• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.769-770
• /
• 2009

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.269-272
• /
• 2007

In this study, we investigated the effects of electron beam irradiation on the rheological properties of PLA for enhancing processability. The electron beam was irradiated onto the pure PLA, chemically modified PLA by reactive extrusion, and PLA containing functional monomer. The complex viscosity and log G'vs. log G" plot among dynamic rheological properties were chosen for comparison. The complex viscosity of irradiated pure and chemically modified PLA decreased significantly due to de-gradation of PLA molecules with increasing the E-beam dosages. Complex viscosity of irradiated PLA with functional monomer showed maximum value at moderate dosage, while at high dosage the complex viscosity was decreased by a prolonged irradiation.

• Composites Research
• /
• v.22 no.3
• /
• pp.18-28
• /
• 2009

Blends of poly(lactic acid) (PLA) and poly(butylene terephthalate) (PBT) were prepared by reaction extrusion with para-phenylene diisocyanate (PPDI). The crystallization behavior and biodegradability were investigated by using a differential scanning calorimeter (DSC), a wide angle X-ray diffractometer (WAXD), a contact angle goniometer, and a buffer solution containing esterase. The addition of PBT into PLA polymer matrix induced the cold crystallization of PLA phase, and the crystallization rate of PLA phase was significantly accelerated when both PBT and PPDI participated in the reaction with PLA simultaneously. But the chain extension caused by PPDI decreased the crystallinity and hydrophilicity of PLA and PBT phases. The crystallinity and hydrophilicity did not affect the biodegradability of PLA/PBT blends. However, phase separation between PLA and PBT in PLA/PBT blends increased the interfacial area exposed to the hydrolysis of enzyme, resulting in the improved degradability rate of PLA phase. In contrast, the improved interfacial adhesion between PLA and PBT matrices by the reaction with PPDI reduced the area exposed to the enzyme to decrease the degradation rate of PLA phase.

• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.164-168
• /
• 2009

The effects of chemically modified thermoplastic starch (CMPS) on the morphology, thermal and mechanical properties of the blends of poly (lactic acid)(PLA) and poly(butylene adipate-co-terephthalate)(PBAT) were studied. Blends of PLA/PBAT with the CMPS contents of 10, 20 and 30 wt% on the basis of PLA/PBAT weight were prepared by a twin screw extruder. The morphology, thermal and mechanical properties of the blends were examined by using scanning electron microscope (SEM), differential scanning calorimeter (DSC) and a tensile tester. The DSC study revealed that PLA/PBAT blends are thermodynamically immiscible, while the compatibility was much improved by addition of the CMPS.

• Membrane Journal
• /
• v.16 no.2
• /
• pp.85-105
• /
• 2006

Poly(lactic acid) is a linear aliphatic thermoplastic polyester, produced by the ring-opening polymerization of lactides and the lactic acid monomers, which are obtained from the fermentation of sugar feed stocks, corn, etc. PLA has high mechanical, thermal plasticity, fabric-ability, and biocompatibility, So PLA is a promising polymer far various end-use applications. In recent time, the intercalation of polymers from either solution or the melt in the silicate galleries of clay is the best technique to prepare nanocompoiste material which often exhibit remarkable improvement of mechanical, thermal, optical and physicochemical properties when compared with the pure polymer or conventional composites. Layered silicate is naturally abundant, economic, and more importantly benign to the environment.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.2_1
• /
• pp.79-89
• /
• 2021

Poly(lactic acid) (PLA) is considered as one of the most promising bio-based polymers due to its high strength, high modulus, good processability, transparency after processing, and commercial availability. This study aimed to investigate the mechanical, thermal, and migration properties of poly(lactic acid)/zeolite (10 phr) composites prepared with various biocompatible plasticizers, such as triethyl citrate(TEC), tributyl citrate(TBC), and poly(ethylene glycol)(PEG400), through differential scanning calorimetry(DSC), thermo-gravimetric analysis(TGA) and standard tensile testing. The incorporation of PEG400 significantly increased the elongation at break, and DSC results showed that the addition of plasticizers drastically decreased the T_g of PLA/zeolite composites and improved the melt flow and processability. Besides, it was found from TGA results that PLA/zeolites composites plasticized by TEC and TBC were more easily to be thermally degraded than the composites plasticized by PEG400.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.914-920
• /
• 2015

In this paper, the crystal structure and the crystallinity of PLA(PolyLactic Acid) were studied. PLA is a eco-friendly thermoplastic which completely decomposed by microorganisms, but has low thermal stability and low degree of crystallinity. The low crystallization rate makes the cycle time of injection molding longer and the degree of crystallinity lower. It is a very big disadvantage comparing the other thermoplastics. We improved the degree of crystallinity and the crystallization rate by introducing nucleating agents and plasticizer, and discussed the mechanism.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.232-239
• /
• 2014

Poly(lactic acid)(PLA) nanocomposites containing various nanofillers were synthesized using the solution intercalation method. Organically modified bentonite clay (NSE), octadecylamine-graphene oxide (ODA-GO), and an NSE/ODA-GO complex were utilized as nanofillers in the fabrication of PLA hybrid films. PLA hybrid films with varying nanofiller contents in the range of 0-10 wt% were examined and compared in terms of their thermomechanical properties, morphologies, and oxygen permeabilities. Transmission electron microscopy (TEM) confirmed that most of the NSE and ODA-GO nanofillers were dispersed homogeneously throughout the PLA matrix on the nanoscale, although some agglomerate NSE/ODA-GO complex particles were also formed. Among the three nanofillers for PLA hybrid films, the NSE/ODA-GO complex showed the best improvement in film thermal stability. In contrast, NSE and ODA-GO exhibited the best improvement in tensile mechanical properties and oxygen barrier properties of the PLA hybrid films, respectively.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.1
• /
• pp.13-22
• /
• 1996

Poly(D,L-lactic acid) (PLA) microspheres containing alprazolam(APZ) were prepared by a solvent-emulsion evaporation method and their release patterns were investigated in vitro. Various batches of microspheres with different size and drug content were obtained by changing the ratio of APZ to PLA, PLA concentration in the dispersed phase and stirring rate. Rod-like APZ crystals on microsphere surface, which were released rapidly and could act as a loading dose, were observed with increasing drug content. The release rate was increased with increase in drug contents and decrease in the molecular weight of PLA. The release rate of APZ for long-acting injectable delivery system in vitro, which would aid in predicting in vitro release profile, could be controlled by properly optimizing various factors affecting characteristics of microspheres.

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.257-258
• /
• 2007

See Full Text