• 패션비즈니스
• /
• 제4권3호
• /
• pp.1-13
• /
• 2000

This research chose three kinds of sleeping bags with different fillings (A: interfill polyester, B: brushed polyester, C: down) and put them in two environmental conditions (Env. I : $25{\pm}1^{\circ}C$, $50{\pm}10%$; Env. II : $18{\pm}1^{\circ}C$, $70{\pm}10%$). The measured Skin temperature, Temperature and Humidity in sleeping bag, Rectal temperature and Psychological reaction. The results of experiment were as follows: 1. The mean skin temperature of Sleeping Bag B was the closest to the most comfortable value in the two environmental conditions. 2. Temperature and humidity in sleeping bags, in both environmental conditions, contained the value nearest to the most comfortable one in Sleeping Bag B. 3. Rectal temperature in both environments had a slight change in the range of antibody temperature in all the subjects of sleeping bags. 4. As subjective psychological reaction, both thermal and humid sensation approached the most comfortable zone in Sleeping Bag B.

• 한국대기환경학회지
• /
• 제27권4호
• /
• pp.454-459
• /
• 2011

In this study, the recovery rate of Tedlar bag (T) sampler was investigated in comparison to polyester aluminum bag (P) sampler. To derive the comparative data sets for the relative performance between different samplers, a series of calibration experiments were performed by using 1 ppb standard of four offensive reduced sulfur compounds (RSC) odorants ($H_2S$, $CH_3SH$, DMS, and DMDS) along with $SO_2$ and $CS_2$. All the analysis was made by gas chromatography/pulsed flame photometric detector (GC/PFPD) combined with air server/thermal desorber (AS/TD). The measurement data were obtained by loading gaseous standards (1 ppb) at 3 injection volumes (250, 500 and 1,000 mL) at three intervals (0, 24 and 72 hrs). The recovery rates (RR) of P sampler were computed against the slope values of T sampler. According to our analysis, P sampler exhibits slightly enhanced loss relative to T, especially with light RSCs ($H_2S$ and $CH_3SH$). At day 0, RR for the two were 88 and 85%, respectively. Such reduction proceeded rather rapidly in the case of $H_2S$ through time. However, P sampler was more stable to store $SO_2$ unlike others. Despite slightly reduced recovery, P sampler appears as a good replacement of T sampler.

• 한국기후변화학회지
• /
• 제8권1호
• /
• pp.31-39
• /
• 2017

The emission quantity of nitrous oxide is second largest among non-$CO_2$ greenhouse gas in Korea. In this study, we investigated loss rate of nitrous oxide which was filled in PVF and Al-PE bag as time goes on. Concentrations of tested samples were about 25 ppmv, 50 ppmv, 75 ppmv prepared by standard reference gas. In case of all experiments, loss rate of PVF bag was higher than Al-PE bag. After 18 days, loss rate of PVF bag was from 29.7% to 38.6% while Al-PE bag was from 21.7% to 23.7%. Especially the differential growed bigger when initial concentration of $N_2O$ in PVF bag was lower. And we also studied the effect of cock opening/closing procedures on loss rate. Prepared samples in experimental group were analyzed several times for 20 days and samples in control group were analysed only 1 time after 20 days. The experimental results showed that cock opening/closing procedures appeared to have little impact on loss rate.

• 분석과학
• /
• 제18권4호
• /
• pp.338-343
• /
• 2005

본 연구에서는 실온조건에서 황성분의 채취에 사용하는 두 가지 백 방식의 시료회수율을 비교 분석하였다. 이를 위해, 가스-타잇 주사기 내부에서 원표준시료를 희석하여 검량선을 작성하였다. 그리고 이에 대비하여 테들러 백이나 플리에스터 백으로 희석한 표준시료를 이용하여 검량선을 확보하였다. 가스타잇 주사기로 확보한 검량선과 백으로 확보한 검량선의 기울기를 비교하는 방식으로 백방식의 시료 손실 또는 회수율을 비교분석한 결과, 테들러 백의 경우 평균 87%의 회수율, 폴리에스터 백의 경우 평균 77% 수준의 회수율이 관측되었다. 결과적으로 백방식으로 시료를 채취할 경우, 시료의 손실이 확인되었다. 따라서 백방식의 현장시료 채취를 할 경우, 시료의 손실에 대한 가능성을 염두에 두고 이와 관련된 여러 가지 인자들을 동시에 검정하는 것이 중요하다고 결론지을 수 있다.

• 한국산업보건학회지
• /
• 제18권3호
• /
• pp.189-203
• /
• 2008

Cylindrical bag filter system with pulse jet cleaning has been the most common device to control particle laden exhaust gas from the various industrial processes. But, it has many shortcomings due to particle reattachment and frequent bag rupture. In recent years, rectangular type bag filter system has been developed to overcome the problems associated with the cylindrical system. However, not many studies about the rectangular system were not done, compared to the cylindrical system. In this study, the optimum pulse jet cleaning conditions were thus tested by the series of experiments. The factors tested in this study are pulse distance, pulse pressure, pulse duration, the number of holes for pulsing and bag materials. A single bag ($1,500mmL{\times}50mmW{\times}300mmH$) system and a multi-bags (3 bags in a row) were tested separately. The highest removal efficiency with a single bag system was found at the conditions with pulse distance of 10cm, pulse pressure of $3kg/cm^2$, pulse duration of 0.3s, pulse jet number of 6 and Polyester bag. With the multi-bags system, the best cleaning conditions were found at the bag interval of 20cm with the simultaneous pulsing and the bag interval of 15cm with the serial pulsing.

• 한국대기환경학회지
• /
• 제28권3호
• /
• pp.306-315
• /
• 2012

In this study, storage stability of reduced sulfur compounds ($H_2S$, $CH_3SH$, DMS, $CS_2$, and DMDS) and $SO_2$ in sampling bags was investigated in terms of two contrasting storage approaches between forward (F) and reverse (R) direction. The samples for the F method were prepared at the same time and analyzed sequentially through time. In contrast, those of reverse (R) method were prepared sequentially in advance and analyzed all at once upon the preparation of the last sample. In addition, relative performance between two different bag materials (PVF and PEA) was also assessed by using 100 ppb standard. The response factors (RF) of gaseous RSC samples were determined by gas chromatography/pulsed flame photometric detector (GC/PFPD) combined with air server (AS)/thermal desorber (TD) system at storage intervals of 0, 1, and 3 days. There is no statistical difference in all RSCs between two storage methods. However, the results of relative recovery indicated 2.58~12.8% differences in compound type between the two storage methods. Moreover, loss rates and storage stability of $H_2S$ and $SO_2$ were considerably affected by bag materials than any other variables. Therefore, some considerations about storage methods (or bag material types) for sulfur compounds are needed if stored by sampling bag method.

• 마이크로전자및패키징학회지
• /
• 제11권1호
• /
• pp.43-47
• /
• 2004

We have been using Moisture Barrier Bags for dry packing of semiconductor packages to prevent moisture from absorbing during shipping. Moisture barrier bag material is required to be waterproof, vapor proof and offer superior ESD (Electro-static discharge) and EMI shielding. Also, the bag should be formed easily to the shape of products for vacuum packing while providing excellent puncture resistance and offer very low gas ＆ moisture permeation. There are some problems like pinholes and punctured bags after sealing and before the surface mount process. This failure may easily result in package pop corn crack during board mounting. The bags should be developed to meet the requirements of excellent electrical and physical properties by means of optimization of their raw material composition and their thickness. This study investigates the performance of moisture barrier bags by characterization of their mechanical endurance, tensile strength and through thermal analysis. By this study, we arrived at a robust material composition (polyester/Aluminate) for better packing.

• 분석과학
• /
• 제35권3호
• /
• pp.116-123
• /
• 2022

대기 중 휘발성유기물(VOC) 분석을 위해 가스시료 채취 용기로서 고분자 재질의 유연한 백(bag)이나 금속재질의 캐니스터 또는 유리병 등을 사용하고 있다. 본 연구에서는 가스시료 용기에 시료 채취 후 분석 시까지 단기 보관에 따른 휘발성시료의 농도 안정성을 다양한 용기에 대해 비교하였다. 시료용기로 폴리비닐플로라이드(polyvinyl fluoride, PVF), 폴리프로필렌(polypropylene, PP), 폴리에스터-알미늄(polyester aluminum, PE-Al) 재질의 폴리머백과 스테인레스 재질의 캐니스터 그리고 2종의 갈색유리병을 사용하였으며 VOC 시료로 100 nmol/mol의 벤젠, 톨루엔, 에틸벤젠, 자일렌, 스타이렌 표준가스를 사용하였다. 열탈착-가스크로마토그래프-불꽃이온화검출기(TD-GC-FID)를 사용하여 용기 종류별로 10~20일 동안 보관된 시료의 농도변화를 측정하였다. 캐니스터와 갈색병은 1주일 동안 큰 농도의 변화가 없었으며 2주까지도 처음 농도의 80 %이상 농도를 유지하였다. 폴리머재질의 모든 백(bag)형 용기의 경우는 벤젠과 톨루엔을 제외한 모든 성분이 1일 후에 처음 농도의 70 % 미만으로 큰 농도 변화를 보였다. 특히 에틸벤젠, 자일렌, 스티렌의 경우 처음 농도의 30 % 미만이 남아 매우 큰 농도 변화를 보였다.

• 한국의상디자인학회지
• /
• 제24권2호
• /
• pp.27-44
• /
• 2022

The purpose of this study is to attempt to diversify artistic expression through combinations of the twelve zodiac animals and origami techniques and to propose new directions for fashion design by applying these to fashion accessory bag designs. For the research method, this study researched the representative forms and characteristics of twelve zodiac animals based on the cultural background. Also, diverse cases of origami techniques were sought to apply them to the development of bags. The results are as follows. First, expressed forms of the Chinese zodiac were newly expanded by realizing the form of Chinese zodiac animals through various origami techniques. Origami work displays abstract visual effects rather than intuitive feelings or expressions of flat designs. With this, detailed realizations could be made through the characteristics and cultural implications of animals. Second, the work created in this study utilized zero-waste patterns that use origami techniques on one whole piece. During pattern production, folded parts were marked without waste and the outer fabric and lining were produced. Patterns were all symmetrical lines so most forms were expressed with squares and equilateral triangles. Third, through actual work produced using fabric instead of paper, effects that are brought about through folding are determined in diverse ways according to fabric textures or material types and thicknesses. When paper is folded, shapes are created as folded, but fabric requires the use of supportive material to create the effects of origami. Polyester and blended fabric were easy to use with high levels of function and practicality. Through such diverse production attempts, fixing methods, hand sewing, sewing machines, double-sided tape, and leather adhesive were used.

• 한국환경과학회지
• /
• 제32권9호
• /
• pp.659-669
• /
• 2023

The purpose of this study is to predict the pressure drop due to the installation of venturi under diverse operating conditions such as dust concentration, pulse interval and pressure, and filtration velocity using algebraic-linear regression model and use it as an economic data and efficient operating condition for a pulse air jet bag filter. A pilot scale bag filter with a filter a filter size(Ø140 × 850ℓ, 12) was used, and the filters used in the experiment were the polyester filters most commonly used in real industrial sites. The SAS 9.4 program (SAS Institute, USA) was used to predict and to determine the effects of inlet concentration (C_i), pulse interval (P_i) and pressure (P_p), filtration velocity (V_f), presence or absence of venturi, etc. The results are shown below. The variation in pressure drop with or without venturi installation was 38.8 mmAq when venturi is installed and 47.6 mmAq when venturi is not installed, indicating a difference in pressure drop of 8.8 mmAq depending on venturi installation. It is estimated that the efficiency can be improved by about 18.5% if the venturi is installed.