• 펄프종이기술
• /
• 제33권1호
• /
• pp.53-61
• /
• 2001

This study was carried out to evaluate the effect of coating pigments on the printability by investigating the pore structure of casting layer such as the number, size and distribution of pores and the pore rate. The coating structure was mainly determined by the interaction between pigment and binder. It means that the structure of pores was chiefly affected by the shape and size distribution of pigments and their packing rate. The physical properties of pore have close relationships with ink set-off, the speed of ink penetration and printing gloss. The results suggested that the rate and number of pores were greatly affected by the particle size distribution and shape of pigments. The rate of pore increased with the reduction of particle size distribution of pigments. Calcite was effective to improve greatly the printability of coated paper.

• 천문학회보
• /
• 제38권1호
• /
• pp.66.2-66.2
• /
• 2013

In this study, we present a pore-selection technique to estimate the size of pore. The estimation of the size of pore is important to examine the temporal evolution of size itself and corresponding intensity. The size of pore is typically estimated by applying the intensity threshold technique to the fixed box which contains the entire pore. The typical method has disadvantages in the following circumstances; there are small features near the pore or the image has low spatial resolution. In the former, it is difficult to define a box containing the pore only, excluding the small features near the pore. In the latter, the background and threshold intensity are insignificant due to the insufficient number of pixel in the box. To avoid these difficulties, we use a pore-selection technique which is simply based on the measurement of distances from the pore center. In addition, we will discuss the advantage of the technique for the imaging spectrograph data like the NST FISS.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.617-620
• /
• 2011

Thermal shock behavior of porous ceramic nozzles with various pore sizes for continuous casting process of steel was investigated in terms of physical properties and microstucture. Porous nozzle samples with a composition of $Al_2O_3$-$SiO_2$-$ZrO_2$ were fabricatedby adding various sizes of graphite as the pore forming agent. As the graphite size increased from 45~75 to 150~180 ${\mu}m$, both the resulting pore size and the flexural strength also increased. A thermal shock test was carried out at temperatures (${\Delta}$T) of 600, 700, 800, and 900$^{\circ}C$. Microstructure analysis revealed a small number of cracks on the sample with the largest mean pore size of 22.32 ${\mu}m$. In addition, increasing the pore size led to a smaller decrease in both pressure drop and elastic modulus. In conclusion, controlling the pore size can enhance thermal shock behavior.

• 한국지반공학회논문집
• /
• 제38권3호
• /
• pp.27-34
• /
• 2022

지반내 물의 흐름은 입자 사이의 공극 분포에 의존하므로 입자의 크기를 이용한 수리학적 물성치의 예측은 정확도가 낮다. 본 논문은 Silveria의 방법을 이용하여 입도분포곡선으로부터 수축 공극크기분포를 산정하고, 포화-불포화 수리학적 물성치를 산정하는 방법을 제시하였다. 입도분포가 양호한 흙은 단봉의 공극크기분포를 보이고, 입도분포가 불량한 흙은 쌍봉의 공극크기분포를 보였다. 공극크기분포를 이용한 이론적 포화투수계수 모델식 중에서 Marshall 모델이 실내실험결과와 가장 부합되었다. 불포화토 수리해석에 필요한 함수특성곡선과 불포화투수계수에 대한 모델식을 공극크기분포를 이용하여 제안하였다. 개발된 모델식을 다양한 흙에 적용하여 수리학적 물성치의 예측에 적합한 모델을 선정하는 지속적인 연구가 필요하다.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.25-30
• /
• 2019

In this paper, we have analyzed manufacturing problems of the scaffold with pores using FDM 3D printer and PLGA. We suggested the solutions using 3SC practical TRIZ. We selected the final solution used machine learning. We reduced number of experiments using most influential factor after analysis print factors. We printed the scaffold and measured pore size. We created the regression model using python tensorflow. The print condition data of measured pore size was used as training data. We predicted the pore size of printed condition using regression model. We printed the scaffold using the predicted the print condition data. We quantitatively compare the predicted scaffold pore size data and the measured scaffold pore size data. We got satisfactory result.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.265-268
• /
• 2005

A new method for measurement of the pore size in a nanohoneycomb structure using atomic force microscopy (AFM) was proposed. Porous type anodic aluminum oxide (AAO) was fabricated as a nanohoneycomb structure to measure the pore size. For measuring pore sizes from AFM images, a criterion was set in porous type AAO. The pore sizes from AFM images were compared with those from SEM images, and the results showed good agreement. The relationship between the pore size and widening time was found to be linear in the range of this study. It was understood as the synchronized effects of the impurity gradient in outer oxide of AAO, mechanical packing and mass transfer increase.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.388-395
• /
• 2018

Significant efforts have been applied toward fabricating three-dimensional (3D) scaffolds using 3D-bioprinting tissue engineering techniques. Gelatin has been used in 3D-bioprinting to produce designed 3D scaffolds; however, gelatin has a poor printability and is not useful for fabricating desired 3D scaffolds using 3D-bioprinting. In this study, we fabricated pore size controlled 3D gelatin scaffolds with two step 3D-bioprinting approach: a low-temperature ($-10^{\circ}C$) freezing step and a crosslinking process. The scaffold was crosslinked with 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS). The pore sizes of the produced 3D gelatin scaffolds were approximately 30% smaller than the sizes of the designed pore sizes. The surface morphologies and pore sizes of the 3D gelatin scaffolds were confirmed and measured using scanning electron microscopy (SEM). Human dermal fibroblasts (HDFs) were cultured on a 3D gelatin scaffold to evaluate the effect of the 3D gelatin scaffold pore size on the cell proliferation. After 14 days of culture, HDFs proliferation throughout the 3D gelatin scaffolds prepared with more than $580{\mu}m$ pore size was approximately 14% higher than proliferation throughout the 3D gelatin scaffold prepared with a $435{\mu}m$ pore size. These results suggested that control over the 3D gelatin scaffold pore size is important for tissue engineering scaffolds.

• Journal of the Korean Wood Science and Technology
• /
• 제47권1호
• /
• pp.8-20
• /
• 2019

This study was conducted to analyze the pore structure of Yellow poplar. Cross-sectional surfaces of heartwood and sapwood of Yellow poplar (Liriodendron tulipifera) were observed by SEM, and the true density of the heartwood, intermediate wood and sapwood were measured by gas pycnometery, while gas permeability and pore size of heartwood, intermediate wood and sapwood were measured by capillary flow porometery. The pores were classified as through pore, blind pore and closed pore. It was determined that the permeability was increased due to the content and size of through pore being increased although the total porosity of specimen showed slight difference from pith to bark. The content of through pore porosity was 33.754 % of heartwood and 47.810 % of sapwood, showed an increasing trend from pith to bark, however, those for the blind pore porosity and closed pore porosity were 27.890 % and 19.492 % for heartwood and 19.447 % and 4.660 % for sapwood, showed a decreasing trend from pith to bark. The max pore size of specimens was increased by about 5 times from $5.927{\mu}m$ to $31.334{\mu}m$, and mean flow pore size was increased by about 315 times from $0.397{\mu}m$ to $12.437{\mu}m$ from pith to bark.

• 펄프종이기술
• /
• 제33권2호
• /
• pp.41-48
• /
• 2001

This paper was made to evaluate the effect of the type of latex for coating on the printability by investigating the structure of pore such as the pore fraction, the number of pores, pore size and distribution of coated paper. The coated structure is mainly depend on the results of interaction between pigment and binder. It means that the structure of pore formed is chiefly affected by the type of latex. This physical properties of pore have a close relation with ink set-off associated with the drying rate, the speed of penetration of ink into base paper and printing gloss. Therefore it was necessary to find out the relationship between pore structure and the performance of printability by modifying the type of latex to vary the pore structure of coated paper. Acrylic latex was superior to S/B latex in the sedimentation volume, compressibility, smoothness, pore fraction and its number, the weight of transferred ink onto the coated paper and ink repellance. In contrast, water retention and ink setting were not good. in the comparison of anionic and amphoteric latex, amphoteric latex showed better performance in the thickness, smoothness, pore fraction and its number, pore size, the weight of ink transmitted and K&N ink receptivity, etc.

• 한국화재소방학회논문지
• /
• 제11권3호
• /
• pp.15-23
• /
• 1997

In this study, the alumina for gas sensor was prepared by anodic oxidation. It was stable thermally and chemically, and pore diameter and pore distribution was uniform. And the shape of pore was cylinderical. The aluminum plate was carried out by the thermal oxidation, chemical polishing and electropolishing pretreatment. The pore diameter, pore size distribution, pore density and thickness of alumina was observed with the change of reaction temperature, electrolyte concentration and current density. As a results, It was able to use for carrier because alumina which was prepared by anodic oxidationhas uniform pore size distribution.