• Macromolecular Research
• /
• v.15 no.1
• /
• pp.31-38
• /
• 2007

Pentamethylcyclopentadienyltitanium trichloride, bis(cyclopentadienyl)titanium dichloride ($Cp_2TiCl_2$), and bis(pentamethylcyclopentadienyl)titanium dichloride were used in the polymerization of styrene without the aid of Group I-III cocatalysts. The properties of the resulting polymer indicated that polymerization was more controlled than in thermal polymerization. The kinetic studies indicated that a lower level of termination is present and that the polymer chain can be extended by adding an additional monomer. To elucidate the mechanism of polymerization, a series of experiments was performed. All results supported the involvement of a radical mechanism in the polymerization using $Cp_2TiCl_2$. The possibility of atom transfer radical polymerization (ATRP) mechanism was investigated by isolating the intermediate species. We could confirm the activation step from the reaction of 1-PEC1 with $Cp_2TiCl$ by detecting the coupling product of the generated active radicals. However, the reversible deactivation reaction competes with other side reactions, and it detection was difficult with our model system.

• Journal of the Korean Chemical Society
• /
• v.22 no.6
• /
• pp.423-430
• /
• 1978

The initiation mechanism of trioxane polymerization catalyzed by Ti$Cl_4$ in nitrobenzene was investigated. The kinetic studies revealed that the rate of polymerization was drastically decreased by the addition of a minute amount of water or methanol. A third substance as cocatalyst was not required for the polymerization. Measurements of dielectric constants gave no evidence for the zwitterionic mechanism of the polymerization. The electric conductivity measurements of polymerization system and the initiator solution showed that the initiation was started by Ti$Cl_3^+$ cation, formed by a disproportionation of the initiator in nitrobenzene.

• Journal of Sericultural and Entomological Science
• /
• v.34 no.1
• /
• pp.49-56
• /
• 1992

Treatment of vinyl monomers onto silk fiber modifies the properties of the original silk fiber considerably. This field has been the subject of investigation by many workers using chemical and radiation initiation. Many studies on the reaction conditions, polymerization mechanism, physical properties and practical performances of methacrylamide-treated silk fiber have been continued. However, the polymerization mechanism has not been clearly revealed yet and this remains ambiguously whether the grafting is formed on fiber or not. In general, it has been accepted that free radicals were formed and vinyl monomers were polymerized in silk fibroin by graft polymerization mechanism, while active sties were varied by the types of monomer and initiator as well as by the reaction conditions. On the other hand, there is another argument on polymerization mechanism, in which monomers are polymerized and impregnated in the internal side of the fiber by homopolymerization. Though a large number of analytical methods are used to examine the polymerization mechanism of methacrylamide-treated silk fiber, the results on the basis of thermal analysis are merely reported in this paper. In differential scanning calorimetry (DSC) analysis, the thermal decomposition behaviors of the methacrylamie-treated silk fibers were determined and compared to those of the controlled silk fibers. DSC curves obtained from the methacrylamide-treated silk fibers showed double peaks at around 290$^{\circ}C$ (A peak) and 320$^{\circ}C$ (B peak) which are attributed to the thermal decomposition of the methacrylamide polymer and silk fibroin fiber, respectively. The temperature of A and B peak shifted to higher value with the increase of add-on. Also, the moisture regain of the treated silk fibers increased with add-on.

• Journal of Sericultural and Entomological Science
• /
• v.34 no.2
• /
• pp.32-40
• /
• 1992

Many studies have been carried out on the graft finishing in order to improve the quality of silk fiber. Various vinyl monomers, for instance, styrene, methylmethacrylate, 2-hydroxyeth-ylmethacrylate and methacrylamide, have been used practically up to date. Among these monomers, methacrylamide has been applied as the most favourable monomer onto silk fibers in recent years. The polymerization mechanism about styrene- and methylmethacrylate-grafted silk fiber has been studied by many researchers. They proposed that free radicals were formed and vinyl monomers were polymerized in silk fibroin by graft polymerization mechanism, while active sites were varied by the types of monomer and initiator as well as by the reaction condition. In general. there is another Opinion that monomers are polymerized and impregnated in the internal side of the fiber by homopolymerization, which has not been proved experimentally yet More than 10 years have been passed since methacrylamide was applied on the silk fiber, and at the present time most finishings are being achieved by methacrylamide. However, no attention has been paid to the polymerization mechanism of the methacrylamide-treated silk fiber yeL In this paper, the treatments of methacrylamide on silk fibers were studied in aqueous solution using potassium persulfate as an initiator. The polymerization mechanism of the methacrylamide-treated silk fibers was investigated and analyzed on the basis of the results of infrared spectroscopy, amino acid analysis and scanning electron microscopy. From the results of these instrumental analyses, it can be suggested that polymerization mechanism about the methacrylamide-treated silk fibers is not performed by graft polymerization which has been accepted generally in styrene and methylmethacrylate-grafted silk fibers. The different mechanism is supposed to be due to the difference in monomer types, initiator types and treatment conditions.

• Elastomers and Composites
• /
• v.14 no.4
• /
• pp.231-252
• /
• 1979

Polymerization of 2-pyrrolidone was carried out through anionic mechanism using $SO_2/KOH$ as catalyst. The effects of KOH concentration, $SO_2/KOH$ mole ratio and temperature on polymerization were investigated. The conversion and viscosity of polymers were measured at various polymerization conditions. It was observed that as the concentration of KOH was increased, equilibrium conversion was also increased. It was, however, found that after the concentration of KOH was reached above 8 mole percent, the equilibrium conversion was decreased. The highest rate of polymerization and maximum conversion were obtained when $SO_2/KOH$ mole ratio was around 0.5. It was also found that the rate of polymerization and the equilibrium conversion were higher at $50^{\circ}C$. than at $30^{\circ}C$. but the viscosity of polymer solution at $50^{\circ}C$. was not so high as expected. The rate constant, $K_p$ of polymerization, was determined by least square method: the value of $K_p$ was observed as 16 liter/mole hour at $50^{\circ}C$. and 2.6 liter/mole hour at $30^{\circ}C$., respectively. The mechanism of polymerization was also discussed.

• Macromolecular Research
• /
• v.8 no.4
• /
• pp.147-152
• /
• 2000

The activity of periodic acid as an initiator for the polymerization of acrylamide in aqueous medium was investigated. The rate of polymerization was found to be proportional to the monomer concentration to the 1.5th power in the range of 1.41-5.64 mol/L. The reaction order to the periodic acid concentration was 0.49, which indicated a bimolecular mechanism for the termination reaction in the range of 0.5-4.0$\times$10$\^$-2/ mol/L. Propagation rate increased with raising the temperature according to an Arrhenius expression resulting in the exhibition of an apparent activation energy of 87.8 kJ/mol in the temperature range of 60-80$\^{C}$. The addition of hydroquinone as a radical scavenger stopped the polymerization of acrylamide initiated by periodic acid. These results support that the polymerization proceeds via a radical chain mechanism .

• The Korean Journal of Physiology and Pharmacology
• /
• v.26 no.3
• /
• pp.175-182
• /
• 2022

Translocation of azurophil granules is pivotal for bactericidal activity of neutrophils, the first-line defense cells against pathogens. Previously, we reported that lysophosphatidylcholine (LPC), an endogenous lipid, enhances bactericidal activity of human neutrophils via increasing translocation of azurophil granules. However, the precise mechanism of LPC-induced azurophil granule translocation was not fully understood. Treatment of neutrophil with LPC significantly increased CD63 (an azurophil granule marker) surface expression. Interestingly, cytochalasin B, an inhibitor of action polymerization, blocked LPC-induced CD63 surface expression. LPC increased F-actin polymerization. LPC-induced CD63 surface expression was inhibited by both a Rho specific inhibitor, Tat-C3 exoenzyme, and a Rho kinase (ROCK) inhibitor, Y27632 which also inhibited LPC-induced F-actin polymerization. LPC induced Rho-GTP activation. NSC23766, a Rac inhibitor, however, did not affect LPC-induced CD63 surface expression. Theses results suggest a novel regulatory mechanism for azurophil granule translocation where LPC induces translocation of azurophil granules via Rho/ROCK/F-actin polymerization pathway.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.1
• /
• pp.29-35
• /
• 1987

TPolystyrene thin films are prepared by glow discharge of sytrene monomer vapor th establish the growth mechanism of organic thin films by the plasma polymerization. As the discharge parameters, discharge current(5mA-20mA), frequency (10kHz-50kHz, 13.56MHz), gaspressure (0.2torr-1.5torr), and discharge time(2min-12min)are adopted. Plasma-polymerized filmsof styrene vapor are identified as polystyrene by IR spectra. The thickness of plasma-polymerized films increases with gas pressure, frequency and discharge current in the region of the low frequency and below the allowed gas pressure where the polymerization occurs. It is suggested that the growth mechanism can be explained by ionic reaction in d.c. and low frequency region, and by radical reaction in high frequency region.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.11
• /
• pp.1269-1276
• /
• 1999

Metallocenes, whether using a cocatalyst or not, act as catalysts in ethylene polymerization. The positive charge on the transition metal of a metallocene might have an important role in polymerization as an active site in our model approach. Using semiempirical calculations in the absence of cocatalyst, we show one of the possibilities that the positive charge on a metallocene might be more easily transferred through the Cp ring of a ligand to the ethylene than to transfer directly from the transition metal to the ethylene. In these calculations, the charge on titanium in an eight C2H4 system is transferred and a polymer chain is produced. This reaction takes place only when ethylenes are arranged in a particular direction with respect to the ring, but does not take place for ethylenes near Ti or Cl atoms. The same mechanism is shown for a metallocene ligand which is sterically hindered or where the Cp ring is replaced by fluorenyl. These results suggest an entirely new polymerization mechanism in the absence of a cocatalyst in which the Cp ring is the active site.

• Elastomers and Composites
• /
• v.33 no.4
• /
• pp.255-266
• /
• 1998

One-step continuous reactive blend with EPDM is investigated using a modular intermeshing corotating twin screw extruder This was performed via anionic polymerization mechanism. Mechanical properties were characterized and compared with mechanical blends.