• 한국의류산업학회지
• /
• 제22권3호
• /
• pp.386-398
• /
• 2020

This study compared dip-coating and in situ polymerization methods for the development of nanofiber-based E-textile using polypyrrole. Nanofiber webs were fabricated by electrospinning an aqueous poly (vinyl alcohol) (PVA) solution. Subsequently, the PVA nanofiber web underwent thermal treatment to improve water resistance. Dip-coating and in situ polymerization methods were used to deposit polypyrrole on the surfaces of the nanofiber web. An FE-SEM analysis was also conducted to examine specimen surface characteristics along with EDS and FT-IR that analyzed the chemical bonding between polypyrrole and specimens. The line resistance and sheet resistance of the treated specimens were measured. Finally, an electrocardiogram (ECG) was measured with textile sensors made of the polypyrrole-deposited PVA nanofiber webs. The polypyrrole-deposited PVA nanofiber webs fabricated by dip-coating dissolved in the dip-coating solution and indicated damage to the nanofibers. However, in the case of in situ polymerization, polypyrrole nanoparticles were deposited on the surface and inter-web structure of the PVA nanofiber web. The resistance measurements indicated that polypyrrole-deposited PVA nanofiber webs fabricated by in situ polymerization with an average sheet resistance of 5.3 k(Ω/□). Polypyrrole-deposited PVA nanofiber webs fabricated by dip-coating showed an average sheet resistance of 57.3 k(Ω/□). Polypyrrole-deposited PVA nanofibers fabricated by in situ polymerization showed a lower line and sheet resistance; in addition, they detected the electrical activity of the heart during ECG measurements. The electrodes made from polypyrrole-deposited PVA nanofiber webs by in situ polymerization showed the best performance for sensing ECG signals among the evaluated specimens.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.448-451
• /
• 2002

The possibility of using polypyrrole as a drug delivery system(DDS) has been studied using indicate (Phenol red) and substance with therapeutic activity(Sodium salicylate). In aqueous solution, negative potential is applied to polypyrrole then anion(with therapeutic activity) of sodium salicylate is released by redox processes of polypyrrole. The release amount of anionic drugs from polypyrrole is measured by UV-visible spectrometer which can measure UV-absorbance of materials. Electrode area that use for release amount measurement is$50mm^{2}(5{\times}10mm)$,and thickness of polypyrrole membrane is $15{\mu}m$. DC 1V applied in saline solution, the release amount according to time increased gradually. In various electrode area, release amount of anionic drug is directly to electrode area.

• Macromolecular Research
• /
• 제16권3호
• /
• pp.200-203
• /
• 2008

A conducting polymer layer was introduced into the pore surface of mesoporous carbon via vapor infiltration of a monomer and subsequent chemical oxidative polymerization. The polypyrrole, conducting polymer has attracted considerable attention due to the high electrical conductivity and stability under ambient conditions. The mesoporous carbon-polypyrrole nanocomposite exhibited the retained porous structure, such as mesoporous carbon with a three-dimensionally connected pore system after intercalation of the polypyrrole layer. In addition, the controllable addition of pyrrole monomer can provide the mesoporous carbon-polypyrrole nanocomposites with a tunable amount of polypyrrole and texture property. The polypyrrole layer improved the electrode performance in the electrochemical double layer capacitor. This improved electrochemical performance was attributed to the high surface area, open pore system with three-dimensionally interconnected mesopores, and reversible redox behavior of the conducting polypyrrole. Furthermore, the correlation between the amount of polypyrrole and capacitance was investigated to check the effect of the polypyrrole layer on the electrochemical performance.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.777-782
• /
• 2008

초음파 중합법을 이용하여 pyrrole을 중합시킴으로써 polypyrrole 나노입자를 합유하는 메조포러스 $TiO_2$ 박막을 합성하였다. 메조포러스 $TiO_2$ 박막을 만들기 위한 $TiCl_4$-계면활성제 용액에 pyrrole을 넣어주고 초음파 중합시킴으로써 용액 내에 polypyrrole 나노입자들이 잘 분산된 형태로 만들어졌다. 이 용액을 이용하여 spin-coating과 열처리를 함으로써 polypyrrole 나노입자를 합유하는 메조포러스 $TiO_2$ 박막을 제조하였다. 열처리 후에도 기공 구조는 잘 유지되었으며, polypyrrole 나노입자들이 박막 내에 잘 분산되었다. 주형물질인 계면활성제의 종류와 pyrrole의 양을 조절함으로써, 합성된 박막의 기공 크기와 빛의 흡광도를 조절하였다.

• Fibers and Polymers
• /
• 제3권1호
• /
• pp.24-30
• /
• 2002

Wool yams were coated with conducting Polypyrrole by chemical synthesis methods. Polymerization of pyrrole was caned out in the presence of wool yarn at various concentrations of the monomer and dopant anion. The changes in tensile, moisture absorption, and electrical Properties of the yam upon coating with conductive polypyrrole are Presented. Coating the wool yams with conductive Polypyrrole resulted in higher tenacity, higher breaking strain, and lower initial modulus. The changes in tensile properties are attributed to the changes in surface morphology due to the coating and reinforcing effect of conductive Polypyrrole. The thickness of the coating increased with the concentration of p-toluene sulfonic acid, which in turn caused a reduction in the moisture regain of the wool yin. Reducing the synthesis temperature and replacing p-toluenesulfonic acid by anthraquinone sulfonic acid resulted in a large reduction in the resistance of the yam.

• 공업화학
• /
• 제30권2호
• /
• pp.186-189
• /
• 2019

폴리피롤(polypyrrole)은 전기를 전도하는 고분자로 뛰어난 전기적 신호 전달을 지니며, 사이클로덱스트린(cyclodextrin)은 환형다당류(cyclic oligosaccharide) 분자들로서 저분자량 물질을 포획할 수 있는 친환경 물질로 널리 활용되고 있다. 따라서 이들 두 가지 물질을 혼합하여 혼성체를 제조할 수 있다면 사이클로덱스트린이 host가 되어 guest 물질을 포획하였을 때 발생하는 전기 신호를 폴리피롤이 민감하게 전달할 수 있게 되어 우수한 감지 능력을 갖게 된다. 따라서 본 연구에서는 폴리피롤/사이클로덱스트린 혼성체를 간단한 수용액 방식으로 제조하여, 제조된 혼성체를 하이드로젤(hydrogel)에 도입하여 건조한 후 금 전극 위에 적용하여 대표적인 유해성 분자인 메틸파라벤(methyl paraben)을 검출할 수 있는지에 대해서 살펴보았다. 그리고 폴리피롤만으로 이루어진 물질과 비교해 봤을 때, 사이클로덱스트린의 도입효과는 존재하는 것으로 나타났다. 이 연구는 전도성 고분자와 친환경 분자 혼성체를 유해물질 감지에 활용할 수 있는 가능성을 제시하고 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.421-424
• /
• 2006

Nafion/Pt/Polypyrrole composite membranes were fabricated by chemical in-situ polymerization of pyrrole monomers with Pt precursors in Nafion matrix for DMFC. We demonstrated that positively charged pyrrolinum groups of polypyrrole particles were co-interacted with sulfonic groups of Nafion as verified by FT-IR results. Mutual interaction between $Nafion-SO_3^-$ (or negatively charged Pt precursors) and Polypyrrole$-NH_2^+$ influenced the physical properties of pristine Nafion. Thermal property proton conductivity, methanol permeability, and cell performance of pristine and modified Nafion were analyzed for an application of DMFC membrane. Thermal stabilities of sulfonic groups and side chains in Nafion/Pt/polypyrrole composite membranes were higher than those of Nafion due to mutual interaction between sulfonic groups of Nafion and pyrrolinum groups of polypyrrole. Methanol permeabilities of Nafion/Pt/Polypyrrole composite were reduced more proton conductivities with the increase in the content of Pt particles. As a result of that, the enhancement of cell performance by Nafion/Pt/Polypyrole O2 relative to Nafion was more pronounced under the specific experimental condition such as high temperature and more concentrated methanol solution.

• 센서학회지
• /
• 제12권4호
• /
• pp.156-163
• /
• 2003

일반적인 표면 마이크로머시닝 공정과 고분자의 중합공정을 결합하여 전도성 고분자인 폴리피롤 액추에이터를 제작하였다. 폴리피롤 액추에이터의 제작 공정을 검증하기 위한 가장 기본적인 구조물은 폴리피롤 캔틸레버이며 이를 이용하여 세포 조작에 응용 가능한 폴리피롤 그리퍼 및 밸브의 기본 구조물들을 제작하였다. 그리퍼는 손가락과 유사한 형태로 뼈에 해당하는 단단한 고분자와 근육에 해당하는 폴리피롤 등으로 구성된다. 밸브는 폴리피롤 캔틸레버에 유로가 결합된 형태로 제작되었다. 제안한 폴리피롤 액추에이터의 제작 공정 및 기본 구조물들은 세포 조작기구와 같은 바이오 관련 응용에 이용될 수 있을 것이다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 가을 학술발표회논문집
• /
• pp.49-52
• /
• 1998

Preparation of conducting Polymer composites by Polymerizing Polypyrrole in thermoplastic polymer matrices has been studied by many researchers in order to enhance the stability and the Physical Properties of polypyrrole. In the previous study4 we examined the effects of the ionic group content and the copolyester molecular structures on the electrical conductivity of conductivity of polypyrrole(PPy)/copolyester composite films. (omitted)

• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2699-2702
• /
• 2012

Gold-polypyrrole segment nanowires prepared using anodized aluminum oxide templates can be assembled into a curved superstructure that shows stimuli-induced contraction and expansion. The radius of the superstructures can be predicted using the simple equation suggested by J. K. Lim et al. (Nano Lett. 8, 4441 (2008)). The suggested equation, however, is valid only within the limiting condition in that the length of the polypyrrole segment is comparable to, or much longer than the gold segment. In this study, the original equation was modified to a new equation that is valid for all length scales of polypyrrole segments. The radius of the superstructures calculated using the modified equation was compared with the result calculated by the original equation, and the validity of the modified equation is discussed.