• 공업화학
• /
• 제24권6호
• /
• pp.656-662
• /
• 2013

원자력발전소의 2차 계통수 중에 존재하는 철산화물(magnetite)은 열전달 튜브의 표면에 침착(fouling)되어 열전달 성능을 떨어뜨리거나 부식을 유발한다. 이와 같은 문제를 방지하기 위해, 원전 2차 계통수 중에 고분자 분산제(polymeric dispersant) 주입을 통해 철산화물의 분산 안정성 향상을 도모하는 연구를 수행하였다. 카르복실기(-COOH, carboxyl group)를 함유한 3종의 음 이온성 고분자(PAA, PMA, PAAMA)를 선정하였으며, 이들에 농도변화(1~1000 ppm)에 의한 마그네타이트 분산 특성을 평가하기 위해 침강시험, 투과율 측정, 입도 측정, 제타전위 측정을 수행하였다. 고분자 분산제는 수용액 중 철산화물 분산안정성에 큰 영향을 미쳤다. 분산제가 주입되면 분산 안정성이 향상되는 경향을 보였으나, 분산제 농도 증가에 따라 마그네타이트의 분산 안정성이 선형적으로 비례하여 증가하지 않았다. 이는 임계 분산제 농도 이상에서는 철산화물 사이의 응집(agglomeration)이 발생하기 때문인 것으로 사료된다. 분산안전성 향상 효과는 분산제-철산화물의 농도비(ppm, 분산제/마그네타이트)가 0.01~0.1 범위에서 현저하였다. 분산제 주입을 통한 철산화물 제거 효과를 최대화하기 위해서는 적용 환경 특성, 철산화물 농도, 분산제 농도 및 철산화물-분산제 농도비의 최적화가 필요한 것으로 판단된다.

• 접착 및 계면
• /
• 제17권3호
• /
• pp.89-95
• /
• 2016

유연한 식품포장필름에 사용되고 있는 드라이 라미네이션용 유성접착제를 대체하기 위해, 고분자 분산제를 사용하여 유화하는 방법으로 수성 감압점착제를 친환경적으로 설계하였다. 유화중합에서 널리 사용하는 저분자량의 계면활성제는 물성의 변수로 작용해 왔다. 본 연구에서는 먼저 용액중합으로 polymeric nano-dispersant (PND)를 제조하고, 이 PND 입자들의 분산제를 micelle seed로 이용하여 core-shell grafted acrylic 점착제를 합성하였다. 이때 입자의 바깥층(shell)과 입자내층(core)의 $T_g$를 달리하여 얇은 필름의 점착조건인 초기접착력과 유지력의 균형을 이루도록 설계하였다. 최적화된 시험군 합성 점착제의 물성을 국내외 제조사에서 개발된 연구시료들과 비교분석하여, 점착제로서의 물성을 검토하였다. 물성 비교 결과, 본 연구에서 설계 합성한 저분자량의 계면활성제를 대체 사용한 고분자 나노분산제 기반 core-shell 점착제가 연포장에 적합한 점착물성을 나타냄을 확인하였다.

• 한국세라믹학회지
• /
• 제32권8호
• /
• pp.901-908
• /
• 1995

In aqueous slurry processing of silicon nitride, the interaction of dispersant and binder used as polymeric processing additives on the silicon nitride particle surface was studied to identify the effect of these processing polymeric additives on the ceramic powder processing. The adsoprtion isotherm study of anionic organic molecule as dispersant and nonionic organic molecules as binder of silicon nitricde was studied to investigate the effect of these processing organic additives on the physicochemical properties of silicon nitride particles. As anionic molecule adsorbed onto silicon nitrice surface, the IEP of silicon nitride shifted toward acidic pH and changed the stability of silicon nitride particle. However, the adsorption of binder as nonionic organic molecule onto silicon nitride surface did not changed the IEP but caused the decrease of electrostatic potentials of silicon nitride. These distinctive adsorption behaviors of organic additives on silicon nitride particles can be closely correlated to the stability of silicon nitride particles suspended in aqueous media.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 춘계학술강연 및 발표대회강연 및 발표논문 초록집
• /
• pp.59-60
• /
• 2006

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2005년도 추계학술강연 및 발표대회강연 및 발표논문 초록집
• /
• pp.61-62
• /
• 2005

• Tribology and Lubricants
• /
• 제31권6호
• /
• pp.251-257
• /
• 2015

Heavy oil production is receiving significant attention because of increased demands for thermal power generation systems of the diesel engine and boilers. However, asphaltene, which is a heavy oil components (6-8 wt%), reduces the heat efficiency of the fuels owing to its agglomerated sludge of asphaltene during the burning process. Therefore, for hassle-free operation, we should develop asphaltene dispersants to suppress the formation of the sludge. We prepare variable salt-type polymeric dispersants using poly(isobutenyl succinic anhydride) and poly(amine) through both condensation esterification and acid-base neutralization reactions, which we subsequently evaluate for dispersing performance, using Turbiscan measurement. Total acid number (TAN) and total base number (TBN) of 75Lec-25SynDis.2 composed of lecithin and the prepared polymeric salt having the ratio of 3 : 1 are 18.9 and 33.7 mg KOH/g, respectively, which are comparable to those of the commercial dispersants (15.8 and 26.5 mg KOH/g). We determine the initial turbidity observed for 15 min of the polymeric dispersant was determined with transmittance (%), which can be calculated to separability number (SN). The SN value of 75Lec-25SynDis.2 is close to zero, which is superior to that of commercial dispersants and lecithin (0.015 and 0.017).

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.394-398
• /
• 1997

Mn-Zn ferrite powders were prepared by alcoholic dehydration, using coprecipitation method. Then the effects of organic dispersant and polymeric binder concentration on stability and casting of slurry were discussed. Citric acid, the organic dispersant and polyvinylacohol(PVA), the non-ionic binder, were selected as additives of slurry. With variation of concentration of water, citric acid and polyvinylalcohol(PVA), optimum forming conditions were determined from viscosity and density. To compare with dry process, density and microstructure of sintered body formed by uniaxial die pressing were observed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1370-1373
• /
• 2006

The Cu-Ag nanoparticles have been synthesized in aqueous medium using a hydrazine reduction method. The assisted role of polymeric dispersant on synthesis of highly concentrated Cu-Ag nanoparticles was studied. The 30wt% of Cu-Ag nanoparticles with the range of 10 nm in diameter was prepared.

• 한국세라믹학회지
• /
• 제43권9호
• /
• pp.519-526
• /
• 2006

A full-factorial design of experiments with three input factors and two levels for each factor including center points was utilized for the preparation and characterization of twelve types of $BaTiO_3$ slips for tape casting. Ceramic powders with different particle sizes, different milling methods such as high energy milling and conventional ball milling, and two types of dispersant with different polymeric species were chosen as input factors in order to investigate their effects on slip and on green tape properties. Tape casting, a small rectangular-shaped K-square preparation, characterization and quantitative data analysis using statistical software were followed. Ceramic powder was the most significant among three input factors for the output responses of slip viscosity and green tape density, showing more favorable results with large particles than with very fine ones. In addition, high energy milling for only 30 min was more efficient than 24h of conventional ball milling in terms of powder dispersion and milling. The optimum condition based on the experimental results was a slip exposed to high energy milling with large ceramic particles along with a methylethyl acetate dispersant.

• Tribology and Lubricants
• /
• 제30권4호
• /
• pp.224-233
• /
• 2014

We prepared polyester-polyamines to improve the effect of carbon black dispersibility for use in thermal transfer ink, and synthesized polymeric dispersing agents by two-step reactions. In the first step, we made polyester by polycondensing 1,6-hexanediol and adipic acid. The resulting polymers had carboxylic acid, which was linked with polyamine via an acid-base reaction. We then characterized the polyester-polyamine structure by NMR spectroscopy and Fourier transform infrared spectroscopy (FT-IR). We also determined the basic characterizations such as total acid numbers (TAN) (5.0-67.5 mgKOH/g), hydroxyl values (27.1-67.5 mgKOH/g), and molar masses ($M_n=1.6-8.4kg\;mol^{-1}$) for the polyester and total base numbers (TBN) (15.3-57.1 mgKOH/g), hydroxyl values (33.0-79.8 mgKOH/g), and nitrogen contents (1.02-3.48%) for the polyester-polyamine polymers. We thus prepared thermal transfer ink using carbon blacks and the polyester-polyamine dispersing agents, and evaluated the resulting mixtures for printability, adhesive force, storage stability, ink appearance, ink gloss, and processability. These mixtures showed significant dispersibility for carbon black in the ink. Thus, we concluded that the dispersibility of the polymeric materials depended on the polyamine structure and the hydrophilicity-hydrophobicity distribution of the polymeric dispersants.