• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.190-198
• /
• 2018

We fabricated high transmission and high scattering poly(ethylene-co-vinyl acetate)(EVA) films embedding $SiO_2$ nanoparticles to improve outcoupling efficiency in organic display. The 800nm diameter $SiO_2$ nanoparticles aggregated and formed $1.56{\mu}m$ (with ${\pm}0.853{\mu}m$ standard deviation) diameter microparticles in EVA. The total transmission of scattering film was 83.3% on Polyethylene terephthalate(PET), which was higher than reference 82.8% PET substrate. The diffuse transmission and haze of the $SiO_2$ embedded EVA film were 76.1% and 91.4%, respectively. The optimized condition was 1:1 weight ratio of $SiO_2$ nanoparticles to EVA in Tetrahydrofuran(THF) solution. When the ratio of $SiO_2$ was larger than 1, the total transmission decreased by the increase in backscattering of light due to high scattering. With the optimized condition, we could succeed to fabricate a large scale film(35m in length) with a roll-to-roll process.

• Food Science and Preservation
• /
• v.11 no.2
• /
• pp.233-239
• /
• 2004

Anchovy soy sauce containing anchovy sauce was ripened in different vessels at 30$^{\circ}C$ for 4 months and measured in physical, chemical, microbiolgical and sensory quality attributes. The used vessels include glass, polypropylene (PP), polyethylene terephthalate (PET), stainless, and onggi (Korean earthenware) with 628 mL. Compared to the other vessels, onggi gave the highest moisture loss, maintained consistently higher microbial counts in total aerobic bacteria, lactic acid bacteria and yeasts, and attained high protease activity in the soy sauce product. Even with high moisture loss the onggi vessel did not produce the higher product salt content than the other vessels because there was salt diffusion outward through the container wall. All of these changes of the product in onggi resulted in lower pH, higher acidity and higher amounts of free amino acids and nucleotides after 4 month period, which was desirable for sensory quality.

• Journal of Sensor Science and Technology
• /
• v.30 no.4
• /
• pp.255-260
• /
• 2021

We studied electrochemical sensors using printed carbon nanotube (CNT) film on a polyethylene terephthalate (PET) substrate. Multiwalled CNT films were printed on a PET substrate to study its feasibility as hazardous and noxious substances (HNS) detection sensor. The printed CNT film (PCF) with a 50 ㎛ thickness exhibited a specific resistance of 230 ohm. To determine the optimum sensor structure, a resistance-type PCF sensor (R-type PCF sensor) and a conductive-type PCF sensor (C-type PCF sensor) were fabricated and compared using diluted NH₃ droplets with various concentrations. The response magnitude, response time, sensitivity, linearity, and limit of detection (LOD) were compared, and it was concluded that the C-type PCF sensor exhibited superior performance. By applying a C-Type PCF sensor, we confirmed the detection performance of 12 types of floating HNS and the response of the sensor with selectivity according to the degree of polarity.

• Fashion & Textile Research Journal
• /
• v.25 no.5
• /
• pp.651-660
• /
• 2023

This study aimed to research the local production of conductive composite yarn, a source material used in textile-type electrodes and circuits. The physical properties of an internationally available conductive composite yarn were analyzed. To manufacture the conductive composite yarn, we selected one type of conductive yarn with Ag-coated polyamide of 150d 1 ply, along with two types of polyethylene terephthalate (PET) with circular and triangular cross-sections, both with 150d 1 ply. The conductive composite yarn samples were manufactured at 250, 500, 750, and 1000 turns per meter (TPM). For both conductive composite yarn samples manufactured from two types of PET filaments, the twist contraction rate of the sample with a triangular cross-section was stable. Among the samples, the tensile strength of the sample manufactured at 750 TPM was the highest at approximately 4.1gf/d; the overall linear resistance was approximately 5.0 Ω/cm, which is within the target range. It was confirmed that the triangular cross-section sample manufactured with 750 TPM had a similar linear resistance value to the advanced product despite the increase in the number of twists. In future studies, we plan tomanufacture samples by varying the twist conditions to derive the optimal conductive yarn suitable for smartwear and smart textile manufacturing conditions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.1
• /
• pp.16-21
• /
• 2024

Using electrochromic devices (ECD), smart window films that can change the colors from tinted state into transparent state by applying an external voltage were manufactured. Polyethylene terephthalate (PET) film was used as a substrate instead of conventional glass, and ECD modules having a total thickness of about 50 ㎛ were manufactured by sequentially introducing an ITO/Ag/ITO electrode layer, a WO3/TIC2 organic discoloration layer, and a Nafion fluorine electrolyte layer. Through a series of sputtering, bar coating, and thermal compression processes, a large scale smart window with a horizontal and vertical length of more than 80 mm was manufactured. When DC 3.5 V was applied, the transmittance decreased from 54 % to 24 % and moreover the color change could be confirmed even with the naked eye. Reversible color change capability at low external voltage implies that external sunlight can be selectively blocked which is effective in terms of energy saving.

• Food Science and Preservation
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2012

The effect of the packing methods for enhancing the shelf life and improving the postharvest quality of the $tah$ $tasai$ Chinese cabbage baby leaf vegetable was studied during storage. Fresh baby leaf vegetables were packed in four commercial packaging types: (1) a non-perforated bag with a 0.03-mm oriented polypropylene (OPP) film; (2) a perforated bag with 1.0-mm-diameter holes on an OPP film; (3) a 0.40-mm polyethylene terephthalate (PET) container with a hinged lid; and (4) an expanded polystyrene (EPS) tray wrapped with a 0.02-mm polyvinyl chloride (PVC) film. The quality parameters, such as the weight loss, moisture content change, color difference, and appearance of the baby leaf vegetables were investigated. The baby leaf vegetables in the PET container and in the non-perforated OPP film bag showed relatively low weight loss, high moisture content, and good external appearance compared to those in the EPS tray and in the perforated OPP film bag during limited storage periods, at $16^{\circ}C$. The PET container also protected the baby leaf vegetables from physical damage. The study results will enable the selection of a better packaging system for extending the freshness and increasing the market ability of baby leaf vegetables.

• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.329-334
• /
• 2005

The use of Polymer Concrete (PC) is growing very rapidly in many structural and construction applications such as box culverts, hazardous waste containers, trench lines, floor drains and the repair and overlay of damaged cement concrete surfaces in pavements, bridges, etc. However, PC has a defect economically because resin which be used for binder is expensive. Therefore the latest research is being progressed to replace existing resin with new resin which can reduce the high cost. Here, Polymer concrete using the recycled PET(polyethylene terephthalate) has some merits such as decrease of environmental destruction, decrease of environmental pollution and development of new construction materials. The variables of this study are amount of resin, curing condition and maximum size of coarse aggregate to find out mechanic properties of this. Stress-strain curve was obtained using MTS equipment by strain control. The results indicated that modulus of elasticity was increased gradually in an ascending branch of curve, as an increase of resin content. Compressive strength was the highest for resin content of $13\%$. And Compressive strength was increased as maximum size of coarse aggregate increases. The strain at maximum stress increases with an increase of resin content and size of coarse aggregate. For the descending branch of stress-strain curve the brittle fracture was decreased when it was cured at the room temperature compared to high temperature.

• Composites Research
• /
• v.32 no.6
• /
• pp.382-387
• /
• 2019

A single frequency strain mode test, a stress relaxation mode test, and a creep test using RH-DMA were performed to investigate the effects of relative humidity and temperature on the viscous properties of PET film. The relative humidity was 10%, 30%, 50%, 70%, and 90%. The temperature was considered to be 30~95℃ for single frequency strain mode tests, 30℃ and 70℃ for stress relaxation mode test, and 5~95℃ for creep test. According to the results, higher relative humidity results in lower storage modulus and loss modulus, but the maximum value of the loss modulus is not significantly affected by changes in relative humidity and is almost constant. Relaxation modulus decreases rapidly at the beginning and becomes constant, and as the temperature increases, it is susceptible to changes in relative humidity. Strain recovery also increases rapidly at the beginning and is susceptible to changes in relative humidity as the temperature increases. In addition, as the temperature increases, the degree of increase in creep compliance increases, and as the temperature rises above the glass transfer temperature, the degree of increase becomes very large. The master curve determined by the time-temperature superposition provides the information to predict the long-term performance under operating conditions such as relative humidity and temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.91-91
• /
• 2010

본 논문은 펄스 직류전원 (Pulse DC) 플라즈마 소스와 반응성 가스인 $CF_4$와 불활성 가스인 Ar를 혼합하여 산업에서 널리 사용되는 유기고분자인 Polymethylmethacrylate (PMMA), Polyethylene terephthalate (PET), 그리고 Polycarbonate (PC) 샘플을 건식 식각한 결과에 대한 것이다. 각각의 샘플은 감광제 도포 후에 자외선을 조사하는 포토레지스트 방법으로 마스크를 만들었다. 펄스 직류전원 플라즈마 시스템을 사용하면 다양한 변수를 줄 수 있다는 장점이 있다. 공정 변수는 Pulse DC Voltage는 300 - 500 V, Pulse DC reverse time $0.5{\sim}2.0\;{\mu}s$, Pulse DC Frequency 100~250 kHz 이었다. 변수 각각의 값이 높아질수록 고분자의 식각률이 높아졌다. 특히, PMMA의 식각률이 가장 높았으며 PET, PC 순이었다. 샘플 중 PC의 식각률이 가장 낮은 이유는 고분자 결합 중에 이중결합의 벤젠 고리 모양을 포함하고 있어 분자 결합력이 비교적 높기 때문으로 사료된다. 기계적 펌프만을 사용한 공정 전 압력은 30 mTorr이었다. 쓰로틀 밸브를 완전 개방한 상태에서 식각 공정 중 진공 압력은 $CF_4$ 가스유량이 늘어날수록 증가하였다. 식각률 역시 $CF_4$ 가스유량(총 가스 유량은 10 sccm)이 많을수록 증가함을 보여주었다 (PMMA: 10 sccm $CF_4$에서 330 nm/min, 3.5 sccm $CF_4$/6.5 sccm Ar에서 260 nm/min., PET: 10 sccm $CF_4$에서 260 nm/min, 3.5 sccm $CF_4$/6.5 sccm Ar에서 210 nm., PC: 10 sccm $CF_4$에서 230 nm, 3.5 sccm $CF_4c$/6.5 sccm Ar에서 160 nm). 이는 펄스 직류전원 플라즈마 식각에서 $CF_4$와 Ar의 가스 혼합비를 조절함으로서 고분자 소재의 식각률을 적절히 변화시킬 수 있다는 것을 의미한다. 표면 거칠기는 실험 후 표면단차 측정기와 전자 현미경 등을 이용하여 식각한 샘플의 표면을 측정하여 알 수 있었다. 실험전 기준 샘플 표면 거칠기는 PMMA는 1.53nm, PET는 3.1nm, PC는 1.54nm 이었다. 식각된 샘플들의 표면 거칠기는 PMMA는 3.59~10.59 nm, PET은 5.13~11.32 nm, PC는 1.52~3.14 nm 범위였다. 광학 발광 분석기 (Optical emission spectroscopy)를 이용하여 식각 공정 중 플라즈마 발광특성을 분석한 결과, 탄소 원자 픽 (424.662 nm)과 아르곤 원자 픽 (751.465 nm, 763.510 nm)의 픽의 존재를 확인하였다. 이 때 탄소 픽은 $CF_4$ 가스에서 발생하였을 것으로 추측한다. 본 발표를 통해 펄스 직류전원 $CF_4$/Ar의 고분자 식각 결과에 대해 보고할 것이다.

• Food Science and Preservation
• /
• v.16 no.5
• /
• pp.699-704
• /
• 2009

Commercially produced 'baby leaves' of Brassica campestris var. narinosa (Chinese cabbage) were used in the present study. Baby leaf vegetables were sown on 128 cell plug trays and harvested 30 days after sowing. For mechanical stress experiments, seedlings were thinned to three per cell, selected for uniformity, and watered at the base. Trays were treated with mechanical stress by stroking back and forth 50 times, using a sheet of A4 paper folded to double thickness. Plants were treated between 12:00 and 14:00 daily for 15-20 days. Harvested baby leaf vegetables were packed in MAP salad bags made of P-plus film, $50{\mu}m$ polypropylene (PP) film, and polyethylene terephthalate (PET) boxes. Fresh weight was well-maintained under P-plus and PP film on storage at $8^{\circ}C$. However, loss of fresh weight occurred quickly in PET boxes, and vegetable quality deteriorated rapidly. Stressed leaves were smaller but thicker, with an increased dry weight ratio. We thus suggest that P-plus or PP film is most appropriate packing for marketing of baby leaf vegetables, which should be stored at $8^{\circ}C$. Our data on baby leaf vegetables also make a significant new contribution in that we demonstrate a positive effect of stress touching on baby leaf processability.