• 공업화학
• /
• 제19권5호
• /
• pp.484-490
• /
• 2008

폴리비닐피로디온을 서로 다른 끓는점, 유전상수, 쌍극자모멘트를 갖는 다양한 용매(메탄올, 에탄올, 2-프로판올, 부탄올, 아세톤, 메틸렌클로라이드 및 DMF)에 용해시켜 전기방사를 시도하여 섬유의 특성을 연구하였다. 전기 방사된 폴리비닐피로디온은 방사용액의 점도, 전기전도도 및 표면장력에 영향을 받는다. 점도가 $0.114kg/m{\cdot}s$ 이상, 전기전도도는 1.02 mS/m 이상, 표면장력은 30.0 mN/m 이하에서 섬유가 형성되었다. 에탄올 용매계에서 폴리비닐피로디온의 평균직경은 인가전압이 10 kV에서 20 kV 증가시킴에 따라 1710에서 5454 nm까지 증가하였다.

• 멤브레인
• /
• 제17권4호
• /
• pp.329-337
• /
• 2007

본 연구에서는 p-toluenesulfonic acid (TSA)와 polyvinylpyrrolidone (PVP)를 함유한 polyethersulfone (PES) 고분자 용액을 이용하여 PES 멤브레인 내에 최소 공경을 갖는 내부 분리층을 만드는 방법에 관한 새로운 방법을 제시하고자 한다. 팽윤제로 사용된 PVP와 응고제로 사용된 TSA를 함유한 평막형 PES 멤브레인의 제조 및 구조적인 특성 조사가 수행되었으며, 상업용 막에 대등할 만한 투과 성능과 좁은 pore size distribution을 가지는 멤브레인을 제조할 수 있음을 확인하였다. 또한 PVP의 첨가는 멤브레인의 단면구조와 투과 성능에, TSA는 투과 성능보다는 pore size distribution에 영향을 준다는 것을 확인하였으며 이는 FE-SEM 결과와 TSA를 첨가한 멤브레인의 단면 사진에서 내부 최소 기공층의 두께가 두꺼워짐을 확인할 수 있었다.

• 한국재료학회지
• /
• 제22권12호
• /
• pp.696-700
• /
• 2012

(Na, K) $NbO_3$ thick film was successfully achieved using a sol-gel coating process with the addition of polyvinylpyrrolidone (PVP) to a metal alkoxide solution. The transparent coating solution, mixed with Nb:PVP = 1:1 in a molar ration, was synthesized by evaporating the solvent to over 62.5 wt%. Additive PVP increased the viscosity of the solution so that the coating thickness could be enhanced. The thickness of the (Na, K) $NbO_3$ film assisted by PVP was ca. 320 nm at the time of deposition; this value is four times thicker than that of the sample fabricated without PVP. Also, due to PVP binding with the OH groups of the metal alkoxide, the condensation reaction in the film was suppressed. The crystalline size of the (Na, K) $NbO_3$ films assisted by PVP was ca. 15 nm smaller than that of the film fabricated without PVP. After the sintering process at $700^{\circ}C$, the (Na, K) $NbO_3$ films were mainly composed of randomly oriented (Na, K) $NbO_3$ phase of perovskite crystal structure, including a somewhat secondary phase of $K_2Nb_4O_{11}$. However, by adding PVP, the content of the secondary phase became quite smaller than that of the sample without PVP. It was thought that the addition of PVP might have the effect of restraining the loss of potassium and that PVP could hold metalloxane by strong hydrogen bonding before complete decomposition. Therefore, the film thickness of the (Na, K) $NbO_3$ films could be considerably advanced and made more crack-free by the addition of PVP.

• 폴리머
• /
• 제35권1호
• /
• pp.13-16
• /
• 2011

본 연구에서는 생체 적합성이 우수한 합성고분자 폴리비닐피롤리돈(PVP)과 천연고분자 카피-카라기난(${\kappa}C$), 1,2-헥산디올(HD)을 혼합하여 감마선 조사에 의한 방사선 가교로 하이드로젤을 제조하였다. 방사선 조사량은 25 kGy, ${\kappa}C$의 농도는 3 wt%로 고정하였다. 이렇게 제조된 하이드로젤의 의 PVP, HD의 농도에 따른 물리적 특성을 관찰하였다. PVP의 농도가 증가할수록 피롤리돈 분자 사이의 가교반응으로 젤화율과 연장강도는 증가하였고, 팽윤도는 감소하였다. 반면에 HD의 농도가 증가할수록 젤화율과 인장강도는 감소하였으며, 팽윤도는 증가하였다. 항균성 실험을 통해 HD를 함유한 하이드로젤에서 항곰팡이성 활성이 관찰되었다.

• 생명과학회지
• /
• 제8권5호
• /
• pp.520-525
• /
• 1998

한란(Cymbidium kanran)의 급속증식을 위한 식물생장 조절물질과 항산화제의 처리결과, 2.5 g/1 gelrite가 생장과 경제적인 면에서 우수하였는데, 9 g/1 시약한천보다 적은 약 28% 정도의 양과 절반 정도의 가격으로 우수한 결과를 나타났다. 식용한천은 시약한천에 비해 절반 정도의 가격으로 거의 비슷한 생육을 보였다. BA와 NAA의 농도가 높을수록 배지의 갈변도가 심하였으며, 식물생장조절물질의 작용을 억제하였다. polyvinylpyrrolidone (PVP, M.W. 40,000)이 ascorbic acid, aspartic acid, rutin 보다 우수 항산화제인 것으로 나타났다. 식물생장조절물질 처리에서는 0.1-1.0 mg/1 BA와 0.1 mg기 NAA, 1 g/1 PVP 처리구가 가장 좋은 생육을 보였다. 따라서 한란의 경우 급속한 개체 증식을 위해서는 MS 기본배지에 2.5 g기 gelrite를 불활성 지지물로 사용하고, 0.1-1.0 mg/1 BA 수준에 0.1 mg/1 NAA를 처리하고, 1 g/1 PVP 첨가를 통해 배지의 산화를 억제하여 배양기간을 연장하고, 식물생장조절물질의 역할이 정상적으로 작용하도록 하여 적은 양의 식물생장조절물질의 사용으로 강건한 묘를 확보할 수 있는 것으로 나타났다.

• Journal of Pharmaceutical Investigation
• /
• 제30권4호
• /
• pp.235-239
• /
• 2000

Ipriflavone (3-phenyl-7-isopropoxy-4H-1-benzopyran-4-one, IP) is a well-known antiosteoporotic drug with poor bioavailability. In the previous study, we reported that the IP formulation prepared by spray-drying method with polyvinylpyrrolidone (PVP) (SIP) was very effective in improving the bioavailability of IP. In this study, we examined the effects of molecular weight and mixture ratios of PVP to IP on the systemic absorption of IP following oral administration of SIP at a dose of 50 mg/kg to rats. In the effect of molecular weight, the Cmax of spray-dried IP with PVP K30 (SIP-K30) was significantly higher than those of spray-dried IP with PVP 360 (SIP-360), spray-dried IP with PVP K90 (SIP-K90), and spray-dried IP with PVP K17 (SIP-K17) (p<0.05). The AUC of SIP-K30 was about 2, 3, and 5.5 times higher than those of SIP-360, SIP-K90, and SIP-K17, respectively. The AUC value of SIP-K30 was significantly greater than those of SIP-K17 and SIP-K90 (p<0.05) except for SIP-360. In the ratio of PVP K30 to drug, the $C_{max}$ and the AUC value of 3 : 7 IP-PVP solid dispersion were similar to those of 5 : 5 IP-PVP and significantly higher than those of the other solid dispersions (p<0.05). It was concluded that the spray-dried IP with PVP K30 at the ratio of 3:7 (w/w) was the best formulation for improving the bioavailability of IP.

• 한국재료학회지
• /
• 제18권8호
• /
• pp.401-405
• /
• 2008

Pt-loaded carbon black for the catalyst of a PEM fuel cell was synthesized with different molar ratios of polyvinylpyrrolidone and $H_2PtCl_6$ solution to improve the dispersion of Pt nanoparticles on carbon black and decrease the size of Pt nanoparticles. From transmission electron microscopy results, Pt nanoparticles of a size of approximately 2 nm were highly dispersed when the polyvinylpyrrolidone concentration was 10mM. The electrochemical activity of the synthesized Pt/C catalysts was investigated by cyclic voltammetry, showing that the as-synthesized Pt-loaded carbon black catalyst had the best activity at a polyvinylpyrrolidone concentration of 10 mM.

• 설비공학논문집
• /
• 제23권1호
• /
• pp.47-53
• /
• 2011

In this study, the characteristics of multi-walled carbon nanotubes added nanofluid were investigated. Sodium Dodecyl Sulfate, SDS, and Polyvinylpyrrolidone, PVP, were employed as the dispersant. SDS or PVP was added in pure water. And then, 0.0005, 0.001, 0.002, 0.003. 0.004, 0.005,0.01, and 0.02 vol% of CM-95 and CM-100 were dispersed respectively. The thermal conductivity and the viscosity were measured with a transient hot-wire instrument built for this study and the DV II+ Pro viscometer. The results showed that PVP had good thermal conductivity at 300 wt% and the thermal conductivity of CM-100 was better than that of CM-95. However, the viscosity of CM 100 was higher than that of CM 95.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1741-1744
• /
• 2013

A new polymeric catalyst was prepared by supporting $GaCl_3$ on cross-linked polyvinylpyrrolidone ($GaCl_3$/PVP). This catalyst was employed for efficient and regioselective ring-opening reaction of epoxides by various alcohols under solvent-free conditions at room temperature. In our procedure, this heterogeneous catalyst was used at neutral and mild reaction conditions to afford high yields of ${\beta}$-alkoxy alcohols. Also, regioselective conversion of epoxides to ${\beta}$-azidohydrines was accomplished by sodium azide in MeOH in the presence of $GaCl_3$/PVP at room temperature. $GaCl_3$/PVP is a non-hygroscopic and recoverable catalyst and is easily separated from reaction mixture by a simple filtration and re-used repeatedly. Also, this catalyst has good handling and can be stored for long time without any reducing of its reactivity.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2575-2580
• /
• 2010

We present a method for chemically reducing silver alkylcarbamate complex with hydrazine to synthesize silver nanocolloids in an organic solvent using polyvinylpyrrolidone (PVP) as the stabilizer. To determine the optimal conditions for preparing stable silver colloids of controlled size and shape, the silver 2-ethylhexylcarbamate (Ag-EHCB) complex, PVP, hydrazine, and 2-propanol solvent concentrations in the reaction mixture were varied. The initial colloid has a mean particle diameter of 5-80 nm, and it exhibits an absorption band with various shapes in the UV region with a maximum near 420 nm. UV-vis spectroscopy, TEM, and X-ray diffraction techniques were used to investigate the formation and growth process of the metallic silver nanocolloids.