• 공업화학
• /
• 제26권6호
• /
• pp.674-680
• /
• 2015

리튬이차전지 실리콘 전극에 활용하기 위해, 유기용매에 용해성이 있는 폴리이미드(Polyimide, PI) 고분자 바인더를 두 단계 반응을 이용해 합성하였다. 두 가지 단량체(Bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetracarboxylic Dianhydride (BCDA)와 4,4-oxydianiline (ODA))의 개환 반응 및 축합 반응을 통해 PI 고분자 바인더를 합성하였다. 합성된 PI 고분자 바인더를 이용해 실리콘(silicon, Si) 음극 전극을 제조하였다. 또한 비교군으로써, Polyvinylidene Fluoride (PVDF)을 고분자 바인더로 사용하는 동일 조성을 가진 실리콘 전극을 제조하였다. PI 바인더를 사용한 Si 전극($2167mAh\;g^{-1}$)의 초기 쿨롱 효율은 기존 PVDF 바인더 조성의 Si 전극($1,740mAh\;g^{-1}$)과 유사했지만, 방전용량은 크게 개선되었다. 특히 수명 특성에서는 PI 바인더를 사용한 Si 전극이 우수한 특성을 나타내었는데, 이는 PI 바인더를 사용한 Si 전극접착력($0.217kN\;m^{-1}$)의 전극 접착력이 PVDF를 사용한 Si 전극($0.185kN\;m^{-1}$)보다 높아, 실리콘 부피팽창에 의한 전극 구조 열화가 적절히 제어되었기 때문이라고 판단된다. Si 전극 내의 접착력은 surface and interfacial cutting analysis system (SAICAS) 장비를 통해 검증하였다.

• 한국세라믹학회지
• /
• 제32권8호
• /
• pp.901-908
• /
• 1995

In aqueous slurry processing of silicon nitride, the interaction of dispersant and binder used as polymeric processing additives on the silicon nitride particle surface was studied to identify the effect of these processing polymeric additives on the ceramic powder processing. The adsoprtion isotherm study of anionic organic molecule as dispersant and nonionic organic molecules as binder of silicon nitricde was studied to investigate the effect of these processing organic additives on the physicochemical properties of silicon nitride particles. As anionic molecule adsorbed onto silicon nitrice surface, the IEP of silicon nitride shifted toward acidic pH and changed the stability of silicon nitride particle. However, the adsorption of binder as nonionic organic molecule onto silicon nitride surface did not changed the IEP but caused the decrease of electrostatic potentials of silicon nitride. These distinctive adsorption behaviors of organic additives on silicon nitride particles can be closely correlated to the stability of silicon nitride particles suspended in aqueous media.

• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.433-442
• /
• 2021

이 연구에서는 폴리머 결합재(불포화 폴리에스터 수지), 플라이 애시, 그리고 순환굵은골재(60%)와 부순굵은골재(40%)를 사용하여 폴리머 결합재 함량의 변화에 따른 무세골재 폴리머 콘크리트의 성질(9개항)에 대하여 연구하였다. 폴리머 결합재 함량(4.0-6.0wt.%)을 실험 변수로 한 이유는 비용측면에서 가장 큰 비중을 차지할 뿐만 아니라 각종 성능에 미치는 영향이 크기 때문이다. 연구결과 밀도, 압축강도, 휨강도, 동결융해 후 휨강도는 폴리머 결합재 함량이 증가함에 따라 증가하였고, 흡수율, 공극률, 연속공극률, 투수계수, 내산성(산에 의한 밀도 감소율)은 폴리머 결합재 함량이 증가함에 따라 감소하였다. 특히 폴리머 결합재 함량 6wt.%에서는 공극률이 18.4%, 투수계수가 7.3mm/sec 임에도 압축강도는 38.0MPa, 휨강도는 10.0MPa로서 기존의 연구결과들에 비해 월등히 높고, 흡수율, 내산성 등 다른 성질들도 우수한 것으로 나타났다. 이러한 결과는 가교제의 첨가에 의해 높아진 결합재의 부착력과 폴리머 결합재가 가진 표면 소수성에 기인하는 것이라고 하겠다.

• Advances in concrete construction
• /
• 제5권6호
• /
• pp.587-611
• /
• 2017

This study focused on the influences regarding the use of polyepoxide-based polymer and silica fume (SF) on the fresh and hardened state properties of self-compacting lightweight concrete (SCLC) along with their impacts on electrical resistance and ultrasonic pulse velocity (UPV). To do so, two series of compositions each of which consists of twelve mixes, with water to binder (W/B) ratios of 0.35 and 0.4 were cast. Three different silica fume/binder ratios of 0, 5%, and 10% were considered along with four different polymer/binder ratios of 0, 5%, 10%, and 15%. Afterwards, the rupture modulus, tensile strength, 14-day, 28-day, and 90-day compressive strength, the UPV and the electrical resistance of the mixes were tested. The results indicated that although the use of polymer could enhance the passing and filling abilities, it could lead to a decrease of segregation resistance. In addition, the interaction of the SF and the polymeric contents enhanced the workability. However, the impacts regarding the use of polymeric contents on fresh state properties of SCLC were more prevalent than those regarding the use of SF. Besides the fresh state properties, the durability and mechanical properties of the mixes were affected due to the use of polymeric and SF contents. In other words, the use of the SF and the polymer enhanced the durability and mechanical properties of SCLC specimens.

• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1821-1826
• /
• 2009

Liquid crystal display (LCD) devices contain a colour filter which can visualise colour images by transmitting or absorbing light. Colour properties of LCD mainly depend on colour materials such as pigments and polymeric binders. In this paper, colour properties were studied to improve colour quality of LCD. Generally, the colour properties can be classified into three categories which are colour purity, brightness and contrast ratio. For this study, photo resists were prepared by treatment of pigments and synthesis of polymeric binder. The treated pigments were dispersed and formulated with additives for preparing a photo resist that could be used for manufacturing colour filters. As a result of what we studied, type, mixture ratio and concentration of pigments were very important to improve colour purity of LCD device.

• 산업기술연구
• /
• 제43권1호
• /
• pp.43-48
• /
• 2023

Spinel LiNi_0.5Mn_1.5O₄ (LNMO) has been considered as one of most promising cathode material, because of its low-cost and competitive energy density. However, 4.7V vs. Li/Li⁺ of high operating potential facilitates electrolyte degradation on cathode-electrolyte interface during charge-discharge process. In particular, commercial polyvinylidene fluoride (PVDF) is not sutaible for LNMO cathode binder because its weak van der waals force induces thick and non-uniform coverage on the cathode surface. In this review, we study high performance binders for LNMO cathode, which forms uniform coating layer to prevent direct contact between electrolyte and LNMO particle as well as modifying high quality cathode electrolyte interphase, improved cell performace.

• 폴리머
• /
• 제30권6호
• /
• pp.550-555
• /
• 2006

잉크젯프린터용 잉크가 수성화되어 감에 따라 전용 인화지에 사용되는 코팅제 역시 수성 코팅제가 사용되고 있는 추세이다. 이 수성 코팅제에 사용되는 재료를 살펴보면 안료로는 알루미나솔, 주 바인더로 폴리 (비닐 알콜), 부족한 물성을 향상시키기 위해 고분자 첨가제를 사용한다. 된 연구에서 사용된 고분자 첨가제는 스티렌과 부틸아크릴레이트를 기본으로 하구 메타크릴산, 아크릴산, 아크릴 아미드 단량체들을 조합하여 에멀션 중합법으로 합성하였다. 중합시 비이온 및 음이온 유화제를 혼합 혹은 단독으로 사용하고, 단량체 조합과 고분자 첨가제의 입자구조를 변화시켜 흡수성, 퍼짐성, 광학밀도의 인쇄적성과 광택도 내수성 등의 변화를 살펴보았다. 이 결과, 음이온 유화제나 카복실기를 가지는 아크릴산 같이 음이온성이 큰 물질을 사용한 경우 알루미나 솔과의 상용성에서 문제를 야기하였고 아크릴 아미드는 인쇄적성에서 뛰어난 결과를 얻었지만 광택도가 떨어지는 경향을 알 수 있었다. 메타크릴산이 함유된 경우 광택도는 향상되었지만 인쇄적성이 떨어졌다.

• Journal of Electrochemical Science and Technology
• /
• 제6권2호
• /
• pp.35-49
• /
• 2015

Advanced polymeric binders with unique functions such as improvements in the electronic conduction network, mechanical adhesion, and mechanical durability during cycling have recently gained an increasing amount of attention as a promising means of creating high-performance silicon (Si) anodes in lithium-ion batteries with high energy density levels. In this review, we describe the key challenges of Si anodes, particularly highlighting the recent progress in the area of polymeric binders for Si anodes in cells.

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.72-78
• /
• 1998

In this work, the effects of binder materials on the tribological behavior were experimentally evaluated for air curable MoS$_2$bonded film lubricants. The binders tested were basically alkyd and acryl based resins, and also were modified by nitro-cellulose in various weight percentages. Effects on the binder ratio to solid lubricants and the molecular weight of binders were also investigated in all aspects of the tribological behavior. For the tests, LFW-1 and Falex tester were used to measure mainly the endurance life and load carrying capacity of bonded lubricants. Results showed that lubricants of methacrylic resin has the better performance than those of other resins, and also the properties of lubricants both of alkyd and acrylic resins could be improved by modification with nitro-cellulose. It was also shown that the optimum ratio of nitro-cellulose related closely to the binder material and the testing machine.

• 전기화학회지
• /
• 제10권4호
• /
• pp.295-300
• /
• 2007

A new characterization method using a porous plug model was proposed to determine the degree of sulfonation (DS) of ionomer binder with respect to the membrane used in membrane-electrode assemblies (MEAs) and to analyze the fraction of proton pathways through ionomer-catalyst combined electrodes in MEAs for polymer electrolyte fuel cells (PEFCs). Sulfonated poly(ether ether ketone) was prepared to use a polymeric electrolyte and laboratory-made SPEEK solution (5wt.%, DMAc based) was added to catalyst slurry to form catalyst layers. In case of the SPEEK-based MEAs in this study, DS of ionomer binder for catalyst layers should be the same or higher than that of the SPEEK membrane used in the MEAs. The porous plug model suggested that most of protons were via the ionomer binder (${\sim}92.5%$) bridging the catalyst surface to the polymeric electrolyte, compared with the pathways through the alternative between the interstitial water on the surface of ionomer binder or catalyst and the ionomer binder (${\sim}7.3%$) and through only the interstitial water on the surface of ionomer or catalyst (${\sim}0.2%$) in the electrode of the MEA comprising of the sulfonated poly(ether ether ketone) membrane and the 5wt.% SPEEK ionomer binder. As a result, it was believed that the majority of proton at both electrodeds moves through ionomer binder until reaching to electrolyte membrane. The porous plug model of the electrodes of MEAs reemphasized the importance of well-optimized structure of ionomer binder and catalyst for fuel cells.