본 논문에서는 종류가 다른 부직포가 삽입된 하이브리드 복합재료의 Mode I 층간파괴인성에 관한 연구를 수행하였다. Mode I 층간파괴인성값($J/m^2$)은 DCB실험에 의하여 얻어졌으며, 부직포를 삽입하지 않은 시편과 3종류의 부직포(8 $g/m^2$의 탄소부직포, 10 $g/m^2$의 유리부직포, 8 $g/m^2$의 폴리에스테르부직포)가 각각 삽입된 시험편에 대하여 실험을 수행하였다. 각 시험편들에 대한 Mode I 층간파괴인성값은 부직포를 삽입하지 않은 시편을 기준으로 탄소부직포를 삽입한 시편은 6.3% 감소하였고, 유리부직포를 삽입한 시편은 약 11.4% 감소한 반면 폴리에스테르부직포를 삽입한 시편은 약 69.4% 증가하였다. 폴리에스테르부직포는 탄소부직포에 비해 저렴하며 가볍고, Mode I 층간파괴인성값을 크게 증가시킴을 알 수 있었다.
Unsaturated Polyester Resin (UPR)은 유리섬유와 같은 강화제와 함께 사용되어 복합재료로 사용된다. 열경화성 수지인 UPR은 복합재료의 다양한 성형법 중 생산성이 우수하고 대량생산에 유리한 sheet molding compound (SMC) 성형법으로 산업에서 사용되고 있다. UPR을 기지재로 하는 섬유강화복합재료는 가볍고, 물성이 뛰어난 장점이 있지만 충격에 약하여 깨지기 쉽고, 경화 이후에는 부피가 감소하는 단점이 있기 때문에 강인성과 유연성을 부여할 수 있는 폴리올과 캡핑제를 달리하는 폴리우레탄 4종을 합성하여 첨가하여 그 단점을 극복하고자 하였다.
페놀 컴포지트(이하 PC라 약칭)의 실용화에 대해서, 세계에서 가장 빠르게 실용화 한 $\lceil$영국의 경우$\rfloor$에 대해서 본보고서를 포함해서 합계 7편을 보고했다. 제1$\~$2편은 런던 지하철 화재사고 대책을 중심으로 세론과 행정 측의 민첩하고 신속한 대응이 시민에게 $\lceil$검은 연기와 유독가스의 화재사고$\rfloor$를 일어나지 않도록 하는 $\lceil$안전$\rfloor$을 보장한 이야기를 2회 보고했다. 제3$\~$4편은 선박$\cdot$주정, 해상 오일리그 등 역시 $\lceil$화재가 발생하면 도피하기 어려운 장소$\rfloor$에서의 실용화 상황, 제5편은 그 응용으로써 $\lceil$건설$\rfloor$ 특히 $\lceil$건축$\rfloor$ 용도에서의 실용화에 대해서 영국사회의 노력을 서술했다. 그리고 제 6편과 본편에서는 그 실용화 과정에서, 지금까지 겪은 시행착오의 기술적인 기초 데이터의 수집과 초기 실적과정에서의 어려웠던 이야기를 서술한다.
열방성 액정고분자(TLCP)와 폴리(에틸렌 테레프탈레이트)를 혼합용매 중에서 블렌딩하였으며, 이들 블렌드는 capillary rheometer die를 통하여 $287^{\circ}C$에서 섬유상 압출물로 가공되었다. 블렌드와 제조된 복합재료의 열적 성질, 기계적 성질, 모폴로지는 DSC, 편광현미경, SEM 및 인장시험에 의하여 조사되었다. 블렌드의 결정화 동력학은 등온 DSC 방법에 의하여 측정된 데이타로부터 Avrami식을 이용하여 결정화 속도 및 결정성장 메카니즘에 대한 정보를 얻었다. 블렌드내의 액정상은 가공온도조건하에서 거대상분킥나 열분해현상을 보이지 않았으며, 액체질소 속에서 절단된 섬유 단면의 SEM 관찰에 의하면, 섬유내 TLCP domain은 $0.1{\mu}m$에서 $0.2{\mu}m$정도의 크기로 분산되었고, 두 상 계면에서의 접착은 잘 되어있음을 알 수 있었다. TLCP/PET in-situ 섬유상 복합재료의 인장강도와 모듈러스는 TLCP 함량이 많을수록, draw ratio가 높을수록 증가됨을 알 수 있었다.
방향족 액정 폴리에스테르는 열방성 액정 중합체의 대표저인 예로 지금까지 구조-물성 관계가 많이 연구되었다. 본 연구에서는 유기 용매에 녹일 수 있는 가용성 방향족 액정 폴리에스테르를 합성하고, 아세틸렌 말단기를 갖는 열경화성 수지와 복합화하여 제반 물성을 비교하였다. 가용성 방향족 액정 폴리에스테르는 6-hydroxy-2-naphthoic acid, terephthalic acid, isophthalic acid 및 4-aminophenol을 단량체로 하여 에스테르 및 아미드 교환 반응에 기초로 한 축합 중합법을 이용하여 합성하였다. 아세틸렌 말단기를 갖는 열경화성 수지는 4-ethynylaniline과 terephthaloyl dichloride, isophthaloyl clichloride, 4,4'-biphenyldicarbonyl dichloride 등과 각각 반응시켜 합성하였다. 가용성 방향족 액정 폴리에스테르와 열경화성 수지를 용액 블렌딩하고 열처리하여 복합체를 제조하였으며, 복합체의 열적 안정성, 열팽창계수, 유전특성 등을 조사하였다.
폴리에스테르와 SBR 1502 고무의 접착을 위해 RTFL(resorcinol-tannin-formaldehyde-latex) 접착제를 사용하였다. T-peel geometry를 이용하여 접착력을 평가한 결과 접착제 조성에서 레소시놀과 탄닌이 4대 6의 중량비로 합성된 접착제를 사용한 경우 뛰어난 접착력을 보였다. 폴리에스테르 표면의 소수성과 활성기의 부족에도 불구하고 SBR 고무와 높은 접착력을 보인 이유는 RTFL 접착제 자체의 일정 조성에서 나타나는 toughness 때문이었다. 또한 폴리에스테르와 고무 접착을 위한 single dip 시스템인 N-3형 접착제와 RTFL 접착제를 사용하여 폴리에스테르와 SBR 고무를 접착시킨 후 $-20^{\circ}C{\sim}100^{\circ}C$의 온도 범위와 $0.2cm/min{\sim}50cm/min$의 박리속도 조건아래서 박리 실험하여 얻은 mastercurve들을 비교한 결과 전 범위에서 RTFL 접착제는 기존의 N-3형 접착제와 거의 필적할만한 접착 결과를 나타내었다.
In this paper, a novel fibrous material known as axially reinforced braided composite rods (BCRs) have been developed for reinforcement of soils. These innovative materials consist of an axial reinforcement system, comprised of longitudinally oriented core fibres, which is responsible for mechanical performance and, a braided cover, which gives a ribbed surface texture for better interfacial interactions with soils. BCRs were produced using both thermosetting (unsaturated polyester) and thermoplastic (polypropylene) matrices and synthetic (carbon, glass, HT polyethylene), as well as natural (sisal) core fibres. BCRs were characterized for tensile properties and the influence of core fibres was studied. Moreover, BCRs containing carbon fibre in the core composition were characterized for piezoresistivity and strain sensing properties under flexural deformation. According to the experimental results, the developed braided composites showed tailorable and wide range of mechanical properties, depending on the core fibres and exhibited very good strain sensing behavior.
Kim, Yun-Hae;Ha, Jin-Cheol;Lee, Jin-Woo;Park, Jun-Mu;Han, Joong-Won;Choi, Byung-Keun;Moon, Kyung-Man;Nisitani, Hironobu
International Journal of Ocean System Engineering
/
제3권1호
/
pp.38-43
/
2013
Wind turbine generator is, recently, becoming bigger and bigger. So, in order to produce large amounts of electricity generation, we have to consider the length and thickness of the blade. We investigated the skills of processing for making the super thickness laminate through development fabrication process for high speed curing composite heating table.
Ternary blend fibers (TBFs) based on melt blends of PEN, PET, and TLCP were prepared by melt blending and spinning to achieve high performance fibers. The reinforcement effect and the TLCP fibrillar structure resulted in the improvement of mechanical properties for TBFs. Molecular orientation was an important factor in determining the tensile strength and modulus of TBFs. Another part of this research is silica nano-particle filled PEN composites were melt-blended to improve mechanical and physicalproperties, and processability. The tensile modulus and strength were improved adding silica nano-particles to the PEN. The decreased melt viscosity by the fumed silica resulted in the improvement of the processability. The fumed silica may act as a nucleating agent in the PEN matrix.
In recent years, composite materials such as fiber reinforced plastics (FRP) have gained considerable attention in the aircraft and automobile industries due to their light weight, high modulus and specific strength. In practice, control of chip formation appears to be the most serious problem since chip formation mechanism in composite machining has significant effects on the finished surface [1,2,3,4,5]. Current study will discuss frequency analysis based on autoregressive (AR) time series model and process characterization in orthogonal cutting of a fiber-matrix composite materials. A sparsely distributed idealized model composite material, namely a glass reinforced polyester (GFRP) was used as workpiece. Analysis method employs a force sensor and the signals from the sensor are processed using AR time series model. The experimental correlation between the different chip formation mechanisms and model coefficients are established.(omitted)
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.