• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.637-640
• /
• 2008

The properties of oriented poly(3-hexylthiophene-2,5-diyl) in field effect transistors (FETs) have been investigated through mechanical stretching process as the original. Silicon-based FETs shown high mobility of $0.02\;cm^2/V$ s after thermal treatment and $0.0092\;cm^2/V$ s at r.t. PET-based FETs were expected to show a similar performance in mobility to that of silicon-based FETs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.308-311
• /
• 2000

The organic electroluminescene (EL) device has gathered much interested because of its potential in materials and simple device fabrication. We fabricated EL device which have a mixed single emitting layer containing N,N'-diphenyl-N,N'-(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine [TPD] and poly(3-hexylthiophene) [P3HT]. The molar ratio between P3HT and TPD chaged with 1:1, 3:1, 5:1, 3:2 and 5:2. EL intensity of ITO/P3HT+TPD/Mg:In devices is enhanced by addition of TPD into P3HT. This can be explained that the energy transfer occurs from TPD to P3HT. Recombination probability increases in emitting layer because that TPD as hole transport material plays a role more injection hole and Mg:In (3.7eV) electrode has low work function make easily electron injection. ITO/P3HT+TPD(5:2)/Mg:In devices emit orange-red light at 28V.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권1호
• /
• pp.81-85
• /
• 2015

본 연구에서는 Poly (3-hexylthiophene-2,5-diyl) (P3HT):[6,6]-Phenyl C61 butyric acid methyl ester (PCBM)과 GaN를 이용하여 유무기 하이브리드 광전변환소자를 제작함에 있어서, P3HT:PCBM 활성층의 열처리가 소자의 단락전류밀도에 미치는 영향을 알아보았으며 이때 유기물의 농도와 혼합비율을 달리 하였다. 유기물 각각의 층을 코팅하여 층을 만들 때마다 열처리 한 경우, 즉 pre-annealing샘플과 pre-annealing 과정을 거쳐 제작된 소자 전체를 한 번 더 열처리하여 즉 post-annealing까지 행한 샘플을 비교하였다. 그 결과 post-annealing한 샘플이 더 높은 단락전류밀도의 값을 가졌고 이때 P3HT와 PCBM은 1wt%와 1:1 혼합비율에서 좋은 열처리 효과를 나타내었다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권5호
• /
• pp.237-240
• /
• 2012

A conducting polymer, poly 3-hexylthiophene (P3HT) is characterized with the metal-insulator-semiconductor (MIS) measurement method and the high frequency planar circuit method. From the MIS measurement method, the relative dielectric constant of the P3HT film is estimated to be 4.4. For the high frequency planar circuit method, a coplanar waveguide is fabricated on the P3HT film. When applying +20 V to the CPW on P3HT film, the P3HT film is in accumulation mode and becomes lossy. The CPW on P3HT film is 1.5 dB lossier than the CPW on $SiO_2$ film without P3HT film at 50 GHz.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1491-1494
• /
• 2014

High-crystallinity poly(3-hexylthiophene) (P3HT) thin films were prepared by aging the precursor solutions, prepared using a good solvent, chloroform, at low temperatures prior to spin-casting. Lower solution temperatures significantly improved the molecular ordering in the spin-cast P3HT films and, therefore, the electrical properties of field-effect transistors prepared using these films. Solution cooling enhanced the electrical properties by shifting the P3HT configuration equilibrium away from random coils and toward more ordered aggregates. At room temperature, the P3HT molecules were completely solvated in chloroform and adopted a random coil conformation. Upon cooling, however, the chloroform poorly solvated the P3HT molecules, favoring the formation of ordered P3HT aggregates, which then yielded more highly crystalline molecular ordering in the P3HT thin films produced from the solution.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.3107-3110
• /
• 2012

• 전자공학회논문지 IE
• /
• 제43권1호
• /
• pp.1-4
• /
• 2006

중합 박막 트랜지스터의 특성은 유기 반도체에 앞서 게이트유전체 표면의 화학적 변형에 의해 조절 가능하다. 화학적 처리는 자기조립 단분자막 형태의 유전물질과 함께 파생된 tantalum pentoxide($Ta_2O_5$) 표면으로 구성된다. Octadecyl trichlorosilane(OTS), hexamethyldisilazane (HMDS), aminopropyltreithoxysilane(ATS) 자기조립 단분자막의 성장은 중합체로 결합된 poly-3-hexylthiophene(P3HT)의 분위기에서 $0.01\sim0.06cm2/V{\cdot}s$의 이동도로 진행되었다. 이동도 향상 메커니즘은 중합체와 자기조립 단분자막 사이의 분자 상호작용에 영향을 미치는 것으로 확인하였다. 이는 향후 ploymer TFT의 유전박막 중 하나로서 유용하게 사용 될 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.374-377
• /
• 2001

We have synthesized poly(3-hexylthiophene)(P3HT), which is the most famous conducting polymer and studied the optical properties of P3HT. And then fabricated the device using P3HT as an emitting layer. For the improve of hole injection from ITO electrode to P3HT emitting layer, we use transparent polyaniline(PANI) electrode. In the voltage-current-luminance characteristics of ITO/PANI/P3HT/LiF/Al device which use the PANI film synthesised during 5 cycle, the device turn on at the 2V and the luminance of $218nW/cm^{2}$ obtained at 12V. External quantum efficiency of ITO/PANI/P3HT/LiF/Al increased at 8V than that of ITO/P3HT/LiF/Al device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.374-377
• /
• 2001

We have synthesized poly(3-hexylthiophene)(P3HT), which is the most famous conducting polymer and studied the optical properties of P3HT. And then fabricated the device using P3HT as an emitting layer. For the improve of hole injection from ITO electrode to P3HT emitting layer, we use transparent polyaniline(PANI) electrode. In the voltage-current-luminance characteristics of ITO/PANI/P3HT/LiF/Al device which use the PANI film synthesised during 5 cycle, the device turn on at the 2V and the luminance of 218 nW/$\textrm{cm}^2$ obtained at 12V. External quantum efficiency of ITO/PANI/P3HT/LiF/Al increased at 8V than that of ITO/P3HT/LiF/Al device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.263-266
• /
• 1999

Electrolunlinescent devices based on conjugated polymer emitting materials have been much attracted possible applications for multicolor flat panel display, since the conjugated polymers have a small band gap emitting obtained at a low driving voltage. In this paper, we fabricated the single layer EL device using poly(3-hexylthiophene) as emitting material Electroluminescence(EL) and I-V-L characteristics of indium-tin-oxide[ITO]P3HT/AI device with a various thickness were investigated. It was demonstrate that the I-V characteristics depend, not the voltage but the electric- field strength, The current is dependent on the electric filed and not on the applied voltage, indicating that the carriers are injected by a tunneling process. In the device, the barrier to hole injection is only 0.5eV and the barrier to electron injection is 1.5eV.