (p<0.05) in the pigs marketed at 110 and 120 kg market weight compared with 100 kg market weight. These results demonstrated that gilts showed higher carcass characteristics, pork quality, feed cost per kg body weight gain and net profit compared with barrows. Moreover, 110 or 120 kg body weight would be the recommended market weight based on pork quality and net profit for swine producers.
The study was conducted to evaluate the effect of chromium nanoparticle (CrNano) on growth, carcass characteristics, pork quality, and tissue chromium in finishing pigs. A total of 100 Duroc$\times$Landrace$\times$Yorkshire barrows (average initial BW of 64.78$\pm$0.83 kg) were divided into 10 pens, 10 pigs per pen. 5 pens of pigs were fed with control diet (corn-soybean meal, 1.05% Lys) and others were fed with control diet addition with 200 $\mu$g/kg Chrome (Cr) from CrNano. During the trial, all pigs were given free access to feed and water. After 35 days trial, 10 pigs from each each treatment (weight similar to average group weight, 91.34$\pm$1.31 kg for control group, and 92.26$\times$0.56 kg for CrNano treated group) were sacrificed to measure carcass characteristics, pork quality, and to collect the samples of longissimus muscle, liver, kidney and heart. The results indicated that the addition of 200 $\mu$g/kg CrNano decreased feed: gain ratio by 3.56% (p<0.05) compared to the control group. Pigs fed CrNano had 14.06% higher (p<0.05) carcass lean percentage, 19.96% (p<0.05) larger longissimus muscle area and 25.53% lower (p<0.05) carcass fat percentage, 18.22% lower (p<0.05) backfat thickness. Drip loss in chops from pigs fed CrNano was decreased by 21.48% (p<0.05) and weights of longissimus muscle and semimembranosus were increased by 16.33% (p<0.05) and 14.87% (p<0.05) respectively. In addition, supplemental CrNano resulted in 184.11% (p<0.05), 144.99% (p<0.05), 88.13% (p<0.05) and 52.60% (p<0.05) increment of Cr concentration in longissimus muscle, liver, kidney and heart, respectively. These results suggest that supplemental CrNano has beneficial effects on carcass characteristics, pork quality and individual skeletal muscle weight, increase tissue chromium concentration in selected muscle and organs.
Addition effect of mugwort powder on storage stability of boiled carcass grade(B and E) during storage at $4\pm1^{\circ}C$for 8 weeks were investigated. The pH value and volatile basic nitrogen(VBN) content of boiled pork with mugwort powder were not significant difference(p>0.05) depending on the carcass grade as compared to boiled pork without mugwort powder. The thiobarbituric acid reactive substances(TBARS) values of boiled pork with mugwort powder were significantly lower than those of boiled pork without mugwort powder up to 8 weeks of the chilling process. The boiled pork with mugwort powder showed to have lower numbers of bacteria and residual nitrite than those without mugwort powder depending on the carcass grade.
The purpose of the current study was to examine the influence of different maternal nutrition treatments during pregnancy on body weight, muscle fiber number, carcass traits, and pork quality traits of offspring. A total of 18 crossbred sows (Landrace${\times}$Yorkshire${\times}$Duroc) were randomly assigned to one of three nutritional treatment groups; control, high energy, and high protein. The control group was fed a standard diet, the high energy group was fed a diet that contained 30% increased metabolizable energy, and the high protein group was fed a diet that contained 30% increased limiting amino acids compared to the control. The sows in each group were fed equal quantities of each diet (1.9 kg/d) for the entire gestational period. A total of 36 piglets from each sow were used to evaluate changes in body weight, muscle fiber number in the longissimus dorsi muscle at birth, carcass traits, and pork quality traits. Birth weight of offspring born to sows in the high energy diet group was significantly higher compared to the high protein diet group (p<0.05). However, body weight of offspring after birth was not significantly different between the groups. Muscle fiber number for the longissimus dorsi muscle at birth was not significantly different between the groups. In addition, there were no significant differences in carcass traits or pork quality traits between offspring born to sows in the control group and those born to sows that received high energy or high protein diets during pregnancy. Based on these results, it appears that maternal nutrition treatment during pregnancy, regardless of whether it is with high energy or high protein diets, does not have a significant effect on body weight, muscle fiber number at birth, carcass traits, or pork quality traits.
Major hazards existed in slaughterhouse are pathogenic microorganisms originated from intestinal microflora of slaughtered animals. This study was intended for the identification of microbial contamination sources during pork slaughtering in small plants. Total aerobic bacteria, Coliform group, Salmonella spp, Listeria monocytogenes, and Campylobacter jejuni/coli were isolated from the surface sample of pork carcasses. Contamination level among different sampling points of ham, belly and neck did not showed statistical differences. Therefore, the mixed sampling from belly and neck of carcass could be effective for microbiological monitoring. Isolation rates of pathogenic microorganisms showed Salmonella spp 20.9%, Listeria monocytogenes 10.5%, and Campylobacter jejuni/coli 8.1% from 296 sampling points. High prevalence rate of Salmonella spp indicated that the contamination of intestinal microflora occurred due to unsanitary processing control, which required HACCP system in small plants. It was recommended that the prerequisite program should be a key factor for a successful HACCP system implementation especially in small size slaughterhouse.
Objective: The present work aimed at evaluating the effects of carcass quality grade (QG) on the quality characteristics of pork meat according to Korean carcass QG system. Methods: Pork carcasses with varying in QG: 1+ (QG1+, n = 10), 1 (QG1, n = 10) and 2 (QG2, n = 10), were used to evaluate the relationship between carcass QG and meat quality. The meat quality traits, fatty acid profiles, flavor compounds and sensory qualities were measured on the longissimus dorsi muscle samples of these carcasses. Results: Pork meat of higher QG (QG1+) presented significantly higher fat content (5.43%), C18:2n-6 level (19.03%) and total unsaturated fatty acids content (62.72%). Also, the QG1+ meat was significantly higher in levels of classes of flavor compounds such as aldehydes, alcohols and hydrocarbons in comparison to those of the meat samples from the lower QG groups. The sensory evaluation results (flavor, juiciness, tenderness, and acceptability scores) of QG1+ meat was significantly higher than the QG1 and QG2 meats. The pork with lower QG (i.e., QG2) was found positively correlated to redness (r = 0.987), C18:1n-9 level (r = 1.000) but negatively correlated to the fat content (r = -0.949), and flavor (r = -0.870), juiciness (r = -0.861), tenderness (r = -0.862) and acceptability (r = -0.815) scores. Conclusion: The pork with higher QG had higher fat content, total unsaturated fatty acids and better eating quality, thus producing pork with higher QGs should be considered in order to satisfy the consumer's expectation.
Hayeon Jeon;Seul-Ki-Chan Jeong;Seonmin Lee;Dongjun Kim;Hyeun Bum Kim;In-Seon Bae;Yunseok Kim;Pil Nam Seong;Samooel Jung;Kyung Jo
Korean Journal of Agricultural Science
/
v.51
no.3
/
pp.307-314
/
2024
This study investigated the relationship of electrical conductivity and color to water loss and shear force of pork loin. In addition, the differences in quality properties with the sex and carcass grades were investigated. There were no differences in drip loss, cooking loss, and total loss of pork loin between barrow and gilt (p > 0.05). The shear force of pork loin was lower in barrow than in gilt (p < 0.05). The quality properties of pork loin did not differ among the carcass grades (1+, 1, and 2). The electrical conductivity measured at 45 min, 3 h, and 12 h had no noticeable correlation coefficients with the quality properties of pork loin. The L*, a*, and b* values correlated significantly with cooking loss and total loss. The highest correlation coefficient was 0.45 between L* and total loss. From the results, we conclude that the electrical conductivity and color values are not suitable variables for predicting pork loin quality. Therefore, further study to develop ways for predicting the pork quality during the grading of pork carcasses is required.
As pork consumption increases, rapid and accurate determination of porcine carcass grades at abattoirs has become important. Non-destructive, automated inspection methods have improved slaughter efficiency in abattoirs. Furthermore, the development of a calibration equation suitable for non-destructive inspection of domestic pig breeds may lead to rapid determination of pig carcass and more objective pork grading judgement. In order to increase the efficiency of pig slaughter, the correct estimation of the automated-method that can accommodate the existing pig carcass judgement should be made. In this study, the previously developed calibration equation was verified to confirm whether the estimated traits accord with the actual measured traits of pig carcass. A total of 1,069,019 pigs, to which the developed calibration equation, was applied were used in the study and the optimal estimated regression equation for actual measured two traits (backfat thickness and hot carcass weight) was proposed using the estimated traits. The accuracy of backfat thickness and hot carcass weight traits in the estimated regression models through stepwise regression analysis was 0.840 (R2) and 0.980 (R2), respectively. By comparing the actually measured traits with the estimated traits, we proposed optimal estimated regression equation for the two measured traits, which we expect will be a cornerstone for the Korean porcine carcass grading system.
The objective of this study was to investigate the influence of increasing carcass weight (CW) on meat quality traits including meat color, water-holding capacity (WHC), tenderness, backfat thickness and intramuscular fat (IMF) content of pork loin. A total of 96 pork carcasses (48 LYD [Landrace × Yorkshire × Duroc] barrows and gilts) were selected at a commercial slaughterhouse. Each gender had commercial CW (≤ 90 kg), heavy CW (91-100 kg) and very heavy CW (> 100 kg) (16 carcasses from each CW group). Loin cuts (Longissimus lumborum) were excised to investigate meat color (CIE L*a*b*), drip loss, cooking loss, released water, Warner-Bratzler shear force (WBSF), and IMF content. Backfat thickness and IMF content of pork loin samples were significantly (p < 0.05) increased with increasing CW, although there was no significant difference in ultimate pH (pHu). CIE a* increased significantly (p < 0.05) with increasing CW, while there were no significant differences in CIE L* or CIE b* among CW groups. Although all WHC measures showed no significant differences among CW groups, WBSF increased significantly (p < 0.01) with increasing CW. Sensory flavor score was significantly increased while panel score for tenderness was decreased significantly (p < 0.001) with increasing CW. Consequently, CW had a positive correlation with flavor but negative correlation with tenderness. These results indicate that the increased IMF content improves flavor, juiciness and palatability, although tenderness deteriorates with increasing CW.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.