• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.29-32
• /
• 2001

Conductive polymers(CPs) are a relatively new class of organic materials displaying as their foremost property a high conductivity combined with very light weight, flexibility and reasonably facile processability[1]. Due to their high conductivity/weight ratio, they have recently evinced much interest in potential application as EMI shielding screens, coatings or jackets for flexible conductors, rechargeable batteries and as possible substitutes for metallic conductors or semiconductors in wide variety of electrical devices[2]. (omitted)

• 센서학회지
• /
• 제6권3호
• /
• pp.214-220
• /
• 1997

본 연구에서는 생화학 물질을 정량적으로 분석하기 위하여 소산장(Evanescent field) 흡수를 이용한 박막 광도파로형 칼륨이온센서를 제작하였다. 도파로는 Pyrex glass($26{\times}19{\times}1mm$, $n_{1}=1.485$ at 514nm, Ar laer ; Coherent 사 M532) 기판위에 RF sputtering법으로 Coming-7059 glass($n_{2}=1.588$, at 514nm, Ar laer ; Coherent사 M532) 2 종류의 박막 광도파로를 형성하였으며, 그 두께는 프리즘 결합법으로 측정한 결과 각각 $T_{1}=1.04{\mu}m$ 와 $T_{2}=1.41{\mu}m$ 였다. 칼륨이온 선택성의 이온감지막은 변색성 이온감응물질인 ETH 5294와 중성이온감응물질인 valinomycin을 poly(vinyl chloride-co-vinyl acetate-co-vinyl alcohol) ( 91 : 3 : 6 ) 공중합체 막내에 포괄법으로 고정화한 후 도파로 위에 스핀코팅법으로 제조하였다. 그리고, 센서의 특성을 평가하기 위해 감지막의 작용길이, 도파로의 두께 및 변색성 이온감응물질의 조성비 변화에 따른 감도 의존성을 조사하였다. 본 센서는 약 $1{\times}10^{-6}M\;{\sim}1.0\;M$의 넓은 측정범위를 가지며, 90%의 응답시간은 약 1분 이내의 빠른 응답특성을 나타내었다. 또한 분광분석법에 의한 투과광도법 및 광섬유를 이용한 optode형 센서를 제작하여 본 센서와 그 특성을 비교한 결과, 본 센서의 우수성을 알 수 있었다. 따라서 본 센서는 생화학 및 의용, 환경감시 분야 등에 응용 가능할 것으로 사료된다.

• 멤브레인
• /
• 제14권3호
• /
• pp.258-262
• /
• 2004

Trifluoroethyl methacrylate (TFEMA)는 발수발유용 특수도료나 광섬유의 외관에 중요하게 쓰여지는 코팅제에 쓰여지는 산업적으로 중요한 단량체로, 주로 산촉매 하에 trifluoro ethanol (TFEA)와 methacrylic acid (MA)의 에스테르화 반응에 의해 제조된다. 이러한 TFEMA의 제조에 투과증발막의 적용가능성을 알아보기 위한 선행연구로서, 상용화된 폴리비닐알콜계 투과증발막(GFT Membrane $Pervap^{\circledR}1005$)을 대상으로 반응물의 하나인 trifluoroethanol (TFEA)을 대상으로 온도와 농도의 변화에 따른 투과증발실험을 실시하였다. 투과증발실험 결과 TFEA 농도가 90에서 99 wt%로 높아질수록 투과용액 내의 물의 감소에 기인한 전체투과량은 감소하였다. TFEA/물 선택도는 95 wt% TFEA 농도까지는 높아지는 경향을 보였지만 97 wt%부터 감소하여 99 wt%에서는 급격히 감소하였다. 운전온도가 상승함에 따라 투과도의 증가와 더불어, 선택도도 증가하는 경향을 보였다. 적용된 TFEA 농도와 운전온도의 범위에서 GFT막은 물에 대한 우수한 투과도와 선택성을 보였다. 이러한 TFEA/물 혼합용액에 대한 높은 탈수성능은 GFT 투과증발막이 TFEMA의 에스테르화 막반응기에 적용될 수 있음을 확인시켜 주었다.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.187-193
• /
• 2010

The effects of molecular weight (MW) and concentration on the rheological properties of poly(vinyl alcohol) (PVA) solutions in dimethyl sulfoxide (DMSO) were investigated at $30^{\circ}C$. Ubbelohde viscometer and rotational rheometer were employed for dilute and concentrated regime, respectively. In the dilute regime, the Mark-Houwink exponent ($\alpha$) of the solutions determined from three different MWs proved 0.73. The critical concentration (C*), in which the entanglement and overlap of polymer molecules began to take place, decreased with increasing the MW of PVA. Huggins constant ($K_H$) values ranged from 0.33 to 0.45 over the MW examined. In the log-log plot of $\eta_{sp}$ versus [$\eta$]C, the PVA with higher degree of polymerization (DP) gave a greater slope exhibiting the inflection point in the vicinity of C*. In the dynamic viscosity ($\eta'$) curve, the PVA solutions of DP 1700 presented Newtonian fluid behavior over most of the frequency range examined. However, the lower Newtonian flow region reduced with increasing the DP. As the PVA concentration increased, $\eta'$ was increased and the onset shear rate for pseudoplasticity was decreased. In the Cole-Cole plot, PVA solutions showed almost a single master curve in a slope of ca. 1.65 regardless of the DP. However, the increase of the concentration from 8 to 12 wt% for PVA solutions of DP 5000 decreased the slope from 1.73 to 1.57. In the tan $\delta$ curve, the onset frequency for sol-gel transition was shifted from 154 to 92 rad/s with increasing the DP from 3300 to 5000 and from 192 to 46 rad/s with increasing the concentration from 8 to 12 wt%. In addition, longer relaxation time ($\lambda$) was observed with increasing the DP and concentration.

• 한국염색가공학회지
• /
• 제28권3호
• /
• pp.125-133
• /
• 2016

In this study, efforts were made to enhance the mechanical properties of the poly(vinyl alcohol) (PVA) fibers of medium molecular weight(number-average degree of polymerization=1735) varying the ratio in $DMSO/H_2O$ mixed solvent and spinning/drawing conditions. The gel fibers prepared from pure DMSO were opaquely frozen in the coagulating bath of $-20^{\circ}C$. However, transparent gel fibers were formed without freezing for the mixture to contain water less than 80wt%. As the amount of water in the mixture increased the residual solvent in the coagulated gel fibers decreased ranging from 85 to 42wt%. The complex viscosity increased with increasing PVA concentration in 80/20 $DMSO/H_2O$ exhibiting remarkable shear thinning at 18wt%. In the Cole-Cole plot, the 18wt% PVA solutions gave a deviated curve from 12 and 15wt% ones. Thus the optimum PVA concentration for the spinning processing of medium MW PVA solutions in 80/20 $DMSO/H_2O$ was determined to 18wt% with rheological concept. Low degree of drawing during hot drawing process in the dry state was available for high bath draft in the coagulation bath. The most improved mechanical properties were observed by applying the highest possible draw ratio attained by reducing bath draft over multi-step drawing process. In the given bath draft, linear relationship was observed between both tensile strength and modulus and draw ratio showing the inflection points at the draw ratio of 19.5 and 18.0 for tensile strength and modulus, respectively.

• 한국염색가공학회지
• /
• 제34권1호
• /
• pp.20-26
• /
• 2022

Centrifugal spinning is an emerging technique for fabricating micro-to-nano-fibers in recent years. To obtain fibers with the desired size and morphology, it is necessary to configure and optimize the parameters used in centrifugal spinning. In this study, it was controlled by changing the solution's concentration (7.5, 10, and 12.5 wt.%) and disk's rotational velocity (6,000, 8,000, and 10,000 rpm) to prepare centrifugal spun nano-filter. The morphological property, air permeability, and dust collection efficiency of the PVA/PP bi-layer nanoweb prepared by centrifugal spun PVA on the PP micron nonwoven substrate are studied using a field emission scanning electron microscope, an air permeability tester, and a filter tester equipment, and the analysis results indicate that it is suitable as a nano-filter when the concentration of PVA solution is 10 wt.% and the rotational velocity of the disk is 8,000 rpm. The resultant reduced diameter and uniform fibers also proved that an excellent dust collection efficiency filter could be made.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.65-66
• /
• 2023

Recently, the importance of improving air quality has been greatly highlighted due to environmental problems such as indoor air pollution, and efforts are being made to improve indoor air quality not only in Korea but also around the world. In this situation, this study aims to study the physical properties of cement boards using pearlite with excellent physical adsorption performance due to micropores in materials, expanded graphite that is widely used as a flame retardant to prevent heat transfer in the event of a fire. The experimental items are bending fracture load and impact resistance. The bending destruction load at the fiber mixing rates 1, 2, 3, and 4 (%) did not meet the standard 140N, but the bending destruction load at 5% was 168.2N, and the impact resistance of the fiber mixing rates 1 and 2 (%) could not be measured due to cracks and damage, and the impact resistance at 3, 4, and 5 (%).

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.56-60
• /
• 2015

Discontinuous, polycrystalline $Al_2O_3$-dispersed TZP fibers were prepared by the centrifugal spinning of a colloidal $ZrO_2$ sol containing Y and Al nitrates and poly(vinyl alcohol). Factors affecting the rheological properties of the sols, such as sol concentrations, aging, and the amounts and types of additives, were investigated by measuring the shear viscosities. The flow characteristics of the sols were studied in relation to the spinnability by measuring the viscosity with respect to the shear rate. The spinnability was obtained through the addition of a polymer which increases the viscosity to a range of optimum viscosity values for spinning. Aging the sols containing the additives did not noticeably change the sol viscosities at room temperature up to 30 days. The flow behavior of the spinnable sols progressively changed from nearly Newtonian to pseudoplastic with an increase in the sol concentration.

• Macromolecular Research
• /
• 제13권5호
• /
• pp.385-390
• /
• 2005

The electrospinning process is a fascinating method to fabricate small nanosized fibers of diameter several hundred nanometers. Surfactant-polymer solutions were prepared by adding poly(vinyl alcohol) (PVOH) to distilled water with cationic, anionic, amphoteric, and non-ionic surfactants. Average diameter of the electrospun PVOH fibers prepared from PVOH solution was over 300 nm, and was decreased to 150 nm for the mixture of PVOH/amphoteric surfactant. To explain the formation of ultra fine fiber, the characteristic properties in a mixture of PVOH/surfactant such as surface tension, viscosity, and conductivity were determined. In this paper, the effect of interactions between polymers with different classes of surfactants on the morphological and mechanical properties of electrospun PVOH nonwoven mats was broadly investigated.

• Structural Engineering and Mechanics
• /
• 제5권4호
• /
• pp.355-368
• /
• 1997

Fiber reinforced plastic (FRP) rods are used as reinforcement (prestressed or not) to concrete. FRP composites can also be combined with steel to form hybrid reinforcing rods that take advantage of the properties of both materials. In order to effectively utilize these rods, their bond behavior with concrete must be understood. The objective of this study is to characterize and model the bond behavior of hybrid FRP rods made with epoxy-impregnated aramid or poly-vinyl alcohol FRP skins directly braided onto a steel core. The model closely examines the split failure of the concrete by quantifying the relationship between slip of the rods resulting transverse stress field in concrete. The model is used to derive coefficients of friction for these rods and, from these, their development length requirements. More testing is needed to confirm this model, but in the interim, it may serve as a design aide, allowing intelligent decisions regarding concrete cover and development length. As such, this model has helped to explain and predict some experimental data from concentric pull-out tests of hybrid FRP rods.