• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 봄 학술발표회 논문집
• /
• pp.54-57
• /
• 1998

Recently, Manley's group published several papers on the blend of PVDF and poly(1, 4-butylene adipate) (PBA) chosen as a model system of somicrystallineisemicrystalline polymer blend.[1-4]. This blend system has several advantages over the other PVDF/semicrystalline polymer blends.(omitted)

• Carbon letters
• /
• 제12권2호
• /
• pp.85-89
• /
• 2011

Coloured wastewater is released as a direct result of the production of dyes as well as from various other chemical industries. Many dyes and their breakdown products may be toxic for living organisms. Activated carbon is one of the best materials for removal of dyes from aqueous solutions. The present study describes the adsorption behaviour of methylene blue dye on three microporous activated carbons, where two samples (AC-1 and AC-2) were prepared by a polymer blend technique and the other is a microporous activated carbon (ARY-3) sample from viscose rayon yarn prepared by chemical-physical activation. The effects of contact time and activated carbon dosage on decolourisation capacity have been studied. The results show that activated carbon having mixed microporosity and mesoporosity show tremendous decolourisation capacity for methylene blue. In addition, the activated carbon in the powder form prepared by the polymer blend technique shows better decolourisation capacity for methylene blue than the activated rayon yarn sample.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.391-394
• /
• 2000

EPDM/silicone blend was prepared with polyorganosiloxane compatibilizer for out-door polymer insulation used to shed. Each blend had various weight ratios, 100/0, 90/10, 70/30, 50/50, 30/70, 10/90, and 0/100 as EPDM to silicone, and electrical and tracking characteristics were studied with the method of IEC 60587. And also, tracking properties and contact angle related to UV-weathering period were studied to understand the degree of degradation of blend after 1000 h UV-weathering.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2007년도 학술발표회 논문집
• /
• pp.257-258
• /
• 2007

See Full Text

• 한국환경과학회지
• /
• 제24권8호
• /
• pp.1037-1043
• /
• 2015

Since single-use disposable plastic usage has steadily been increasing, recent trends in polymeric research point to increasing demand for eco-friend materials which reduce plastic waste. A huge amount of non-degradable polypropylene (PP)-based pots for seedling culture are discarded for transplantation. The purpose of this study is to investigate an eco-friendly biodegradable material as a possible substitute for PP pot. The blend of poly(lactic acid) (PLA) with poly(butylene adipate-co-terephthalate) (PBAT) was used because of its good mechanical and flexible properties as well as biodegradation. After landfill, various properties of the blend pot were investigated by UTM, SEM, NMR and TGA. The results showed the tensile strength of the blend film rapidly decreased after 5 weeks of landfill due to degradation. From NMR data after landfill, the composition of PLA in the blend was decreased. These results indicate that the biodegradation of the blend preferentially occurs in PLA component. To investigate the effect of holes in pot bottom and side on root growth, a plant in the pot was grown. Some roots came out through holes as landfill period increases. These results indicate that the eco-friendly pot can be directly planted without the removal of pot.

• Macromolecular Research
• /
• 제9권5호
• /
• pp.285-291
• /
• 2001

The polysulfone(PSf)/polyethersulfone(PES) blend membranes were prepared by an immersion precipitation method. N-methyl-2-pyrrolidone(NMP) was used as a solvent and water as a nonsolvent. The composition of the coagulation bath and the dope polymer concentration as well as the blend ratio of two polymers were varied. The membrane morphologies were interpreted on the basis of the phase diagram of the PSf/PES/NMP/water system. As the solvent content in the coagulation bath increased in the single polymer system, the number of macrovoids decreased and the morphology was changed from finger-like to cellular structure. In the given bath condition phase separation occurs earlier for the solutions of PSf/PES blend than for those of single polymer. A horizontally layered structure and horizontal protuberances inside the macrovoid were observed for the membranes formed from PSf/PES blend solutions. This peculiar structure formation can be interpreted by a PSf-rich/PES-rich phase separation followed by a polymer-rich/polymer-lean phase separation during the exchange of solvent and nonsolvent.

• Elastomers and Composites
• /
• 제54권1호
• /
• pp.54-60
• /
• 2019

The rapid development of the automobile industry is an important factor that led to the dramatic development of synthetic rubber. The tread part of tire that comes in direct contact with the road surface is related to the service life of the tire. Rubber compounds used in tire treads are often blended with SBR (styrene-butadiene rubber) and BR (butadiene rubber) to satisfy physical property requirements. However, when two or more kinds of rubber are blended, phase separation and silica dispersion problems may occur due to non-uniform mixing of the rubber. Therefore, in this study, we synthesized an SBR copolymer with the same composition as that of a typical SBR/BR blend compound by controlling butadiene content during ESBR (emulsion styrene-butadiene rubber) synthesis. Subsequently, silica filled compounds were manufactured using the synthesized ESBR, and their mechanical properties, dynamic viscoelasticity, and crosslinking density were compared with those of the SBR/BR blended compound. When the content of butadiene was increased in the silica filled compound, the cure rate accelerated due to an increased number of allylic positions, which typically exhibit higher reactivity. However, the T-2 compound with increased butadiene content by synthesis less likely to show an increase in crosslink density due to poor silica dispersion. In addition, the T-3 compound containing high cis BR content showed high crosslink density due to its monosulfide crosslinking structure. Because of the phase separation, SBR/BR blend compounds were easily broken and showed similar $M_{100%}$ and $M_{300%}$ values as those of other compounds despite their high crosslink density. However, the developed blend showed excellent abrasion resistance due to the high cis-1,4 butadiene content and low rolling resistance due to the high crosslink density.

• 공업화학
• /
• 제29권4호
• /
• pp.395-398
• /
• 2018

전기장 하에서 유기물은 전기장에 의해 부여된 여러 가지 힘의 영향을 받아서 특이한 거동을 나타낸다. 본 연구에서는, 지금까지 개별적으로 고찰되어 왔던 전기장 하에서의 블록 공중합체와 고분자 블렌드의 미세 거동을 비교 분석하여 특징적인 차이점을 알아보고자 한다. 두 가지 고분자가 공유결합으로 연결된 블록 공중합체와 약한 상호작용으로 혼합된 고분자 블렌드 시스템을 비교대상으로 하였다. 이때, 구성 고분자로는 비슷한 유전상수를 갖는 폴리아크릴로 나이트릴과 폴리메틸메타아크릴레이트를 도입하였다. 유사한 분자량, 같은 농도, 같은 전기장 세기하에서 고분자 블렌드가 전기장에 더욱 민감하게 반응하는 것을 알 수 있었다. 이는 공유결합이 분자의 운동성을 제약하여 전기장에 덜 민감하게 반응하도록 거동하기 때문이다. 본 연구는 고분자 물질의 전기장 하에서의 거동을 이해하는 중요한 정보를 제공할 것이다.

• 폴리머
• /
• 제36권5호
• /
• pp.617-621
• /
• 2012

폴리아스팔트아미드[${\alpha}$,${\beta}$-poly(2-hydroxyethyl-DL-aspartamides), PHEAs]는 폴리아미노산의 일종으로서 잠재적인 의학 및 약학분야에 응용가능한 생분해성 생체적합성 재료로 널리 연구되어 왔다. 본 연구에서는 PHEA와 폴리(비닐 피롤리돈)(PNVP)의 블렌드 및 semi-IPN 젤에 관하여 다루었다. 블렌드 필름은 용액 캐스팅법으로 제조되었다. 제조된 블렌드는 전 조성에서 투명하였으며 DSC를 통해 조성에 따라 단조롭게 변화하는 단일한 유리전이 온도가 관찰됨으로써 두 개 고분자가 서로 상용성이 있음을 확인하였다. 고분자간의 가능한 수소결합 상호작용을 FTIR을 이용하여 설명하였다. 한편, 일정 조성의 PHEA/PNVP 블렌드 용액을 핵사메틸렌디이소시아네이트(HMDI)를 가교제로 사용하여 semi-IPN 타입의 하이브리드 젤을 제조하고, 제조된 젤의 팽윤 물성과 모폴로지를 조사하였다.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.331-337
• /
• 2006

In the present study we investigated the relationship between the morphology and mechanical properties of electrospun polysulfone (PSF)/polyurethane (PU) blend nonwovens, by using the electrospinning process to prepare three types of electrospun nonwovens: PSF, PU and PSF/PU blends. The viscosity, conductivity and surface tension of the polymer solutions, were measured by rheometer, electrical conductivity meter and tensiometer, respectively. The electrospun PSF/PU blend nonwovens were characterized by scanning electron microscopy (SEM) and with a universal testing machine. The SEM results revealed that the electrospun PSF nonwoven had a structure consisting of cross-bonding between fibers, whereas the electrospun PU nonwoven showed a typical, point-bonding structure. In the electrospun PSF/PU blend nonwovens, the exact nature of the point-bonding structure depended on the PU contents. The mechanical properties of the electrospun PSF/PU blend nonwoven were affected by the structure or the morphology. With increasing PU content, the mechanical behaviors, such as Young's modulus, yield stress, tensile strength and strain, of the electrospun PSF/PU blend nonwovens were by up to 80%.