• Transactions on Electrical and Electronic Materials
• /
• 제9권2호
• /
• pp.79-83
• /
• 2008

The dampness by treating the surface with polyethylene terephthalate (PET) film was measured to grasp the plasma parameters and was observed the surface condition with an atomic force microscope (AFM) to find the causes of the dampness. Also, the vibrational and rotational temperatures in the plasma were calculated after identifying the radicals within the plasma by analyzing the emission spectral with an emission spectrum. The hydrophilic properties were enhanced, by treating the surface of the PET film with non-equilibrium atmospheric discharge plasma. When the rotational temperature was 0.22 to 0.31 eV within the plasma, surface modification control could be easily carried out to surface treatment of PET film on non-equilibrium atmospheric pressure plasma.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1419-1424
• /
• 2006

We could reduce the reflection from PET(polyethylene terephthalate) film surface by natural plasma etching which does not use etch masks. The plasma etched PET film showed lower reflectance and higher transmittance which is resulted by making subwavelength structure(SWS) on the film surface by the plasma etch rate difference between the amorphous and crystalline region in the surface of PET film.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권3호
• /
• pp.316-323
• /
• 1995

A vital step in magnetic tape manufacturing is the surface modification of polymer substrate prior to ink application. A critical element for good adhesion of magnetic ink on polymeric substrate is the ability to join ink in cost-effective manner. Corona discharging is one of the effective methods of modifying polymer surface to improve adhesion while maintaining the desirable properties of the film itself. Surface treatment by corona which is exposure of film surface to electron or ion bombardment, rather than mere exposure to active species, like atomic oxygen or ozone, can enhance adhesion by removing contaminant, electret, roughening surface, and/or introducing reactive chemical groups. Reactive neutrals, ions, electron and photons generated during the corona treatment interact simultaneously with polymers to alter surface chemical composition, wettability, and thus film adhesion. However, it is highly recommended that extensive chains scission be avoided because it can lead to side-effect by forming sticky matter, resulting in dropouts. This paper reviews principles of surface preparation of polymer substrate by corona discharging. In addition, the experimental section provides a description of parameter optimization on corona discharging treatment and its side-effect. Experimental results are discussed in terms of surface wetting as determined by contact angle measurements.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.224-227
• /
• 2002

In this paper, we have investigated the physical properties and electrical conduction properties of polyethylene terephthalate film due to temperature variation, and the measurement of volume resistivity used to highmegohm meter is measured from 1 to 10 minutes when the specimen applied the voltage accroding to the step voltage appling method. From FT-IR spectrum as an analysis of physical properties, the strong absorption in wavenumbers $1019[cm^{-1}]$, $1266[cm^{-1}]$ and $1752[cm^{-1}]$ observed by the C=O and benzene ring. From the analysis of DSC, the crystalline melting points of the specimen observed in the temperature $80[^{\circ}C]$ and $263[^{\circ}C]$, respectively.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1987년도 제2차학술발표초록집
• /
• pp.44-45
• /
• 1987

• 대한방사선치료학회:학술대회논문집
• /
• 대한방사선치료학회 2003년도 춘계학술대회
• /
• pp.16-17
• /
• 2003

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.179.1-179.1
• /
• 2015

Thickness-dependent electrical, structural, and optical properties of zinc oxide (ZnO) thin films on polyethylene terephthalate (PET) substrates were investigated in the very thin thickness range of 20 to 120 nm. A very unusual transition phenomenon, in which electrical resistance increases with an increase in film thickness, was observed. From structural and compositional analyses, this transition behavior was explained to arise from metallic Zn agglomerates dispersed in non-crystalline Zn-O matrix. It was unveiled that film thickness more than 80 nm is required for the development of hexagonal crystal structure of ZnO. ZnO films on PET substrates exhibited high optical transmittance and good mechanical flexibility in the thickness range. The results of this study would provide a valuable guideline for the design of ZnO thin films on organic substrates for practical applications.

• 한국전기전자재료학회논문지
• /
• 제30권11호
• /
• pp.693-698
• /
• 2017

In this study, the thermal degradation properties of polyethylene terephthalate film has been examined by the capacitance, Tan ${\delta}$, thermography, FTIR, and SEM results at temperatures of $90{\sim}170^{\circ}C$ and frequencies of 0.3~3,000 kHz. It was found that the capacitance decreased with increasing thermal imaging temperature, probably caused by weakening of chemical bond with increasing temperature. Tan ${\delta}$ decreased upon increasing temperature from $90^{\circ}C$ to $170^{\circ}C$, probably due to the molecular motion of COOH radical or OH radical. The FT-IR measurement reveals that no structural change of the material occurs upon thermal radiation. The SEM measurement shows that the material is stabilized by thermal decomposition with increasing temperature; however, excessive thermal degradation obstructs the stabilization of the material.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2006년도 추계학술발표대회 및 제11회 신소재 심포지엄
• /
• pp.26.2-26.2
• /
• 2006

• 생물환경조절학회지
• /
• 제17권3호
• /
• pp.226-230
• /
• 2008

혼합 싹채소의 MAP에 적합한 포장재를 선발하기 위해 알팔파, 브로콜리, 양배추, 무, 그리고 적무의 혼합 싹채소를 $50{\mu}m$ 두께의 low-density polyethylene 필름(PE 50), $50{\mu}m$ 두께의 polypropylene 필름(PP 50), $50{\mu}m$ 두께의 ceramic 필름(CE 50), $25{\mu}m$ 두께 ceramic 필름(CE 25), $10\sim13{\mu}m$ 두께의 polyethylene film(wrap), 그리고 통기구가 있는 polyethylene terephthalate 박스(box)로 포장하여 $8^{\circ}C$에서 저장 비교하였다. 저장 중 혼합 싹채소의 생체중은 7%의 감소를 보인 box처리구를 제외한 모든 처리구에서 2% 미만의 감소만을 보였다. 포장재 내부 대기는 필름 종류에 따라 차이를 보였다. CE 25는 산소와 이산화탄소 모두 5% 수준이었으나, PE 50과 CE 50은 이보다 높은 이산화탄소와 낮은 산소 농도를 보였는데, 이러한 대기 조성 변화가 이들 처리구에서 가장 이취가 가장 심했던 원인이라 생각된다. 저장 10일째 포장재 내 에틸렌 농도는 box가 가장 낮았고, 다음으로 PP 50, wrap, CE 25의 순서로 높았으며 외관상 품질이 저하가 가장 심하였던 PE 50과 CE 50에서 가장 높았다. 이상의 결과를 종합할 때, 1% 미만의 생체중 감소와 5% 수준의 이산화탄소와 산소 농도, 그리고 4ppm 이하의 에틸렌 농도를 보인 CE 25가 혼합 싹채소에 가장 적합한 포장재인 것으로 나타났다.