• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.157-163
• /
• 2009

This study was conducted for the isolation, purification, and characterization of a protease from Korean pear, to see its proteolytic activity on chicken actomyosin and to find the optimum pH and temperature of activity on chicken actomyosin. The protease was isolated from crude extract of Korean pear by ammonium sulfate precipitation. Further purification was done by DEAE-Sepharose ion-exchange chromatography, Mono-Q and Mini-Q column chromatography. The purified enzyme gave a single protein band on SDS polyacrylamide gel electrophoresis and the molecular weight was found to be 38 kDa. The specific activity of purified enzyme was 34,907 unit/mg with 25 fold purification and the yield was 2%. The purified enzyme incubated with chicken actomyosin showed high activity. The optimum pH and temperature for enzyme activity on chicken actomyosin were 6.5 and $70^{\circ}C$, respectively. A protease was purified from Korean pear for the first time and characterized. It was found to be promising for meat tenderization.

• Archives of Pharmacal Research
• /
• v.29 no.5
• /
• pp.418-423
• /
• 2006

Tabanus anticoagulant protein (TAP) was isolated from the whole body of the tabanus, Tabanus bivittatus, using three purification steps (ammonium sulfate fractionation, gel filtration on Bio-Gel P-60, and ion exchange chromatography on DEAE Sephadex gel). The purified TAP, with a molecular weight of 65 kDa, was assessed to be homogeneous by SDS-polyacrylamide gel electrophoresis, and an isoelectric point of 7.9 was determined by isoelectric focusing. The internal amino acid sequence of the purified protein was composed of Ser-Leu-Asn-Asn-Gln-Phe-Ala-Ser-Phe-lle-Asp-Lys-Val-Arg. The protein was activated by $Cu^{2+}\;and\;Zn^{2+}$, and the optimal conditions were found to be at pH $3\sim6\;and\;40\sim70^{\circ}C$. Standard coagulation screen assays were used to determine thrombin time and activated partial thromboplastin time. Chromogenic substrate assays were performed for thrombin and factor Xa activity. TAP considerably prolonged human plasma clotting time, especially activated partial thromboplastin time in a dose-dependent manner; it showed potent and specific antithrombin activity in the chromogenic substrate assay. Specific anti-factor Xa activity in TAP was not detected. Overall, this result suggested that TAP has significant anticoagulant activity on blood coagulation system.

• Archives of Plastic Surgery
• /
• v.38 no.2
• /
• pp.166-172
• /
• 2011

Purpose: Facial contouring surgery for improving congenital, acquired deformity and senile change were attempt in past. Recently contouring surgery became more interested subject for improving the flat forehead and temple area. Many synthetic materials were used such as Collagen, silicon, polyacrylamide gel as liquid form and Gore-tex, silicon implant, endotine as solid form. But, these synthetic implants associate complications as foreign body reaction, infection, displacement, granuloma formation and absorption. Auto-fat injection are used for disfigurement of many part of body. We did auto-fat injection for facial contouring of forehead and temple region. Auto-fat injection is suitable without foreign body reaction, displacement, and toxic reaction. Also auto-fat is relatively simple to obtain from patient and less expensive and able to repeat surgeries. Methods: From 2006 to 2009, 150 patients were treated with Auto-fat injection for facial contouring. For follow up, we sent questionnaire to all patients but 110 patients returned answer sheets. The patients consisted of 20 male patients and 90 female patients with an age ranged from 26 to 60, and the mean 43. Fat tissue were injected 6-8 cc in forehead, 7-12 cc in temple area and fat were harvested from thigh and abdomen. Results: In follow up, all patients, showed absorption of injected fat varied degree and except two patients all patients underwent secondary fat injection. Complications were minimal and neuropraxia of facial nerve were recovered. Most of the patients were satisfied with result of procedure, and answered that they recommend same procedure to their friends and will do surgery again. Conclusion: Auto-fat injections were implemented for facial contouring in 150 patients and obtained satisfactory result. Auto-fat injection is relatively easy procedure and applicable widely. Even though, by passing time, some of the injected fats are absorbed, auto-fat injection could be choice of treatment for contouring forehead and temple. With accumulations of cases and development of surgical technique, better result could be expected.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.2 no.2
• /
• pp.161-166
• /
• 2001

The storage proteins of the mulberry longicorn beetle, Apriona germari Hope, were purified and characterized. Three kinds of storage protein (SP1, SP2 and Sp3) were purified from the last instar larval hemolymph of A. germari by the FPLC techniques, anion exchange chromatography and gel permeation chromatography. The SP1, SP2 and SP3 have a native molecular weight of 480, 440 and 420 kDa, respectively. In the SDS-polyacrylamide gel electrophoresis analysis, these storage proteins are composed of a single protein subunit with molecular weight of 90, 85 and 80 kDa, respectively. This result showed that the storage proteins are hexameric protein. The SP1 and SP2 were stained with Schiffs reagent, but SP3 was not stained. It can be assumed that SP1 and SP2 are glycoprotein. Western blot analyses using the each of polyclonal antiserum against purified SP1, SP2 and SP3 showed that the three antibodies reacted with the each of SP bands, respectively. Also, antibodies against SP1 and SP3 cross-reacted with the SP3 and SP1, respectively. However, SP2 was not cross-reacted with these two antibodies. Also, antiserum against SP2 did not cross-reacted with the SP1 and SP3.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.2 no.2
• /
• pp.167-172
• /
• 2001

The vitellin of firefly, Pyrocoelia rufa, is composed of three polypeptides, designated Vn1 (175 kDa), Vn2 (160 kDa) and Vn3 (45 kDa) in SDS-polyacrylamide gel electrophoresis. Three subunits of vitellin were presented in the female adult hemolymph, ovary and egg extracts, but not observed in the male. This vitellin was purified from the eggs of P. rufa by the FPLC techniques, anion exchange chromatography and gel permeation chromatography. In nature, vitellin of P. rufa has molecular weight of 400 kDa. Western blot analysis using polyclonal antiserum against purified vitellin showed that the antiserum was reacted with the three polypeptides, Vnl, Vn2 and Vn3 from the female adult hemolymph, ovary and egg extracts. Amino acid residues at N-terminus of three subunits were sequenced. The N-terminal sequences of large subunits, Vnl and Vn2, were similar to each other, But, the N-terminal sequences of small subunits Vn3, did not have any signnificant homology with large subunits.

• Plant Biotechnology Reports
• /
• v.3 no.2
• /
• pp.167-174
• /
• 2009

To identify genes involved in rice Pi5-mediated disease resistance to Magnaporthe oryzae, we compared the proteomes of the RIL260 rice strain carrying the Pi5 resistance gene with its susceptible mutants M5465 and M7023. Proteins were extracted from the leaf tissues of both RIL260 and the mutant lines at 0, 24, and 48 h after M. oryzae inoculation and separated by two-dimensional polyacrylamide gel electrophoresis (2-DE). Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis identified eight proteins that were differently expressed between the resistant and susceptible plants (three down- and five up-regulated proteins in the mutants). The down-regulated proteins included a triosephosphate isomerase (spot no. 2210), a 2,3-bisphosphoglycerate-independent phosphoglycerate mutase (no. 3611), and an unknown protein (no. 4505). In addition, the five up-regulated proteins in the mutants were predicted to be a fructokinase I (no. 313), a glutathione S-transferase (no. 2310), an atpB of chloroplast ATP synthase (no. 3616), an aminopeptidase N (no. 3724), and an unknown protein (no. 308). These results suggest that proteomic analysis of rice susceptible mutants is a useful method for identifying novel proteins involved in resistance to the M. oryzae pathogen.

• Korean Journal of Veterinary Research
• /
• v.40 no.1
• /
• pp.63-71
• /
• 2000

An immunogenic, high molecular weight lipopolysaccharide (LPS)-protein complex isolated from a potassium thioncyanate extract of a Pasteurella multocida (P multocida ; strain P-2383, capsular type A and somatic type 3) was characterized. Chemical analysis of the complex by gas chromatography on a capillary column demonstrated that this complex contained most of the chemical constituents characteristic of LPS extracted by the phenol-water methed from the whole bacterium. However, there was proportionately more carbohydrate than fatty acid in the complex in contrast to LPS in which fatty acid seemed to be in excess. When toxicity of the complex was evaluated in 10-day-old chicken embryos, the complex was less toxic ($LD_{50}=12.72{\mu}g$) than the purified LPS ($LD_{50}=0.44{\mu}g$). The $LD_{50}$, of the LPS moiety extracted from the complex was $5.24{\mu}g$. Composition of the complex was analyzed by SDS-PAGE with silver staining and Western immunoblotting. The complex did not migrate through the polyacrylamide gel unless dissociated with SDS. The complex dissociated with SDS contained at least 32 different protein and polysaccharide components: 18 components reacted with an antiserum against the complex. There was no significant compositional variation between the complexes from different strains, but quantitative differences in individual components were noted. When cross-protectivity of the complex was evaluated in mice, this complex provided substantial protection not only against the homologous bacteriun but also against different P multocida strains of the same serotype. LPS-protein complexes isolated by the same method from other strains also induced protection against an challenge with P-2383.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.18-25
• /
• 2001

A new wood-degrading fungus Trichophyton rubrum LKY-7 secretes a high level of laccase in a glucose-peptone liquid medium. The production of laccase by the fungus was barely induced by 2,5-xylidine. The laccase has been purified to homogeneity through three chromatography steps in an overall yield of 40%. The molecular mass of the purified laccase was about 65 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis. The purified laccase had the distinct blue color and had basic spectroscopic features of a typical blue laccase: two absorption maxima at 278 and 610 nm and a shoulder at 338 nm. The N-terminus of the laccase has been sequenced, revealing high homology to laccases from wood-degrading white-rot fungi such as Ceriporiopsis subvermispora. The enzyme had a "low" redox potential (0.5 V vs normal hydrogen electrode), yet it was one of the most active laccases in oxidizing a series of representative substrates/mediators. Compared with other fungal laccases, the laccase has a very low Km value with ABTS [2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid] as a substrate and a very high Km value with violuric acid as a substrate. The laccase has the isoelectric point of 4.0. The laccase had very acidic optimal pH values (pH 3-4) while it was more stable at neutral pH than at acidic pH. The laccase oxidized hydroquinone faster than catechol and pyrogallol. The oxidation of tyrosine by the laccase was not detectable under the reaction conditions. The laccase was strongly inhibited by sodium azide and sodium fluoride. fluoride.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.2
• /
• pp.53-60
• /
• 2015

The effects of stirring speed during filler modification by dual polymers on flocculation and reflocculation of PCC (precipitated calcium carbonate) particles and its effect on handsheet properties were elucidated. PCC surface was modified by adsorbing A-PAM (anionic polyacrylamide) and C-starch (cationic starch) in series at various stirring speeds. It was found that increasing stirring speed during filler modification decreased the initial floc size of PCC. Continuous stirring with the same speed for filler modification resulted in the decrease of a floc size, eventually reached a steady state. The variations in a floc size was influenced by the stirring speed during filler modification: the lower the stirring speed during filler modification, the larger the floc size variations. Conclusively, the stability of PCC floc could be improved by increasing the stirring speed. In addition, the stirring speed influenced the handsheet properties. The smaller the PCC floc, the lower the strength of handseet. However, too much larger floc size also deteriorated paper strength. There exists an optimum floc size in term of paper strength which shall be controlled by stirring speed during filler modification.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.1-10
• /
• 2008

Synthetic mineral microparticles (SMM) is a patented system which has been developed to promote drainage of water and retention of fine particles during papermaking. It is shown in patents that the SMM system can have advantages in both of drainage and retention, compared with montmorillonite (bentonite), which is one of the most popular materials presently used in this kind of application. Turbidity and gravity drainage time were measured using a Britt-Jar test with representative SMM formulations, in order to confirm the efficacy of SMM covering a wide range of compositions and discover effects of some key variables that have the potential to lead to unexpected advantages in terms of the effectiveness of the microparticles, when used in combination with a cationic polyacrylamide treatment of papermaking furnish. An iron silicate showed highest retention performance, as well as suitably fast drainage time relative to other metal silicate and bentonite. Zinc silicate improved retention and drainage. SMM synthesized from aluminum sulfate ($Al_2(SO_4){_3}$) did not show a benefit in retention and drainage, relative to bentonite. SMM synthesized from aluminum chloride ($AlCl_3$) performed better in drainage and retention than bentonite when the Al/Si ratios were 0.76 and 1.00. It was found that when the Al/Si ratio and neutralization are considered, pH variation due to the change of Al/Si ratio can be a key factor to control the size of primary metal silicate particles and the degree of coagulation of the primary particles.