• Elastomers and Composites
• /
• v.39 no.4
• /
• pp.318-323
• /
• 2004

Cloud-point and bubble-point curves for poly(ethylene-co-13.8 mol% octene) ($PEO_{13.8}$) and Poly(ethylene-co-15.3 mol% octene) ($PEO_{15.3}$) were determined up to $150^{\circ}C$ and 450 bar in hydrocarbons which have different molecular size and structure. Whereas ($PEO_{15.3}$+ n-pentane) system has cloud-point and bubble-point type transitions, ($PEO_{15.3}$+ n-propane) and ($PEO_{15.3}$+ n-butane) systems do only cloud-point type transition. In cyclo-pentane, -hexane, -heptane, and -octane, $PEO_{15.3}$ has a bubble-point transition. ($PEO_{13.8}$+ n-butane) mixture has a critical mixture concentration at 5 wt% PEO. (PEO + hydrocarbon) mixtures exhibit LCST type behavior. Solubility of PEO increases with hydrocarbon size due to increasing dispersion interaction which is favorable to dissolve PEO.

• Elastomers and Composites
• /
• v.41 no.2
• /
• pp.116-124
• /
• 2006

Cloud-point data to $160^{\circ}C$ and 1,000 bar are presented with poly(ethylene-co-15.3 mole% octene) copolymers ($PEO_{15}$) in pure 1-octene and mixtures of ethylene - 1-octene. The cloud-point curves for $PEO_{15}$ - ethylene - 1-octene mixture dramatically increase in pressure to as high as 1,000 bar with an increasing ethylene concentration. At ethylene concentrations less than 18 wt%, the ternary mixture has bubble- and cloud-point curves. As the ethylene concentration of the ternary mixture increases, the bubble-point curve and the single-phase region reduce. The reduction in the single phase region with increasing ethylene concentrations is the result of reduced dispersion interactions between $PEO_{15}$ and the mixed solvent. The single-phase region decreases with increasing temperatures when ethylene concentrations are lower than 36 wt%, whereas the single-phase region increases with temperatures at ethylene concentrations greater than 50 wt%. At ethylene concentrations greater than 50 wt% the effect of the polar interactions of the mixed solvent, which is unfavorable to dissolve PEO, is greater than the effect of the density of the mixed solvent. Therefore, the cloud-point pressures increase with a decreasing temperature. However, at ethylene concentrations less than 50 wt%, the cloud-point pressures decrease with temperature, because the effect of the polar interactions is less than the density effect.

• Elastomers and Composites
• /
• v.46 no.3
• /
• pp.251-256
• /
• 2011

Effect of poly(propylene-co-octene) as a compatibilizer in toughened polypropylene/ poly(ethylene-co-octene) (EOC) was investigated. The EOCs used were metallocene catalyzed commercial linear low density polyethylene and they are elastomeric materials. The poly(propylene-co-octene) was synthesized by metallocene catalyst in our laboratory to be used as a compatibilizer in PP/EOC blends. PP/EOC blends without compatibilizer shows very low mechanical properties in specimens with weldlines while incorporation of a compatibilizer significantly increases the mechanical properties of specimens with weldlines. However, compatibilized PP/EOC blends does not show increased impact property in a weldline free specimen and it is attributed to low molecular weight of the poly(propylene-co-octene) synthesized in present study. It is expected that the poly(propylene-co-octene) having increased molecular weight provides very good performance as an effective compatibilizer in toughened polypropylene/EOC blends.

• Elastomers and Composites
• /
• v.38 no.1
• /
• pp.51-56
• /
• 2003

Cloud-point and bubble-point data to $170^{\circ}C$ and 50 bar are presented for four different solvents, normal pentane. n-hexane, n-heptane, and n-octane with poly(ethylene-co-42 wt% octene) ($PEO_{42}$) copolymer. The pressure-concentration isotherms measured for $PEO_{42}$ - normal pentane have maximums at around 5 wt% of the copolymer concentrations in the solution. $PEO_{42}$- normal pentane system exhibits LCST-type phase behavior at temperatures greater than $130^{\circ}C$. Below $120^{\circ}C$, bubble-point type transitions are observed. However, the binary mixtures for $PEO_{42}$ in n-hexane, n-heptane, and n-octane have only bubble-point type transitions at the pressure-temperature region investigated in this study. The single-phase region of PEO - alkane mixtures increases with the molecular size of alkane solvent due to the increasing dispersion interactions between PEO and the alkane.

• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.277-283
• /
• 2005

LV transition curves for poly(ethylene-co-15.3 mol% octene) ($PEO_{15}$) and poly(ethylene- co-17.0 mol% octene) ($PEO_{17}$) were measured in cyclo-pentane and cyclo-hexane. Between $40{\sim}150^{\circ}C$, the LV curve for ($PEO_{15}$ + cyclo pentane) located $1.1{\sim}2.7$ bar higher than that for ($PEO_{17}$+ cyclo-pentane). In cyclo-hexane, similar behavior was observed for $PEO_{15}$ and $PEO_{17}$ solution except the pressure difference reduced to $0.9{\sim}l.6$ bar. If the backbone structure of $PEO_{15}$ were identical to that of $PEO_{17}$, the LV line for $PEO_{17}$ would locate at high pressures than that for $PEO_{15}$, since the number average molecular weight of $PEO_{17}$ (Ave. Mn=153,040) is 1.9 times higher 4han that of $PEO_{15}$ (Ave. Mn=82,200). The difference in the octene comonomer content between $PEO_{15}$ and $PEO_{17}$ is only 1.7 mole%, nevertheless this small difference in the backbone structure of the PEO greatly affected the location of the L-V curves in the mixtures comprised of PEO and cyclo-alkane.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.438-442
• /
• 2011

Mechanical and morphological properties of poly(acrylonitrile-butadiene-styrene) (ABS) and poly(lactic acid) (PLA) blends containing compatibilizers were investigated. Poly(styrene-acrylonitrile)-g-maleic anhydride) (SAN-g-MAH), poly(ethylene-co-octene) rubber-maleic anhydride (EOR-MAH) and poly(ethylene-co-glycidyl methacrylate) (EGMA) were used as compatibilizers. Mechanical properties such as tensile, flexural and impact strengths of ABS/PLA (80/20, wt%) blends were found to be increased when the SAN-g-MAH, EOR-MAH and EGMA were used. The maximum values for mechanical properties of the ABS/PLA (80/20) blend were observed when SAN-g-MAH was used as a compatibilizer at the concentration of 3 phr. From morphological studies of the ABS/PLA (80/20) blends, PLA droplet size was decreased by the addition of the compatibilizers used in this study. From the results of mechanical and morphological properties of the ABS/PLA (80/20) blends, SAN-g-MAH (3 phr) was found to be the most effective compatibilizer among the compatibilizers used in this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.3108-3113
• /
• 2013

Compatibility between mLLDPE and HDPE was investigated by observing the crystallization behavior and mechanical properties of their blends. HDPE and mLLDPE blends were prepared by a melt-blending with compositions of 100/0, 80/20, 60/40, 40/60/ 20/80 and 0/100. Four different mLLDPEs containing various octene contents (4.1, 6.8, 9.8 및 12.5 mol.%) were investigated. The melting temperature and crystallization peak temperature of the blends were measured by DSC and the mechanical properties were measured in an universal testing machine. By observation that the melting and crystallization peak temperatures of one component were affected by its counterparts, it was revealed that HDPE and mLLDPE are miscible or at leat partially miscible at molten state. It was also found that the crystalline phase of mLLDPE contains HDPE crystals. However. it was not clear that mLLDPE was cocrystalized in the crystalline phase of HDPE. By various investigation with DSC and mechanical properties, it was concluded that the compatibility between mLLDPE and HDPE decreases with the octene content in the mLLDPE.