• Elastomers and Composites
• /
• v.50 no.2
• /
• pp.98-102
• /
• 2015

A series of polyurethane-acrylate hybrids were synthesized by 2-step emulsion polymerization of a variety of acrylate monomers such as 2-hydroxy ethyl methacrylate (HEMA), methyl methacrylate (MMA). Experiment was performed to improve stability and emulsibility of surface treatment agent, and it was found that the polyurethane-acrylate hybrids having an optimum composition (MMA : 20%, LA(EO)3-S : 3% and TDA-7 : 5%) was shown to be quite surface active in the solid contents. These results suggests that the optimal polyurethane-acrylate hybrids in this study have high potential as top coating agent, which may have high gloss and excellent properties.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.132-137
• /
• 2006

Polyurethane acrylate hybrid emulsions were prepared by seeded polymerization techniques. In the synthesis, seeded polyurethane dispersion containing a carboxylic group was used to endow hydrophilicity to the hybrid emulsion and various acrylates such as methyl methacrylate (MMA), 2-hydroxy ethylmethacrylate (2-HEMA), n-butyl acrylate (n-BA) and acrylic acid (AAc) were used to endow hydrophobicity. The particle size and distribution of various emulsion particles such as polyurethane acrylate hybrid emulsion, polyurethane dispersion homopolymer, acrylate emulsion, and physical blending emulsion were measured by a particle size analyzer. The average particle size of hybrid emulsion was greater than physical blending emulsion. And tensile strength, 100% modulus, elongation, and swelling properties of the polyurethane acrylate hybrid emulsion were studied and compared with those of polyurethane homopolymer, acrylate emulsion, and physically blended compositor, respectively. To improve chemical and physical resistance, this paper review a melamine hardener and compares it for effects on the physical properties of cured coating.

• Elastomers and Composites
• /
• v.39 no.3
• /
• pp.209-216
• /
• 2004

Two types of polyurethane-acrylate polymer were synthesized by reaction of 2-hydroxyethyl methacrylate(HEMA), acrylamide(AA), and polyurethane prepolymer. Water-soluble cationic polyurethane/acrylate retention aids were prepared by using polyurethane-acrylate, benzyl chloride and distilled water. The retention, drainage and strength properties of the retention aids were investigated. The retention of cationic polyurethane/acrylate type retention aids maintained around 70 % regardless of nm. COD value of white water was much reduced by adding the retention aids to it. Drainage property was also improved by addition of the retention aids. In addition, specific compression strength of the paper was improved a little by addition of the retention aids. PU-HEMA type showed better performance than PU-AA in terms of compression strength of the paper.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.548-553
• /
• 2011

NCO terminated polyurethane prepolymers were synthesized from isophorone diisocyanate(IPDI), polycarbonate diol(PCD) and dimethylol propionic acid(DMPA). Subsequently, acrylic terminated polyurethanes were prepared by capping the NCO groups of polyurethane prepolymers with different types of acrylate monomers, such as 2-hydroxyethyl methacrylate(HEMA), 2-hydroxyethyl acrylate(HEA) and pentaerythritol triacrylate(PETA). The average particle sizes of the acrylic terminated polyurethane solutions were increased by capping acrylate monomers. Also, the prepared coating films showed better abrasion resistance and pencil hardness than those of pure waterborne polyurethanes. The coating film with PETA exhibited the best abrasion resistance and pencil hardness of coating films prepared with three acrylate monomers.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.410-416
• /
• 2012

Waterborne polyurethane dispersions (PUD) were synthesized from isophorone diisocyanate (IPDI), polycarbonate diol (PCD) and dimethylol propionic acid (DMPA) as starting materials. Subsequently, polyurethane-acrylic hybrid solutions were prepared by reacting the PUD with different types of acrylate monomers, such as HEMA (2-hydroxyethyl methacrylate):MMA (methyl methacrylate), HEMA:BA (butylacrylate), HEMA:BMA (butyl methacrylate), HEMA:HEA (2-hydroxyethyl acrylate), HEMA:PETA (pentaerytritol triacrylate) mixture. Also, the effects of acrylate types on the chemical resistance and the abrasion resistance of polyurethane-acrylic hybrid solutions were investigated. The test results showed that the HEMA:MMA mixture had the strongest chemical resistance, while the HEMA:PETA mixture had the strongest abrasion resistance among several types of acrylate mixtures.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.451-458
• /
• 2014

Waterborne polyurethane dispersion (WPUD) was prepared from polycarbonate diol (PCD), isophorone diisocyanate (IPDI) and dimethylol propionic acid (DMPA) as starting materials. Then, waterborne acrylic polyurethane dispersion (AUD) was synthesized by reacting the WPUD with different types of acrylate monomers, such as methyl methacrylate (MMA), 2-hydroxyethyl methacrylate (HEMA) and butyl acrylate (BA). Subsequently, the AUD was mixed with multi-walled carbon nanotube (MWCNT) to yield a conductive coating solution, and the mixture was coated on the polycarbonate substrate. The pencil hardness, abrasion resistance and chemical resistance of the coating films from AUD were improved than those from WPUD, while the electrical conductivity of the coating films from AUD was decreased than that of WPUD. Also, the effect of acrylate types on the properties of coating films was investigated. The AUD obtained from HEMA showed the strongest pencil hardness, while the AUD obtained from MMA exhibited the strongest abrasion resistance, chemical resistance and electrical conductivity among several types of acrylate monomers.

• Textile Coloration and Finishing
• /
• v.11 no.4
• /
• pp.1-7
• /
• 1999

Urethane-acrylate propelymers for secondary coating of optical fiber and high - performance material were prepared from the 4,4'-diphenylmethane diisocyanate(MDI), poly(tetramethylene oxide)glycol(PTMG, Mw 650 or 1000), 1,6-hexanediol(HD), 2-hydroxyethyl acrylate(HEA), and dibutyltin dilaurate as a catalyst. UV-Curable polyurethane acrylates were formulated from the urethane-acrylate prepolymers, three types of reactive diluents(DTs) having mono-, di-, and trifunctional-phenoxyethyl acrylate(PEA), hexanediol diacrylate(HDDA), and trimethylolpropane triacrylate(TMPTA), and 1-hydtoxycyclohexyl phenyl ketone(Irgacure 184) as a photoinitiator. The UV-cured films of polyurethane acrylates were obtained by curing using a medium-pressure mercury lamp(U W/cm, $\lambda_{max}=365\;nm)$. In this work, the effects of molecular weights of polyol and diol with low molecular weight into polymer chain on mechanical and dynamic mechanical properties of UV-cured polyurethane acrylates were studied. The structure and properties of the films obtained from the UV photopolymerization of urethane-acrylate prepolymer were investigated by FT-IR spectroscopy, dynamic mechanical measurement, tensile testing, and X-ray diffractometry.

• Elastomers and Composites
• /
• v.57 no.3
• /
• pp.100-106
• /
• 2022

Waterborne polyurethane-acrylate(WPUA) dispersions were prepared by surfactant-free emulsion polymerization in a two-step process. In the first step, polytetrahydrofuran, isophorone diisocyanate, dimethylol proponic acid, and 2-hydroxyethyl methacrylate were used to synthesize a vinyl-terminated polyurethane prepolymer. In the second step, styrene, methyl methacrylate, butyl acrylate, and different multi-functional crosslinkers were copolymerized. 1,6-hexanediol diacrylate, trimethylolpropane triacrylate, and pentaerythritol tetraacrylate were used as the crosslinkers, and their effect on the mechanical and thermal properties of WPUA was investigated. Overall, as the number of functional groups of the cross-linker increased, the gel fraction improved to 79.26%, the particle size increased from 75.9 nm to 148.7 nm, and the tensile strength was improved from 5.86 MPa to 12.40 MPa. In thermal properties, the glass transition temperature and decomposition temperature increased by 9.9℃ and 18℃, respectively. The chemical structures of the WPUA dispersions were characterized by Fourier-transform infrared spectroscopy. The synthesized WPUA has high potential for applications such as coatings, leather coatings, adhesives, and wood finishing.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.381-385
• /
• 2006

We applied a new analyzing technique for the polyurethane acrylate hybrid emulsion sample composed of polyurethane resin and acrylate resin using the phase-lag mapping techniques of atomic force microscopy. For the analysis, we synthesized similarly sized pure polyurethane dispersion and acrylate emulsion particles, which were used for measuring the standard phase-lag intensities for each material. Based on these signal intensity, we could discriminate acryl particle in the polyurethane dispersion matrix with the resolution of a few tens of nanometers. Thus, the techniques show a new possibility in the analysis of the organic two-phase particles, and we believe the techniques are helpful to design organic particles.

• Journal of Adhesion and Interface
• /
• v.16 no.4
• /
• pp.156-161
• /
• 2015

In this study, waterborne polyurethane acrylate were synthesized with polyester polyol, 4,4-dicyclohexylmethane diisocyanate ($H_{12}MDI$), dimethylol propionic acid (DMPA), acrylate monomer to improve the properties and peel strength. In addition, the properties of the synthesized waterborne polyurethane acylate was evaluated through FT-IR, particle size analysis, UTM, peel strength. As the acrylic acid content increased, particle size increased. In the results of mechanical properties, when the acrylic acid contents increased, tensile strength was increased but elongation was decreased. All peel strength was improved as the acrylic acid contents of WPUA and acrylate ratio of PU/acrylate increased. Optimum peel strength obtained when acrylic acid was 0.5 wt%.