• 한국광학회지
• /
• 제14권1호
• /
• pp.33-37
• /
• 2003

트렌치 구조를 이용한 저전력 1$\times$2 폴리머 열 광학 스위치를 제안하고 제작하였다. 최적의 위치에 적절히 형성된 트렌치 구조는 전극으로부터 발생한 열 흐름을 방해하여 전력 소보를 줄이는데 기여할 수 있다 광 도파로를 구성하는 폴리머 층에서의 온도 분포가 변하여 Y-분기를 이루는 두 도파로들 사이의 온도 기울기가 급격하게 증가하기 때문이다. 본 실험에서는 트렌치 구조의 효과를 비교 분석하기 위해 트렌치 구조가 없는 1$\times$2 폴리머 열 광학 스위치도 동일한 기판 위에 함께 제작하였다. 트렌치 구조를 이용한 열 광학 스위치의 경우, 측정된 누화는 TE 편광에서 -17.0 dB 이하. TM 편광에서 -15.0 dB 이하였다 전력 소모는 트렌치 구조가 없는 열 광학 스위치의 소모 전력보다 25% 감소한 약 66 ㎽였다.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.997-1006
• /
• 2003

LICA technique evolved as a basic fabrication process fur micro-structure. The present report deals with the basic technological features in the sequence of the LIGA technique such as deep x-ray lithography(DXRL), electroplating, and moulding processes at Pohang Light Source (PLS). We designed 3-D structured master for fabrication of polymeric optical wavegude and manufactured polymeric optical wavegude with the same using hot embossing process. Polymeric optical waveguide could be produced with ${\pm}$ 1 $\mu\textrm{m}$ accuracy and good surface roughness.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2005년도 제16회 정기총회 및 동계학술발표회
• /
• pp.292-295
• /
• 2005

Variable optical attenuators (VOA) made of low-loss fluorinated polymers are demonstrated which shows a low operating power less than 30 mW due to the superior thermo-optic effect of polymer material and a low insertion loss less than 1.0 dB by incorporating highly fluorinated polymers to reduce the absorption loss at 1550 nm. An attenuator-integrated low-crosstalk polymeric digital optical switch (DOS) is also demonstrated. The switch and attenuator shares a single connected electrode which is controlled by a single current source. Due to the simple structure of the integrated attenuator, the device length is reduced to 1 cm so as to provide low insertion loss of 0.8 and 1.1 dB for 1300 and 1550 nm, respectively. The attenuator radiates remained optical signal on the switch-off branch in order to decrease the switching crosstalk to be less than -70 dB with an applied electrical power of 200 mW.

• The Korean Journal of Ceramics
• /
• 제5권1호
• /
• pp.55-72
• /
• 1999

A cheallenge in the aerospace field is to design new composites satisfying specific and sometimes conflicting properties. The key steps are ⅰ)the understanding and the control of the reaction between the reinforcement and the embedding matrix, ⅱ) the achievement of a coherent and robust matrix. The problems encountered to prepare particulate, 1D, 2D and 3D reinforced composites using polymeric are discussed. Emphasis is given to the control of the micro/nanostructure using Raman microspectrometry and depth-sensing microindentation, in order to get information on the micromechanics and fiber structure simultaneously, within ceramic (CMC's) and metal matrix (MMC's) composites.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2193-2199
• /
• 2012

A series of novel polytriazoleimides were prepared from various aromatic dianhydrides and a new kind of 1,2,3-triazole-containing aromatic diamine synthesized by the Cu (I)-catalyzed 1,3-dipolar cycloaddition reaction in DMAc, and characterized by FT-IR, $^1H$-NMR, XRD, DSC and TGA techniques. The results show the polytriazoleimides are soluble in most of strong polar solvents and have inherent viscosity values of 0.51-0.62 dL/g(DMAc). The polytriazoleimide films exhibit a tensile strength of 62.3-104.5 MPa and an elongation at breakage of 4.0-8.1%, a glass transition temperature ($T_g$) of $257-275^{\circ}C$, a decomposition temperature (at 5% weight loss) of $350-401^{\circ}C$ in $N_2$ atmosphere, and a dielectric constant of 2.47-3.01 at 10 MHz, which depend on the structure of the polymers. The polytriazoleimides perform good resistance to acid and alkali solution.

• 폴리머
• /
• 제25권2호
• /
• pp.151-160
• /
• 2001

결정성 약제가 함침된 생분해성 고분자학이 고분자(poly(d,1-lactide)), 약제(progesterone) 및 용매(dimethylformamide)로 이루어진 고분자용액을 고형화시켜 제조되었다. 용매에 약제 및 고분자를 용해시켜 준비된 제막용액을 유리판 위에 도포한 후, 이로부터 용매를 증발시켜 고형화시키거나, 또는 고분자 및 함침 약제 모두에 비용매로 작용하는 물과 용액 필름에 존재하는 용매를 교환시켜 용액 필름이 응고되도록 하였다. 제조된 고분자막들은 용액 필름의 응고화 경로에 따라 뚜렷하게 다른 형상을 보여주었다. 진공 상태에서 용매의 증발을 통해 응고화되었을 때, 함침 약제인 프로제스테론은 구의 형상을 보여주며 고형화된 고분자 구조에 둘러싸여 막의 내부에 균일하게 분포되었다. 이에 비해, 비용매인 물에 침지시켜 용매와 비용매의 급속한 확산에 의해 응고화시키거나, 대기에 방치시켜 대기에 존재하는 수증기의 흡수에 의해 고분자 희박 지역의 핵 형성을 통한 용액 필름의 액체-액체 상분리를 유도하며 응고화시킨 경우, 함침된 약제는 고분자막 내부에 편상의 결정 구조를 지니며 막 내부에 불균일하게 분포되었다.

• 대한화학회지
• /
• 제60권5호
• /
• pp.321-326
• /
• 2016

Two new polymeric complexes, [Zn(dpa)(pyz)_0.5]_n (1; dpa = diphenate and pyz = pyrazine) and [Mn₃(bpdc)₃(py)₄]_n (2; bpdc = biphenyl-4,4'-dicarboxylate and py = pyridine) were successfully isolated by the hydro- and solvo-thermal technique, respectively. The complexes were characterized by elemental and thermal analysis, vibrational IR spectroscopy, and by single crystal x-ray structure determination. For 2, magnetic property was also investigated. Complex 1 is a two-dimensional layer structure consisting of a paddle-wheel building unit of Zn-dpa chains bridged by pyrazine. While, complex 2 consists of linear trimeric Mn3 cluster as building unit to form 3D network. In the complexes, dpa²⁻ (1) and bpdc²⁻(2) ligands show a typical bis-monodendate bridging and two kinds of bridging modes; a typical bridging and chelating/bridging mode, respectively.

• 분석과학
• /
• 제14권6호
• /
• pp.535-539
• /
• 2001

One-dimensional coordination polymer of cadmium(II) complex, $[Cd(SCN)_2(C_4H_6N_2]_n$, has been prepared and characterized by X-ray single crystallography. Structure analysis reveals that each cadmium(II) atom is six-coordinated in distorted octahedral fashion with $CdS_2N_4$ composition. $CdS_2N_4$ composition contains two S and two N atoms from four thiocyanates and tow N atoms from two 4-methylimidazole ligands. Central cadmium(II) atoms are run in parallel to the a-axis and are doubly bridged with neighboring cadmium(II) atoms by the thiocyanate and isothiocyanate ligands. Thus, this complex has a one-dimensional polymer structure in which the 4-methylimidazole is in the trans conformation.

• 전자공학회논문지D
• /
• 제34D권4호
• /
• pp.73-78
• /
• 1997

A polymeric waveguide TE-pass polarier operating at wavelengths around 1.55.mu.m is realized by utilizing the birefringence induced by photoleaching at room temperature. To implement the polarizer, the photobleached waveguide supporting only TE mode is integrated in the middle of the etched rib waveguide that supports TE and TM modes. It has a simple structure and requires no high temperature process like poling. The measured polarization extinction ratio is about 21dB and the estimted excess loss is about 0.4dB.

• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2489-2493
• /
• 2012

A new fluorescent system (acridine/RTIL hybrid gel) confined in the 3D micro-structure of a poly(lactic acid) membrane were prepared from 1-butyl-3-methylimidazolium-based ionic liquids ([bmim]X (X = $SbF_6$, $NTf_2$, Cl); RTILs), poly(lactic acid) (PLA), and acridine via the sol-gel route. SEM images showed that, in the presence of [bmim]$SbF_6$ and [bmim]$NTf_2$, 3D-ly paticulated structures were created inside the PLA membranes and acridine/RTIL hybrid gels were confined in gabs of particulates. However, the use of [bmim]Cl induced the formation of a 3D-ly porous structure containing the hybrid gel of acridine/[bmimCl in the micropores. The three fluorescent systems exhibited different fluorescence behaviors (fluorescence maximum and intensity) depending on the C2-H acidity scale of the RTILs (or their anion type). Acridine gels hybridized with [bmim]$SbF_6$ and [bmim]$NTf_2$ showed blue fluorescence with relative high intensity, whereas the hybrid gel with [bmim]Cl exhibited almost no fluorescence under dry conditions. However, the acridine/[bmim]Cl hybrid system in the micro-porous PLA membrane started to emit fluorescent light under humid conditions and showed a possible response, indicating that it could be applied as a humidity sensor.