• Analytical Science and Technology
• /
• v.8 no.2
• /
• pp.161-166
• /
• 1995

Determination of acteoside in Pedicularis resupinata var. oppositifolia has been studied using ion pair liquid chromatography. Sample was extracted with 40mL methanol for 4 hrs. The extract was cleaned up by using Sep-Pak $C_{18}$ catridge and 8mL aqueous methanol eluent(methanol 50%, water 50%, phosphate buffer pH=8.0). Its determination was performed by means of IP-HPLC with a Hamilton PRP-1 polystyrene-divinylbenzene reversed phase column($15cm{\times}4.6mm$ i. d., $5{\mu}m$) and an aqueous methanol eluent(methanol 60%, water 40% phosphate buffer pH=8.2) containing of $5.0{\times}10^{-3}M$ tetrabutylammonium bromide. The established method was applied to the sample that was collected in area of Pyung Chang gun. As a result, its content ranges showed to be 0.062~0.076%.

• Korean Journal of Food Science and Technology
• /
• v.38 no.1
• /
• pp.121-127
• /
• 2006

Microbial and nutritional characteristics of Kwangchun shrimp Jeotgal (salt-fermented shrimp) were assessed. Total mesophilic bacteria, coliforms, and S. aureus counts in Kwangchun shrimp Jeotgal were 3.48-5.42, 2.22-2.95, and 0.58-2.51 $log_{10}CFU/g$, respectively. Yeast and mold were detected only in Ohjeot (1.99 $log_{10}CFU/g$) and Yookjeot (1.47 $log_{10}CFU/g$). B. cereus, L. monocytogenes, Vibrio spp. and E. coli were not detected in Kwangchun shrimp Jeotgal, which contained abundant macrominerals (Ca, Mg, Na, K), with Na showing highest content. Palmitic acid content was higher than those of other saturated fatty acids. Eicosapentaenoic acid and docosahexaenoic acid contents were higher than those of other poly unsaturated fatty acids. Results showed Kwangchun shrimp Jeotgal is safe microbiologically with abundant nutritional components.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.111-120
• /
• 2010

This study evaluated strength properties of recycled asphalt concretes using warm-mix technology. Granite with maximum size of 13mm and penetration grade of 80-100 virgin binder were used for mixing in recycled mixtures. Mix design was performed using 20% and 30% RAP(coarse : fine= 6 : 4) contents. GPC, penetration, absolute viscosity and kinematic viscosity were measured for determining ratio of two warm-mix additives (Evotherm and Sasobit). Low-density polyethylene(LD) used as asphalt modifier for improving stiffness of recycled WMA mixtures in this study. Therefore, a total of 11 mixtures were prepared in this study; 8 warm-mix recycled mixtures(2 RAP contents${\times}$2 warm-mix additives${\times}$2 modifiers), 2 hot-mix recycled mixtures and 1 HMA virgin mixture(control). Deformation strength, indirect tensile strength, moisture sensitivity, permanent deformation by wheel tracking tests were measured out for evaluating fundamental properties of recycled asphalt concretes using warm-mix technology.

• Korean Journal of Food Science and Technology
• /
• v.50 no.6
• /
• pp.572-580
• /
• 2018

Biologically active substances including gamma-aminobutryric acid (GABA) were added into whey by co fermentation using Bacillus subtilis HA and Lactobacillus plantarum EJ2014. The first fermentation using B. subtilis HA with 5% monosodium glutamate (MSG) and 2% glucose enhanced the production of poly-${\gamma}$-glutamic acid (PGA), resulting in higher consistency of $4.09Pas^n$ as well as whey protein peptides. After the second fermentation using L. plantarum EJ2014, the remaining MSG (3.40%) as a precursor was completely converted to 2.21% GABA. Furthermore, the lactose content in whey decreased from 6.73 to 3.68% after co-fermentation, and the tyrosine content increased from 20.47 to 38.24%. Peptides derived of whey proteins were confirmed by SDS-PAGE. Viable cell counts of B. subtilis and L. plantarum were 5.83 log CFU/mL and 9.20 log CFU/mL, respectively. Thus, co-fermentation of whey could produce the novel food ingredient fortified with biologically active compounds including GABA, ${\gamma}$-PGA, peptides, and probiotics.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.542-547
• /
• 1998

Polyamine type polymer flocculants were synthesized and their characterization, viscosity and flocculation studies were conducted. In order to increase the molecular weight of polyamine flocculant which was prepared by polycondensation reaction from dimethylamine and epichlorohydrin, a small amount of 1,6-hexanediamine was employed. The incorporation of 1,6-hexanediamine up to 5.5 mole % replacing corresponding part of dimethylamine gave a branched type polyamine sample with increased intrinsic viscosity ([${\eta}$]=0.46 in 1 wt % aqueous NaCl solution). The amount of 1,6-hexanediamine above 5.5 mole %, however, resulted in gelation during polymerization. Utilizing raw water from Maegok potable water treatment plant, it was found that the addition of polyamine flocculant at a concentration of 1 mg/L level could reduce the amount of polyaluminum chloride (PAC) inorganic flocculant by half (15 mg/L). It was also observed that the incoporation of polyamine flocculant at 1 mg/L level was effective in the higher pH raw water, while PAC inorganic flocculating agent alone was not effective.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.893-901
• /
• 2001

We developed the nerve growth factor (NGF) loaded poly (L - lactide) (PLA) scaffolds by means of emulsion freeze drying method to the possibility for the application of the nerve regeneration of spinal cord disease and the degeneration in Alzheimer's disease. The release amount of NGF from NGF loaded PLA scaffold were analyzed over a 4 week period in vitro at phosphate buffered saline (PBS), pH 7.4, at $37^{\circ}C$. It can be observed the open cell pore structure of porous scaffolds and can be easily controlled the pore structure by the controlling of formulation factors resulting in the controlling of the release rate and the release period. The stability of NGF during the preparation of PLA scaffold was evaluated by comparing the released amounts of total NGF, assayed NGF enzyme - linked immunosorbent assay (ELISA). Released NGF has been found to enhance the neurite sprouting and outgrowth from pheochromocytoma (PC-12) cells. These results suggest that the released NGF from NGF loaded PLA scaffold such as conduit type can be very useful for the nerve regeneration in the neural tissue engineering area.

• Korean Journal of Microbiology
• /
• v.34 no.4
• /
• pp.212-218
• /
• 1998

An obligately methylotrophic bacterium which produces extracellular polysaccharide (EPS) was isolated through methanol-enrichment culture technique. The isolate was aerobic, nonmotile, and gram negative rod and exibited catalase, but no oxidase, activity. Plasmid, carotenoid, and poly-${\beta}$-hydroxybutyric acid were not found. The guanine plus cytosine content of DNA was 52-56%. The isolate was found to grow only on methanol and monomethylamine. Growth was optimal ($t_d=2.4h$) at $35^{\circ}C$ and pH 6.5 in a mineral medium containing 0.5% (v/v) methanol, 25 mM phosphate, and 0.212% ammonium sulfate. Methanol was assimilated through the ribulose monophosphate pathway. Maximun amount of EPS was produced in cells growing at the mid-stationary growth phase at $30^{\circ}C$ in a mineral medium (PH 6.5) containing 1.0% (v/v) methanol in the CIN ratio of 54.7. Thin-layer chromatographic and high performance liquid chromatographic analysis revealed that the EPS was composed of glucose and galactose. EPS which was not treated with ethanol (Pbe) exhibited stable viscosity under various concentrations of salts and temperatures hut showed high viscosity at low pH. EPS precipitated with ethanol (Pae) was found to be more stable in viscosity than the Pbe at various salt concentrations, temperatures, and pH. The Pae also exhibited higher viscosity than the Pbe and xanthan gum. Scanning electron microscopy revealed that the lyophilized Pbe and Pae have a multi-layered structure and a structure of thick fibers, respectively.

• Food Science and Preservation
• /
• v.31 no.1
• /
• pp.138-148
• /
• 2024

The production of poly-γ-glutamic acid (γ-PGA) and γ-aminobutyric acid (GABA) was optimized by serial fermentation of Dendropanax morbiferus extract (DME) using Bacillus subtilis HA and Lactobacillus plantarum KS2020. The 1st alkaline fermentation was performed on 60% DME including 2% glucose and 10% monosodium ʟ-glutamate (MSG) as a precursor. The 1^st fermented DME had 57 mg% tyrosine. Consequently, the 2^nd lactic acid fermentation for 5 days increased the tyrosine content of 106 mg%. The mucilage containing γ-PGA showed a high content of 3.50% on the first day of alkaline fermentation and then increased to 4.10% after 2 days. The precursor (MSG) remaining in the 1^st fermented DME was efficiently converted to GABA by the 2^nd lactic acid fermentation in the presence of 5% skim milk, 1.5% glucose and 0.5% yeast extract, resulting in the production of 18.29 mg/mL GABA. The viable cells of lactic acid bacteria increased and indicated 9.49 log CFU/mL on the fermentation for 5 days, and the acidity of co-fermented DME indicated the highest value of 1.55%. Conclusively, the serial fermented DME has multi-functional ingredients containing γ-PGA, GABA, peptides and probiotics.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.2
• /
• pp.77-84
• /
• 2000

Aim to get operation factors, an In-vessel Composting of Wastewater Sludge was operated. The composting equipment is consisted of three chamber, 1st, 2nd and 3rd consequently. In the results, the temperature of fermentation had shown that 1st fermentation chamber(F/C) temperature was higher than that of 2nd and 3rd fermentation chamber. The temperature was steady in all steps during the sludge being composted, the ranges of each step were $50^{\circ}{\sim}59^{\circ}C$ of 1st F/C, $41^{\circ}{\sim}50^{\circ}C$ of 2nd F/C, and $32^{\circ}{\sim}37^{\circ}C$ of 3rd F/C. Organic material content of the end product was 28% and that of pH was 7.5. Properties of the compost which have been composted on optimized condition, were shown that is acceptable to use as a fertilizer. Even in the winter time, the composting system was working well without any trouble. According to result of investigation, the end-product of the system was satisfied with the standard for a fertilizer usage. HRT(hydraulic retention time) of entire process was appropriated to be 14 days(0.9 days at drying and 3.5, 4.4, 5.2 days at each step of fermentations, respectively).

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.05a
• /
• pp.55-55
• /
• 2003

최근 높은 해상도의 평판 디스플레이 장치 특히 차세대 TFT-LCD를 개발하기 위해서는 건식식각공정의 개발이 필수 불가결하며 이는 플라즈마 공정장치의 대면적화가 가능해야 한다. 따라서 산업계는 이러한 제조 조건에 알맞는 대면적 플라즈마 반응기 개발을 추구하고 있다. 이를 위해서는 건식식각공정의 개발이 필수 불가결하며 이를 위해선 플라즈마 공정장 치의 대면적화가 가능해야 한다. 이러한 대면적 공정을 위해서는 낮은 공정압력, 고밀도, 높은 플라즈마 균일도가 요구된다. 또한 이러한 대면적 고밀도 플라즈마에의 적용을 위하여 새로운 유도결합형 플라즈마 소오스의 개발이 진행되고 있으며, 안정적인 300mm웨이퍼 공정을 위하여 여러 형태의 안테나가 연구되어지고 있다. 그러나 차세대 TFT-LCD에 적용 가 능하게끔 기존의 ICP 소오스를 직접적으로 대면적화 하는데 있어서는 안테나의 인덕턴스의 값이 키지며, 유전물질의 두께 증가 및 그에 따른 재료비의 상슴에 의해 그 한계점을 나타 내었다. 본 연구에서는 차세대 TFT-LCD 및 POP 대면적 공정에 적용 가능한 고밀도 플라즈마를 발생시키기 위해서 내장형 유도결합형 선형 안테나를 사용하였다. 내장형 유도결합형 선형 안테나가 가지고 있는 고유의 정전기적 결합효과를 최소화시키기 위해 직사각형모양의 플라즈마 챔버(830mm*1,020mm)에서 영구자석을 사용하였다. 영구자석을 사용하여 외부자 장을 인가하였을 때가, 그럴지 않은 때보다 RF 안테나에 걸리는 코일의 전압을 낮춰주었으며, 영구자석의 배열에 따라 코일의 인덕턴스의 값이 크게 변함을 알 수 있었다. 그리고, 최적화된 자장의 배열은 플라즈마의 이온밀도를 증가시켰으며, 플라즈마 균일도 또한 10% 이 내로 유지됨을 알 수 있었다. 따른 식각 메커니즘에 대하여 알아보고자 하였다. $CF_4/Cl_2$ gas chemistry 에 첨 가 가스로 $N_2$와 Ar을 첨 가할 경 우 텅 스텐 박막과 하부 layer 간의 etch selectivity 증가는 관찰되지 않았으며, 반면에 첨가 가스로 $O_2$를 사용할 경우, $O_2$의 첨가량이 증가함에 따라 etch s selectivity 는 계속적으로 증가렴을 관찰할 수 있었다. 이는 $O_2$ 첨가에 따라 형성되는 WOF4 에 의한 텅스텐의 etch rates 의 감소에 비하여, $Si0_2$ 등의 형성에 의한 poly-Si etch rates 이 더욱 크게 감소하였기 때문으로 사료된다. W 과 poly-Si 의 식각 특성을 이해하기 위하여 X -ray photoelectron spectroscopy (XPS)를 사용하였으며, 식각 전후의 etch depth 를 측정하기 위하여 stylus p pmfilometeT 를 이용하였다.X> 피막이 열처리 전후에 보아는 기계적 특성의 변화 양상은 열역학적으로 안정한 Wurzite-AlN의 석출에 따른 것으로 AlN 석출상의 크기에 의존하며, 또한 이러한 영향은 $(Ti_{1-x}AI_{x})N$ 피막에 존재하는 AI의 함량이 높고, 초기에 증착된 막의 업자 크기가 작을 수록 클 것으로 여겨진다. 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로