• Elastomers and Composites
• /
• v.35 no.3
• /
• pp.227-235
• /
• 2000

This study focused on the recycling technology and application of waste polyurethane scrap($5{\sim}7mm$) and waste urethane form from the footware scrap. Firstly we suggest the waste polyurethane can be used as a component of medium for hydroponic rose culture. Secondly, recycled thermoplastic polyurethane(RTPU) was produced and blended it with high impact polystyrene(HIPS). And also, in order to extend application of recycling field, the former was produced with adding the amine foaming agent to RTPU/HIPS alloy. The main purpose of this study is to diverse of the recycling of the waste polyurethane.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.3089-3095
• /
• 2013

The headliner was made of polyurethane(PU) and glass fiber(GF) composite materials are widely used as a sound insulation material. A large amount of waste materials occurs as a by-product in the headliner manufacturing process. In order to efficiently reuse the headliner waste materials, separation process of the components are very necessary. According to the results of thermal analysis, weight loss showed increase in the order polyurethane foam> non-foaming polyurethane> non-woven fabric> 1st layer> glass fiber in the range of up to $400^{\circ}C$. Analysis of the DSC characteristics, HDPE, LLDPE, PP, and Master Batch by adding additives the wasted scrap. As a result, except for the PP, there was no exothermic transition due to the crystallization.

• Elastomers and Composites
• /
• v.33 no.1
• /
• pp.3-9
• /
• 1998

The production of polyurethane polymer has been increased because of their unique properties and variety process methods available. The generation of their wastes also increases with products. These byproducts of industrialization seriously threaten the environmental demanding. Therefore, development of the recycling technologies have been required. The main propose of this study is to develop the recycling technology of waste polyurethane from a footwear scrap. This technique is composed of the following procedure : crushing, devulcanizing, pelletizing, washing and drying. The pellet was characterized with various methods. The recycled polyurethane(RPU) was blended with HIPS(high impact polystyrene) and investigated morphologically and rheologically. The experimental results showed that the addition of 20% HIPS to RPU was limited without mechanical performance of the superial properties of a virgin polyurethane. We believe that these technical information make possible to develop a rational engineering product.

• Journal of Environmental Health Sciences
• /
• v.28 no.2
• /
• pp.41-49
• /
• 2002

Resource recovery and recycling of materials and products including polyurethanes are viewed as a necessity in today's society. The problems of recycling polyurethane wastes has major technological, economic and ecological significance because polyurethane itself is relatively expensive and its disposal by burning is also costly. In general, the recycling methods for polyurethane could be classified as mechanical, chemical and physical. In the chemical recycling method, there ate hydrolysis, glycolysis, pyrolysis and aminolysis. This study was carried out glycolysis using new method such as sonication and catalyzed reaction. There are kinds of recycled polyols were produced by current method(glycolysis) but, this study were with catalyzed reaction and sonication as decomposers and the chemical properties were analyzed. The reaction results in the formation of polyester urethane diols and then the OH value which is determined by the quantity of diol used for the glycolysis conditions. The glycolysis rates by sonication and catalyzed reaction for the various glycols, increased as: PPG

• Journal of the Korean Society of Safety
• /
• v.21 no.1 s.73
• /
• pp.65-71
• /
• 2006

Flame retardancy and mechanical properties of polyolefinic mixed waste plastics/filler composites were investigated by using inorganic flame retardant(magnesium hydroxide) and PUB(polyurethane block) powder generated from cryogenic insulation process. All composites were obtained by extrusion and after compression molding. The effect of PUB powder on the properties of the composites was studied by tensile and izod impact test, morphology studies and flammability as LOI and UL94 vertical burning test and smoke density. The objective of this work is to obtain good mechanical properties from recycled PP composites with $Mg(OH)_{2}/PUB$ powder as fillers and optimum cost-performance balance, in addition to flame retardant characteristics.

• Clean Technology
• /
• v.15 no.3
• /
• pp.172-179
• /
• 2009

The thermoplastic polyurethane waste (TPU-S) with good tensile properties, hardness, NBS abrasion resistance, specific gravity and low wet coefficient of kinetic friction was melt-blended with ethylene propylene diene monomer rubber (EPDM) with high wet slip resistance and low mechanical properties to form EPDM/TPU-S blend films, and their composition-property relationship was investigated to find the optimum composition for shoe outsole material. The properties except the wet slip resistance increased with increasing TPU-S contents in the blend. All the properties except elongation at break, specific gravity and the wet coefficient of kinetic friction in the range of $0{\sim}65\;wt%$ of TPU-S did not attain the values predicted by the simple additive rule. The optimum weight ratio of EPDM/TPU-S for the application to the typical shoe outsole material was found to be 30/70.

• Elastomers and Composites
• /
• v.29 no.5
• /
• pp.431-435
• /
• 1994

For recycling of the waste tires, polyurethane binder mixed with the scrapped rubber powders which obtained from tread part of waste tire. This study covered the effect of the binder contents on the mechanical properties of the blend. We also studied the change of the properties after aging on properties compared with those of before aging. The curing reaction of the binder was also investigated in this study. We obtained conclusions the suitable binder content was 15phr in this system.

• Elastomers and Composites
• /
• v.31 no.2
• /
• pp.95-103
• /
• 1996

Nowadays, recycling of waste materials is one of great attention among all industries. Especially, the waste tires become a significant problem with increasing in a number of automobiles. For recycling of the waste tires, a polyurethane binder was mixed with the scrapped rubber powders obtained from tread part of the waste tire. This study covered the effect of processing conditions;curing temperature and curing time;on the mechanical properties of the blend. We also compared the experimental results from labors-tory scale with those from scale-up.

• Macromolecular Research
• /
• v.17 no.8
• /
• pp.616-622
• /
• 2009

In-depth understanding of the influence of hot pressing and melt processing on the properties of thermoplastic polyurethane (TPU) is critical for effective mechanical recycling of TPU scraps. Therefore, this study focused on the effects of hot pressing and melt mixing on molecular weight (MW), polydispersity index (PDI), melt index (MI), characteristic IR peaks, hardness, thermal degradation and mechanical properties of TPU. The original TPU pellet (o-TPU) showed two broad peaks at lower and higher MW regions. However, four TPU film samples, TPU-0 prepared only by hot pressing of o-TPU pellet and TPU-1, TPU-2 and TPU-3 obtained by hot pressing of melt mixed TPUs (where the numbers indicate the run number of melt mixing), exhibited only a single peak at higher MW region. The TPU-0 film sample had the highest $M_n$ and the lowest PDI and hardness. The TPU-1 film sample had the highest $M_w$ and tensile modulus. As the run number of melt mixing increased, the peak-intensity of hydrogen bonded C=O stretching increased, however, the free C=O peak intensity, tensile strength/elongation at break and average MW decreased. All the samples showed two stage degradations. The degradation temperatures of TPU-0 sample (359 $^{\circ}C$ and 394 $^{\circ}C$)were higher than those of o-TPU (342 $^{\circ}C$ and 391 $^{\circ}C$). While all the melt mixed samples degraded at almost the same temperature (365 $^{\circ}C$ and 381 $^{\circ}C$). The first round of hot pressing and melt mixing was found to be the critical condition which led to the significant changes of $M_n$/$M_w$/PDI, MI, mechanical property and thermal degradation of TPU.