• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.288-288
• /
• 1996

The microcapsules containing ethanol in a water-soluble polymer shell could be formed by the spray-drying technique. A mixed solution of ethanol, water and a water-soluble polymer is spray-dried at the lowest possible temperature to obtain a powder product in which the water is substantially removed and the ethanol is encapsulated in water-soluble polymer shell because of the hydrophillic property of polymer and permeability difference between ethanol and water. In this study, the effect of sodium lauryl sulfate (SLS) on the ethanol content, ethanol encapsulation efficiency and yield were investigated to maximize the microencapsulation of ethanol.

• Polymer Science and Technology
• /
• v.24 no.5
• /
• pp.488-500
• /
• 2013

• KSBB Journal
• /
• v.26 no.4
• /
• pp.333-340
• /
• 2011

In this study, gemcitabine-loaded methoxy poly(ethylene glycol)-b-poly(L-lactide) (MPEG-PLLA) microparticles with different PEG block lengths were prepared by a W/O/W double emulsion technique. The present study focuses on the investigation of the influence of various preparative parameters such as the ratio of internal water phase and oil phase, polymer concentration, solvent composition of organic phase and salt concentration of external water phase on the morphology and encapsulation efficiency of the microparticles. The microparticles fabricated at high volume ratios of internal water phase to oil phase and at high polymer concentrations showed a relatively high encapsulation efficiency and low porosity. When a dichloromethane/ethyl acetate mixture was used as solvent, both the encapsulation efficiency and drug loading of the microparticles decreased as the level of ethyl acetate increased. The addition of a salt (NaCl) to the external water phase significantly improved the encapsulation efficiency up to 40%, and the microparticles became more spherical with their size and porosity decreased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.991-994
• /
• 2003

Electronic Paper용 무기소재로 $TiO_2$ 나노입자를 적용하기 위해서는 분산시 침전문제, 입자의 전기영동 속도향상을 위한 충분한 $\xi-potential$확보, 분산제 첨가시 안정적 결합을 위한 acidic site의 확보등의 문제가 해결되어야 한다. 이를 위해 저온균일침전법으로 $TiO_2$ 나노입자를 제조하였고, 폴리머 체인을 통하여 encapsulation하여 최적의 분산과 전기영동조건 확보를 위한 공정조건에 대해 연구하였다. 실험결과 다양한 분산매에 계면활성제를 1.0wt% 첨가시 유전율상수가 2.5인 분산매에서 가장 좋은 $\xi-potential$을 얻을 수 있었으며 이를 바탕으로 acidic site에 따른 폴리머 체인의 흡착실험 결과 pH $1{\sim}2$의 조건에서 제조된 $TiO_2$ 나노입자의 경우가 체인과의 흡착정도가 가장 좋아 분산특성을 향상시킬 수 있었다.

• Macromolecular Research
• /
• v.13 no.3
• /
• pp.223-228
• /
• 2005

In the present work, a low-density polyethylene (LDPE) composite, filled with Zn-ion coated structural silica encapsulated with the diglycidyl ether of bisphenol-A (DGEBA), was synthesized using the conventional melt-blending technique in a sigma internal mixer. The catalytic activity of the Zn-ions (originating from the structural silica) towards the oxirane group (diglycidyl ether of bisphenol-A (DGEBA): encapsulating agent) was assessed by infrared spectroscopy. Two composites, each with a filler content of $2.5 wt\%$ were developed. The first one was obtained by melt blending the Zn-ion coated structural silica with LDPE in a co-rotating sigma internal mixer. The second one was obtained by melt blending the same LDPE, but with DGEBA encapsulated Zn-ion coated structural silica. Epoxy resin encapsulation of the Zn-ion coated structural silica resulted in its having good interfacial adhesion and a homogeneous dispersion in the polymer matrix. Furthermore, the encapsulation of epoxy resin over the Zn-ion coated structural silica showed improvements in both the mechanical and thermal properties, viz. a $33\%$ increase in the elastic modulus and a rise in the onset degradation temperature from 355 to $371^{\circ}C$, in comparison to the Zn-ion coated structural silica.

• Archives of Pharmacal Research
• /
• v.27 no.1
• /
• pp.1-12
• /
• 2004

Initial burst is one of the major challenges in protein-encapsulated microparticle systems. Since protein release during the initial stage depends mostly on the diffusional escape of the protein, major approaches to prevent the initial burst have focused on efficient encapsulation of the protein within the microparticles. For this reason, control of encapsulation efficiency and the extent of initial burst are based on common formulation parameters. The present article provides a literature review of the formulation parameters that are known to influence the two properties in the emulsion-solvent evaporation/extraction method. Physical and chemical properties of encapsulating polymers, solvent systems, polymer-drug interactions, and properties of the continuous phase are some of the influential variables. Most parameters affect encapsulation efficiency and initial burst by modifying solidification rate of the dispersed phase. In order to prevent many unfavorable events such as pore formation, drug loss, and drug migration that occur while the dispersed phase is in the semi-solid state, it is important to understand and optimize these variables.

• Journal of the Korean Society of Visualization
• /
• v.9 no.2
• /
• pp.16-20
• /
• 2011

This paper presents a fabrication method of microcapsules encapsulating fluorescent nanoparticles sensitive to an organic liquid, which is potentially applicable to the encapsulation of protein, cell and drug. It uses the supra-molecular self-assembly of a block copolymer at the interface of the stable and controllable droplets of water suspended with fluorescent nanoparticles and the polymer solved organic. The size and uniformity of the microcapsules were examined for the various polymer concentrations by using SEM image analysis. The maximum standard deviation of the produced microcapsules of less than 3.5% was obtained from the microcapsules produced from the same conditions. The inclusion of fluorescent nanoparticles was visualized in the fluorescence microscope and by using TEM image. It is shown that this fabrication method can provide the uniform size microcapsules with a higher inclusion.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.8
• /
• pp.758-763
• /
• 2006

We has been studied the thin film encapsulation effect for organic light-emitting diodes (OLED). To evaluate the passivation properties of the passivation layer materials, we have carried out the fabrication of green light emitting diodes with ultra violet(UV) light absorbing polymer resin, $SiO_2,\;and\;SiN_x$, respectively. From the measurement results of shrinkage properties according to the exposure time to the atmosphere, we found that $SiN_x$ thin film is the best material for passivation layer. We have investigated the emission efficiency and life time of OLED device using the package structure of $OLED/SiN_x/polymer$ resin/Al/polymer resin. The emission efficiency of this OLED device was 13 lm/W and life time was about 2,000 hours, which reach 95 % of the performance for the OLED encapsulated with metal.

• Macromolecular Research
• /
• v.17 no.12
• /
• pp.956-962
• /
• 2009

We investigated the effect of two nonlamellar-prone lipids, phosphatidylethanolamine (PE) and dioleoylglycerol (DOG), on the efficiency of protein encapsulation in liposomes. When the phosphatidylcholine (PC) matrix was replaced with PE or DOG during liposome formulation, the amounts of glutathione S-transferase and bovine serum albumin entrapped in the vesicles increased with increasing PE or DOG concentration. The presence of PE and DOG synergistically affected protein entrapment. These results suggest that protein encapsulation can be enhanced by the presence of nonlamellar lipids and/or lipid-induced membrane properties.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.2
• /
• pp.121-127
• /
• 2003

The objective of this study was to solidify the simvastatin self-microemulsifying drug delivery system (SMEDDS) and to improve the encapsulation efficiency of solidified alginate beads using sodium alginate. Typical simvastatin SMEDDS was composed of various oils, surfactants and cosurfactants. Also solidified-alginate beads was prepared by crosslinking liquid emulsion mixtures containing sodium alginate and other excipients (cetylpyridinum chloride (CP-Cl), hydroxypropyl methylcellulose, starch and so on). in $CaCl_2$ solution, it has been investigated that the drug release pattern and encapsulation efficiency were varied with the ratio of cationic lipid (CP-Cl). Solidified sodium alginate beads containing simvastatin SMEDDS were redispersed into media without re-aggregation. Oil droplet size of redispersed solidified-beads in media produced smaller than the initial size. The density of beads and drug loading amount were increased with increasing cationic lipid content. These systems have advantages of storage stability and predictability of drug release rate.