• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.4
• /
• pp.397-402
• /
• 2013

In this study, we carried out the each lines of section, using GC (green silicon carbide) whetstone, the SCM415 material which separated by after and before heat treatments process, in 3+2 axis machining centers for integrated grinding after cutting end mill works, the spindle speed 8000 rpm and feed rate 150 mm/min. For the analysis of the centerline average roughness (Ra), we measured by 10 steps stages. Using Finite element analysis, we found the result of the load analysis effect of the assembly parts, when applied the 11 kg's load on both side of the ATC (Automatic tool change) arm. The result is as follows. For the centerline average roughness (Ra) in the non-heat treatment work pieces, are appeared the most favorable in the tenth section are $0.510{\mu}m$, that were shown in the near the straight line section which is the smallest deformation of curve. In addition, the bad surface roughness appears on the path is to long by changing angle, the more inclined depth of cut, because the chip discharging is not smoothly.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.47 no.2
• /
• pp.79-89
• /
• 2023

This paper is about the development results of an automatic silkworm breeding system to reduce labor and time by automatically performing the works for silkworm droppings changing and feed its food. It consists of an automatic guided vehicle and a processing unit. The automatic guided vehicle transports a silkworm dropping changing frame mounted on a silkworm tray stand, and the processing unit takes over the dropping changing frame on it, removes excrement contained the droppings changing frame and feeds silkworm food. In the case of the current silkworm farming, because the breeding period for large silkworms (4 to 5 stage) is short to 14 days and the supply of mulberry leaves takes 98% of the total amount of mulberry leaves needed for breeding silkworms at this time, labor concentration is intensive, and all breeding works depends on manpower. Therefore, it was difficult to breed large silkworms on a large scale. Moreover, silkworms are bred by adding Silkworm bed (Seop) and mulberry in the silkworm tray, and their droppings changing is to separate silkworms and excrement by moving silkworm trays one by one, and the production cost increases due to the high-cost manpower for silkworm breeding. To solve this problem, technology for automating silkworm breeding has also been developed. However, there is still a limitation that silkworm feeding and droppings changing works are not suitable for mass breeding because a lot of labor and time are spent depending on manual work. Therefore, a new silkworm breeding system for breeding silkworm automatically is needed and so we developed an Automatic Silkworm Breeding System applying the droppings change frame, the inverting unit, the feeding silkworm food device and automatic guided vehicle.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.467-476
• /
• 2020

The purpose of this study is as a base study for improving the quality of online classes through multilateral analysis that examines the learning outcoms of educational quality and learning emotions on non-face-to-face online classes at Technical Colleges To this study, from March 1, 2020 to August 31, 2020, a survey was conducted on 1,000 students of H Technical Colleges located in the metropolitan area. The collected data were statistically processed using the SPSS Statistics 18.0 program, t-validation were performed to reveal awareness of online class also correlation analysis and multiple regression analysis were performed to reveal the relation and influence of factors related to quality of instruction, learning emotions, learning outcomes. First, there was a statistically significant difference in perception of online classes by gender and grade. Second, there was a positive correlation between the educational quality, learning emotions, and learning outcomes for online classes. Third, among the learning outcomes, the factors that influence the achievement were the educational content and positive emotions, and the factors that influence the satisfaction among the learning outcomes were the educational content and the learning environment.

• Journal of Labour Economics
• /
• v.28 no.2
• /
• pp.93-117
• /
• 2005

This study aims to examine the transition of the youth to the labor market by types of education and training institutes focusing employment rate. To construct the dataset for the analysis, the list of the graduates from 4-year universities, junior colleges, polytechnic colleges and the graduates from vocational training institutes as of February 2001 has been merged with the database for the insured in the Unemployment Insurance Database. This data enables tracking down of these graduates in terms of their mobility in the labor market. For graduates from universities and junior colleges, their scores on the Scholastic Aptitude Test have been matched. One of major findings is that the longer the schooling period is, the better the employment results are. Among those who finished 4-year universities, those who went to schools in the metropolitan area achieve a relatively better record in job finding than those who attended schools in the local areas. Meanwhile it is confirmed that the SAT score is highly co-related with the performance in the labor market among those who finished 4-year universities. The co-relation of one's major with his/her employment is not negligible also.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.694-711
• /
• 2016

National Competency Standards (NCS) is a good resource for curriculum development and operations corresponding to the industrial damand. Recently, four-year colleges and universities are committed to a restructuring of the industry demand-driven training courses in order to strengthen competitiveness. However, NCS is focused to train the technical personnel in vocational training institutions(ex. College, Polytechnic University). Accordingly, NCS applications of four-year colleges and universities are hard to find. In this study, we propose a new model for NCS-based curriculum development and operations. Also, NCS was utilized to complement the existing curriculum. This paper includes the following contents; 1) NCS-based curriculum development process, 2) NCS-based course development and operation, 3) learner satisfaction analysis. Finally, this study provide practical implications to four-year colleges and universities to consider NCS application.

• Korea Journal of Hospital Management
• /
• v.21 no.1
• /
• pp.43-50
• /
• 2016

The public medical centers are required to make efficient and profitable operation. The efficiency is usually measured by DEA(data envelopment analysis), and profitability is measured by medical income rate. But DEA is measured by relative, not absolute value. So, profitability rate is used alternatively for DEA. This study want to analyze the interchangeability between DEA ranking and medical income rate ranking among public medical centers. The return on total assets is same ranking with DEA on bed number, employee number and total asset, but 60-70% relationship with DEA on bed number and employee number, as input resources. The operating margin is similar ranking with DEA on bed number and employee number, but 50-60% relationship with DEA on bed number, employee number and total asset, as input resources.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.81-82
• /
• 2013

In this study, precipitation behaviors of hydroxyapatite on highly ordered nanotubular Ti-35Ta-xNb alloy surface were researched. Ta and Nb additions to Ti increased corrosion resistance. The surface characteristics of anodized alloy depended on the nanotube formed voltage and alloy element. The HA precipitation morphology was influenced by nanorubular structure of alloys.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.418-424
• /
• 2014

A large number of wire rope has been used in various industries such as cranes and elevators. When wire used for a long time, wire defects occur such as disconnection and wear. It leads to an accident and damage to life and property. To prevent this accident, we proposed a wire rope fault detection system in this paper. We constructed the whole system choosing the leakage fault detection method using hall sensors and the method is simple and easy maintenance characteristics. Fault diagnosis and analysis were available through analog filter and amplification process. The amplified signal is transmitted to the computer through the data acquisition system. This signal could be obtained improved results through the digital filter process.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.220-222
• /
• 2007

본 논문에서는 유아의 환경인식 변화를 위하여 호기심이 많고 한 곳에 집중하는 시간이 짧은 유아의 특성을 고려한 캐릭터를 모델링하고 시나리오를 작성하여 2D애니메이션을 제작 하였다. 본 애니메이션을 통하여 흙이 더럽혀지는 이유와 환경을 보전해야하는 이유를 알아봄으로써 환경보전에 대한 인식과 태도를 형성 하고 환경 보전에 대한 인식의 변화를 통하여 환경보호를 행동으로 실천 할 수 있도록 도웅을 주는 데에 그 목적이 있다.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.1
• /
• pp.39-46
• /
• 2007

The objective of this paper is to examine the detection limit, growth characteristics and notch curvature radius in short crack problem. Measurement techniques such as ultrasonic method and back-face strain compliance method were adapted. The fatigue crack growth rate of the short crack is slower than that of a long crack for a notched specimen. The short crack is detected effectively by ultrasonic method. A short surface crack occurs in the middle of specimen thickness and is transient to a through crack when maximum crack depth is larger than the notch curvature radius.