• 접착 및 계면
• /
• 제12권4호
• /
• pp.105-110
• /
• 2011

폴리에스터/멜라민 경화형 도료는 기계적 물성, 내화학성 및 내마모성 등이 우수하여 pre-primed 도료 및 pre-coated metal에 널리 사용되고 있다. 그러나, 폴리에스터 수지 도료의 경화 도막은 강인하지만 유연성과 성형성이 낮은 문제점을 갖고 있다. 본 연구에서는 polycarbonate diol의 long alkyl chain을 폴리에스터 분자 구조 내에 연결시켜 경화 도막의 성형성을 개선하고자 하였으며, 성형성이 개선된 폴리에스터 도료의 선도장 강판용 도료의 적용 가능성을 확인하였다. 또한, 폴리카보네이트디올 분자량이 경화 도막 물성에 미치는 영향을 평가하고자 인장강도와 점탄성을 측정하였으며, 성형성을 확인하고자 drawing test를 실시하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.292-295
• /
• 2004

Recently, polymer-clay hybrid materials have received considerable attention from both a fundamental research and application point of view. This organ-inorganic hybrid, which contains a nanoscale dispersion of the layered silicates, is a material with greatly improved thermal and mechanical characteristics. Two classes of nanocomposites were synthesized using an unsaturated polyester resin as the matrix and sodium montmorillonite as well as an organically modified montmorillonite as the reinforcing agents. X -ray diffraction pattern of the composites showed that the interlayer spacing of the modified montmorillonite were exfoliated in polymer matrix. The mechanical properties also supported these findings, since in general, tensile strength, modulus with modified montmorillonite were higher than the corresponding properties of the composites with unmodified montmorillonite. Adding organically modified clay improved the tensile strength of unsaturated polyester by $22\%$ and the tensile modulus of unsaturated polyester was also improved by $34\%$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.797-803
• /
• 2001

The on-line cure monitoring of fiber reinforced thermosetting resin matrix composite material was performed for the better quality and productivity during manufacturing. Since the dissipation factor measured by dielectrometry method is dependent on the degree of cure and temperature of resin, in this study, a new method to obtain the degree of cure during on-line cure monitoring for glass/polyester composites was developed by employing a combination function of the temperature and the dissipation factor. Two sensor signals from a K-type thermocouple and an interdigitated dielectric sensor were processed during curing process under various cure cycles. The DSC (Differential Scanning Calorimetry) data was also used for the reference of degree of cure.

• Composites Research
• /
• 제14권2호
• /
• pp.33-42
• /
• 2001

DSC(differential scanning calorimetry)를 이용하여 S2-유리섬유/폴리에스터 프리프레그 복합재료의 경화반응식을 구성하였다. 구성된 경화식과 블리더의 수지 함침에 의한 열전달 조건의 변화를 고려하여, 두꺼운 복합재료의 두께 방향 위치에 따른 온도분포를 계산하였다. 유래섬유 복합재료의 경화중 온도과승을 줄이기 위한 방법으로 냉각 및 재가열 구간을 도입하여 경화 사이클을 개선하였다. 냉각-재가열 구간이 없는 기존의 경화 사이클과 개선된 경화 사이클로 두꺼운 복합재료를 각각 제조하여 short beam shear 시험 및 Barcol 경도시험을 실시하고, 그 결과를 비교하였다.

• 한국응용과학기술학회지
• /
• 제32권3호
• /
• pp.405-411
• /
• 2015

Carbon composites for flexible fiber heating element were examined to improve the electrical conductivity in this study. Carbon composites using carbon black, denka black, super-c, super-p with/without CNF or dispersant such as BCS03 and Sikament-nn were prepared. Carbon composite slurry was coated on plane film and yarns(cotton, polyester) and the performances of prepared heating materials were investigated by checking electrical surface resistance, adhesion strength. The plane heating element using carbon black under natural drying condition($25^{\circ}C$) had better physical properties such as surface resistance(185.3 Ohm/sq) and adhesion strength(above 90%) than those of other carbon composite heating elements. From these results, polyester heating element coated by carbon black showed better electrical line resistance(33.2 kOhm/cm) than cotton heating element. Then, it was found that polyester heating element coated by carbon black with CNF(3 wt%) and BCS03(1 wt%) appeared best properties(0.604 kOhm/cm).

• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.90-95
• /
• 2000

Today fiber composite materials are routinely used in such wide applications as ships automobiles aircraft space vehi-cles containers sporting goods and appliances. The current knowledge of machining glass fiber reinforced polyester com-posites unfortunately is inadequate for its optimum utilization in many applications. Therefore This paper deals with drilling characteristic of glass fiber reinforced polyester composites. In the drilling of glass fiber reinforced polyester the quality of the cut surfaces is strongly dependent on the drilling parameters. drilling tests were carried out on glass fiber reinforced polyester using standard HSS tools. The material containing random chopped strand fibers and woven roving was fabricated by hand lay-up The entrance and exit surface of the holes was examined. The cutting force was also mea-sured to analyze the drilling characteristics,.

• Advanced Composite Materials
• /
• 제16권3호
• /
• pp.195-206
• /
• 2007

Carbon nanofiber (CNF)/unsaturated polyester resin (UPR) was prepared by a solvent evaporation method, and the temperature dependency of electrical conductivity was investigated. The CNF/UPR composites had quite a low percolation threshold due to CNF having a larger aspect ratio and being well dispersed in the UPR matrix. The positive temperature coefficient (PTC) was found in the CNF/UPR composites and it showed stronger effect around the percolation threshold. The electrical resistance of the CNF/UPR composites decreased and had lower temperature dependency with increasing numbers of thermal cycles.

• Elastomers and Composites
• /
• 제49권1호
• /
• pp.53-58
• /
• 2014

가시광촉매의 특성 및 가시광촉매가 코팅처리된 자동차내장재 nylon/polyester 복합섬유에 대한 VOCs의 저감에 대해 알아보았다. 가시광촉매 Weltouch의 결정구조는 아나타제상과 루타일상이 복합된 것으로 약 420nm이상의 파장을 갖는 빛에너지에서도 활성을 나타냈다. 또한 가시광촉매가 처리된 자동차내장재 nylon/polyester 복합 섬유에서 발생하는 VOCs 및 포름알데히드는 현저한 저감효과를 나타냈으며, 섬유를 25회 세탁을 행하여도 가시광촉매의 탈락없이 표면에 견고하게 부착되어 가스분해성능을 유지하는 것으로 나타나서 세탁내구성이 우수한 것을 확인하였다.

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.137-142
• /
• 2005

The effects of temperature and initial crack length on impact fracture behavior of side plate material of 35 ton class FRP ship, which are composed by glass fiber and unsaturated polyester resin, were investigated. Impact fracture toughness of GF/PE composites displayed maximum value when the temperature of specimen is room temperature and $50^{\circ}C$, and with decrease in temperature of specimen, impact fracture toughness decreased. Impact fracture energy of GF/EP composites decreased with increase in initial crack length of specimen, and this value decreased rapidly when the temperature of specimen is lowest, $-25^{\circ}C$,. It is believed that sensitivity of notch on impact fracture energy were increased with decrease in temperature of specimen. As the GF/EP composites exposed in low temperature, impact fracture toughness of composites decreased gradually owing to the decrease of interface bonding strength caused by difference of thermal expansion coefficient between the glass fiber/polyester resin. Further, decrease of interface bonding strength of composites with decrease in specimen temperature was ascertained by SEM photograph of impact fracture surface.

• 한국지반신소재학회논문집
• /
• 제4권1호
• /
• pp.37-46
• /
• 2005

폐기물 매립지 관련 특성을 조사하기 위하여 PVA 지오텍스타일/HDPE 지오멤브레인 복합재료를 제조하였다. PVA 지오텍스타일의 인장특성, 인열 및 파열강도, 유효구멍크기와 투수성 등을 각각 측정하였다. 또한 침출수에 대한 화학저항성과 자외선 안정성도 측정하였으며, 하중조건에 따른 크리프 변형거동과 마찰특성도 측정하였다. 이들 결과로부터 PVA 지오텍스타일/HDPE 지오멤브레인 복합재료는 일반적으로 폐기물 매립지에 적용되는 폴리프로필렌이나 폴리에스테르 지오텍스타일에 비해 우수한 특성을 나타내었다. 끝으로, 감소인자 분석으로부터 PVA 지오텍스타일/HDPE 지오멤브레인 복합재료의 크리프 변형거동도 폴리프로필렌이나 폴리에스테르 지오텍스타일에 비해 안정함을 알 수 있었다.