• Title/Summary/Keyword: polyethylene(PE)

Search Result 521, Processing Time 0.033 seconds

Effect of Different PE Mulching Duration on the Competition Ability of Sesame Growing in Association with Various Weed Communities (비닐피복기간(被覆期間)이 잡초군락형성(雜草群落形成)에 참깨의 경합력(競合力)에 미치는 영향(影響))

  • Lee, J.I.;Kang, C.W.;Kwon, Y.W.
    • Korean Journal of Weed Science
    • /
    • v.6 no.1
    • /
    • pp.33-41
    • /
    • 1986
  • This experiment was conducted to determine the influence of weed competition in sesame and the periods for weed control. Competition periods (days), for which sesame was seeded under transparent polyethylene film at May 15, were 10, 15, 30, 45, 60, 75, 90, and full growth season of sesame. Weed control periods (days), for which sesame was seeded under black polyethylene film at June 15, were 10, 15, 30, 45, 60, and full growth season of sesame. Dominant weeds were Ponulaca oleracea, Digitaria sanguinalis, Acalypha australis, L. Cyperus arnuricus, Arenaria aesrphllifolia, Cardamine flexucosa, Mollugo Stricta and Digitaria eschaemum. The number of weeds was maximum at the 30 days after planting. Broad leaf weeds were dominant than grass weeds, and then decreased the total number of weeds by the reason of major decrease of broad leaf weeds. However, the weight of weeds increased continuously. No weeds appeared until the 15 days after planting and the weight of broad leaf weeds was heavier than that of grass weeds until 45 days after planting. However, grass weeds were heavier than broad leaf weeds after 60 days after planting. The hazards of weeds on the growth and development appeared seriously from the 60 to 75 days after planting, but main yield reduction appeared from 30 days after planting. Therefore once more hand weeding should be practiced within 30 days after planting to minimize yield decrease. Serious hazards by weed growing appeared by removing black PE film after 15 to 30 days after planting in growth characteristics and 30 days later in grain yield. Leaf growth showed maximum from 45 to 60 days after planting and then decreased as compared with the continuous increase of stem and root in optimum planting, transparent PE film mulch and hand weeding. Leaf growth didn't show reducing in PE film mulch and weedy check but total weight of weeds increased and growth of sesame decreased as compared to PE film mulch and hand weeding. Leaf, stem and root growth of sesame, and weed weight under black PE film mulch showed same tendancy and lower growth of sesame as compared with optimum planting, transparent PE film mulch. Correlation between sesame yield and weeds weight were r =$ -0.874^{**}$ in the optimum planting and r = $-0.712^{**}$ in the late planting, so that the more weeds increase, the lesser sesame yield.

  • PDF

Yield and Seed Quality Changes According to Delayed Harvest with Rainfall Treatment in Soybean (Glycine max L.) (강우처리 및 수확 지연에 따른 콩 종실 특성 및 수량성 변화)

  • Lee, Inhye;Seo, Min-Jung;Park, Myoung Ryoul;Kim, Nam-Geol;Yi, Gibum;Lee, Yu-young;Kim, Mihyang;Lee, Byong Won;Yun, Hong-Tae
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.65 no.4
    • /
    • pp.353-364
    • /
    • 2020
  • Recently in Korea, soybean harvesting has been delayed due to rainfall during the harvesting season, resulting in a reduction in yield and seed quality. This study was conducted to analyze the changes in yield and seed quality during delayed harvest with rainfall treatment using different harvesting methods, including field harvesting and polyethylene film covering after cutting fully-matured soybean plants (PE covering after cutting), with two major Korean soybean cultivars (Glycine max L), Pungsannamulkong and Daewonkong. The shattering rate of Pungsannamulkong, which is higher than that of Daewonkong, increased up to 41.8% when the harvest was delayed for 40 days without rainfall treatment by harvesting with PE covering after cutting. The weight of 100 seeds tended to decrease slightly as harvesting was delayed. When Daewonkong was harvested using the PE covering after cutting method with rainfall treatment, the yield decreased to the lowest level with a 0.8 kg ha-1 daily reduction rate. Pungsannamulkong showed the lowest yield when harvested using PE covering after cutting without rainfall treatment with a 3.4 kg ha-1 daily reduction rate. The infected seed rate increased according to the harvest delay in both cultivars, and significant differences were observed according to rainfall treatment and harvesting method. The germination rate was maintained above 95% even after 40 days of delayed harvest if there was no rainfall treatment. However, with rainfall treatment, the germination rate was significantly lowered as harvesting time was delayed. In the field harvesting with rainfall treatment, the germination rate decreased to 77.2% for Daewonkong and 76.5% for Pungsannamulkong after 40 days of harvest delay. For the 100-seed weight, effects of individual treatments and interactions between treatments were not observed. In contrast, the effect of interactions between treatments on the shattering rate was significant in both cultivars, indicating that the shattering rate had the greatest impact on the yield changes during delayed harvest.

Production of Mother Bulbs with High Quality Using Bulbils of Garlic (Allium sativum L.) (마늘의 주아(珠芽)를 이용(利用)한 우양종구생산(優良種球生産))

  • Seo, Yeong-Bea;Kim, Dae-Kew;Sohn, Jae-Keun
    • Current Research on Agriculture and Life Sciences
    • /
    • v.17
    • /
    • pp.21-29
    • /
    • 1999
  • This study was carried out to determine the promising method for the production of mother bulbs using garlic bulbs at the experimental field of Ange high school, Eusung in Korea from 1996 to 1998. The bulbs and bulbils were taken from a local cultivar 'Eusung' garlic. The growth of bulbil and yield potential were compared with different harvesting times and cultivation methods of bulbil. The harvesting time of bulbils which were capable of producing the mother bulbs was ranged from 15 days to 30 days after the emergence of flower stalks. The best results based on the yield and number of bulbs were obtained from the bulbils sampled at the just before garlic harvesting, 30 days after flower-stalk emergence. The mulching with transparent polyethylene(PE) film in bulbil cultivation was more effective for the plant growth and bulb formation than that with black PE film. The PE mulching from 30 days after seeding of bulbils to 30 days (late-April) before bulb harvesting was the moot effective for the increase of bulb yield. In the cultivation of garlic bulbils, application of lime (150 kg/10a) and compost (3,000 kg/10a) without any chemical fertilizers produced more bulbs in comparison with the standard level of fertilizer (N - $P_2O_5$ - $K_2O$ - compost - lime = 24.8 - 8.0 - 19.2 - 3,000 - 150 kg/10a). It was determined that the involucre seeding and assemble seeding of bulbils was effective and labour-saving methods for the production of mother bulbs from garlic bulbils. Input of labour force for the involucre seeding was decreased up to 61% as compared with the conventional drill seeding of bulbils. Mean yield from the cultivation of bulbil-derived single cloves was remarkably increased up to 95% in comparison with that of the common cloves. The larger size of single clove produced more yields, and the optimum planting density of single clove was $20{\times}10cm$. The cloves differentiated directly from bulbil showed to have higher yield potential than that from common cloves.

  • PDF

Quality Changes in Oyster Mushrooms during Modified Atmosphere Storage as Affected by Temperatures and Packaging Materials (저장 온도와 포장재에 따른 느타리버섯의 MA 저장 중 품질변화)

  • Choi, Mi-Hee;Kim, Gun-Hee
    • Korean Journal of Food Science and Technology
    • /
    • v.35 no.6
    • /
    • pp.1079-1085
    • /
    • 2003
  • Modified atmosphere packaging was applied to oyster mushrooms (Pleurotus ostreatus) to study the effect of storage temperatures and packaging materialso. Whole mushrooms (200g) were package with polyethylene film $(PE,\;60{\mu}m\;thickness)$, ethylene vinyl acetate (EVA), or ceramic film (containing 5% zeolite) and stored at 0, 5, 10 and $20^{\circ}C$. Weight loss, color, firmness, gas composition $(O_2,\;CO_2)$ inside the film package and ethanol content in the tissue of MA packaged mushrooms were examined. Mushroom that were packed unwrapped in a conventional hardboard box (2 kg) lost marketability at a very early stage of storage due to weight loss, shrinkage, browning, and spore formation. During storage, film packaging prevented or retarded the deterioration of the mushrooms in the aspects of appearance, texture, and discoloration. Firmness slightly decreased with storage time. Total color difference was much higher in the control than in the film-packaged mushroom and rapidly increased at the early of storage. Correlation analysis showed a high correlation between total color difference and b values. These results were characterized by the reduced respiration rate resulting from elevated carbon dioxide and reduced oxygen levels in the package. At all storage temperatures, ethanol content in the tissue increased slightly at the early part of storage and rose considerably towards the end of the storage period. Ethanol content in the oyster mushrooms was higher in the stipe than in pileus tissues. The shelf life of the oyster mushrooms was about $8{\sim}11$ days at $0^{\circ}C$, about $4{\sim}6$ day at $5^{\circ}C$, about $2{\sim}3$ days at $10^{\circ}C$, and about $1{\sim}2$ days at $20^{\circ}C$.

Comparison of Thermal Insulation of Multi-Layer Thermal Screens for Greenhouse: Results of Hot-Box Test (온실용 다겹보온자재의 보온성 비교 -Hot box 시험 결과를 중심으로-)

  • Yun, Sung-Wook;Lee, Si-Young;Kang, Dong-Hyeon;Son, Jinkwan;Park, Min-Jung;Kim, Hee-Tae;Choi, Duk-Kyu
    • Journal of Bio-Environment Control
    • /
    • v.28 no.3
    • /
    • pp.255-264
    • /
    • 2019
  • In this study, we conducted the hot box tests to compare the changes in thermal insulation for the four types of multi-layer thermal screens by the used period after collecting them from the greenhouses in the field when they were replaced at the end of their usage. The main materials for these four types of multi-layer thermal screens were matt georgette, non-woven fabrics, polyethylene (PE) foam, chemical cotton, etc. These materials were differently combined for each multi-layer thermal screen. We built specimens ($70{\times}70cm$) for each of these multi-layer thermal screens and measured the temperature descending rate, heat transmission coefficient, and thermal resistance for each specimen through the hot box tests. With regard to the material combinations of multi-layer thermal screens, thermal insulation can be increased by applying a multi-layered PE foam. However, it is considered that the multi-layered PE foam significantly less contributes to heat-retaining than chemical wool that forms an air-insulating layer inside multi-layer thermal screens. For the suitable heat-retaining performance of multi-layer thermal screens, basically, materials with the function of forming an air-insulating layer such as chemical cotton should be contained in multi-layer thermal screens. The temperature descending rate, heat transmission coefficient, and thermal resistance of multi-layer thermal screens were appropriately measured through the hot box tests designed in this study. However, in this study, we took into consideration only the four kinds of multi-layer thermal screens due to difficulties in collecting used multi-layer thermal screens. This is the results obtained with relatively few examples and it is the limit of this study. In the future, more cases should be investigated and supplemented through related research.

Evaluation of Non-slip for Vehicle's Environmental Sub-Mat (자동차용 친환경적인 Sub-Mat의 Non-Slip기능 평가)

  • Eo, Yu-Rim;Kim, Ki-Tai;Kim, Joo-Yong;Kim, Young-Su
    • Science of Emotion and Sensibility
    • /
    • v.15 no.2
    • /
    • pp.177-182
    • /
    • 2012
  • Automotive sub-mat carpet for convenience and comfort of floor administration is additional supplemented floor mat. Sub Mat Backing of the current vehicle's materials reclaimed rubber, PVC, etc. are used, but secondary rubber and PVC Backing have bad sound absorption. Also rubber is heavy too. Contact surfaces between PET staple fiber, PET non-woven, PVC backing and car's floor carpet was measured the coefficient of friction for each sub-mat's non-slip evaluation. A surface of PET non-woven sub-mat has the highest coefficient of friction. Each of sample was observed by optical microscope the contact surfaces before and after. Contact surfaces of PET staple fiber sub-mat was changed increasingly to non-woven. This fact is shown that the sub-mat would be tangled between its contact surface and top of the floor carpet. It is expected to be highly non-slip. In case of PET non-woven sub-mat had not different for contact surfaces between before and after. And PVC backing was shown lower non-slip than other samples. The result of optical microscope and coefficient of friction is seems to be related.

  • PDF

Effect of Thickness of Polypropylene Spunbonded Fabrics on Growth Characteristics of Rice Seedlings (벼 상자육묘에서 부직포 두께가 묘소질에 미치는 영향)

  • Ko, Joon-Mo;Sohn, Jae-Keun
    • Current Research on Agriculture and Life Sciences
    • /
    • v.24
    • /
    • pp.23-27
    • /
    • 2006
  • Seedling characteristics of rice on nursery covered with different weight of polypropylene spunbonded fabric(PSF) were investigated to determine the optimum thickness of PSF for raising of healthy rice seedlings. Four different thickness of PSF 40, 60, 80 and $100g/m^2$ were used in the seedling nursery with a conventional polyethylene(PE) film. PSF and PE were taken off in 20 days after sowing(DAS) on April and in 10 DAS on June. Plant height of 20- and 30- day old seedlings in PSF covering nursery was slightly taller as the increase of PSF thickness from $40g/m^2$ to $100g/m^2$, but number of leaves and shoot dry-weight of the seedlings was reduced. Root solidity of seedlings grown in lighter PSF ($40{\sim}60g/m^2$) covering nursery was more favorable than that in relatively heavier PSF($80{\sim}100g/m^2$). The optimum thickness of PSF for the raising of healthy seedlings was $40{\sim}60g/m^2$ PSF at sowing on April 20 and April 30 for single cropping, and $40g/m^2$ PSF on June for double cropping based on the growth characteristics of seedlings investigated at seedling nursery covered with different thickness of PSF.

  • PDF

Modified Atmosphere Storage for Extending Shelf Life of Oyster Mushroom and Shiitake (환경가스조절 저장방법을 이용한 느타리버섯과 표고버섯의 유통기간 연장)

  • Han, Dae-Seok;Ahn, Byung-Hak;Shin, Hyun-Kyung
    • Korean Journal of Food Science and Technology
    • /
    • v.24 no.4
    • /
    • pp.376-381
    • /
    • 1992
  • In order to study the effect of modified atmosphere storage on extending shelf life of mushrooms, oyster mushroom and Shiitake were wrapped with polyethylene film (PE, $50\;{\mu}m$), and stored at $0.5^{\circ}C$. Mushrooms packed with conventional hardboard box (4kg) lost marketability within $5{\sim}6$ days due to weight loss, shrinkage, browning, spore formation and/or mycellium growth. PE-packing could prevent or retard the deterioration of the mushrooms in the aspects of appearance, texture, discoloration, and microbial contamination. This situation can be best characterized by the reduced respiration rate resulted from the elevated level of carbon dioxide and the reduced level of oxygen in the bag. Although the appearance of the oyster mushroom was maintained for one month, its shelf life was limited to 15 days because of tissue softening. Discoloration of the pileus of shiitake mushroom appears to be the most important factor to determine its marketability. For example, extension of shelf life of Dongo was limited to 15 days, principally due to the browning of the pileus. Shelf life of Hawgo whose color of the pileus changed little over the experimental period, however, could be extened to more than one month.

  • PDF

Changes in Quality by Drying Methods, Different Storage Conditions and Package Mediums for Established GAP Guide Book in Scutellaria baicalensis Georgi (황금 GAP 지침 설정을 위한 건조방법, 저장조건 및 포장재료에 따른 품질변화)

  • Kim, Myeong Seok;Kim, Kil Ja;Choi, Jin Gyung;Kwon, Oh Do;Park, Heung Gyu;Kim, Hyun Woo;Kim, Seong Il;Kim, Young Guk;Cha, Seon Woo;Shim, Jae Han
    • Korean Journal of Medicinal Crop Science
    • /
    • v.25 no.2
    • /
    • pp.89-94
    • /
    • 2017
  • Background: The purpose of improving the quality of oriental medicinal herbs is to contribute to the improvement of the income of farm. The present study investigated the effect of reasonable drying methods, different storage conditions and packageing materials on quality and stability of Scutellaria baicalensis Georgi and for developing GAP (good agricultural practice) guide book. Methods and Results: Three methods of drying Scutellaria baicalensis roots produced over two years were used to estimate loss rate owing to drying, storage, and packaging. The methods of drying were categorized into natural drying (36 - 60 h by sunshine), drying with heat dryer (2 - 10 h), or drying with gas bulk dryer (2 - 10 h). After cleaning, and initial drying for a few days under controlled temperature conditions, the second phase of drying was carried out at 35, 45 and $55^{\circ}C$. Changes in hunter color values and quality under the two studied storage treatments (at $20^{\circ}C$ indoors and at $4^{\circ}C$ in a refigerator) were evaluated. Storage period for 60, 120, and 180 days in three packaging materials, PE (polyethylene package), PP (polypropylene gunnysack), and WP (watertight packing paper) were studied. Conclusions: Initial cleaning, reasonable gas drying and hot air drying, and drying in an oven at 35 and $45^{\circ}C$ after cutting the roots resulted in the lowest loss rates in S. Baicalensis root. Hunter color valuse indicated that stroage of dry roots at room temperature was better than PP packaging, and that cold stroage was better than PE packaging for long-term stability.

Recommendation of NPK Fertilizers for Chinese Cabbage and Spinach Based on Soil Testing (토양검정(土壤檢定)에 따른 배추와 시금치의 NPK 시비추천(施肥推薦))

  • Song, Yo-Sung;Lee, Choon-Soo;Kwak, Han-Kang;Park, Young-Dae
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.26 no.1
    • /
    • pp.25-30
    • /
    • 1993
  • It is common that in the vegetable cultivation areas, the farmers tend to continue the heavy fertilization to maximize the crop yields in short term. This results in the accumulation of fertilizer elements in the soil and increase in the electrical conductivity of soil. Disregarding these, farmers continue to apply heavy doses of fertilizers. A field experiment was conducted to find out on such a soil whether fertilizer application taking the quantity of nutrients accumulated in the soil into account would save the fertilizer without losing the yield of crop, using Chinese cabbage and spinach as test crops. The findings of the experiment is summarized as following. 1. The yield of Chinese cabbage was not affected by reduction of $19kg\;P_2O_5/10a$ and $7kg\;K_2O/10a$ as compared to farmers doses, and in case of spinach the yield rather was increased under the reduction of $22kg\;P_2O_5/10a$ and $22kg\;K_2O/10a$. 2. The reduction of fertilizers according to plant nutrient status of soils did not affect the inorganic nutrient contents of the crops significantly, in both Chinese cabbage and spinach. 3. A trend was observed that the reduction in the P and K fertilizers application would shorten the storage period of Chinese cabbage. 4. The reduction in P and K fertilizers application resulted in the reduction in available P, exchangeable K, EC and $NO_3-N$ in the soil after the harvest of the crops.

  • PDF