• Journal of Radiation Industry
• /
• v.7 no.2_3
• /
• pp.141-147
• /
• 2013

The simple and facile radiation technique of the preparation of antibacterial biodegradable polymer films containing silver nanoparticles (Ag NPs) was described. The biodegradable poly(butylene adipate-co-terephthalate) (PBAT) films containing silver trifluoroacetate (Ag TFA) were prepared by a solvent casting method, and then the films were irradiated by electron beams at the various doses ranging from 20 to 200 kGy to form Ag NPs in the biodegradable polymers. The results of UV-vis and FE-SEM/EDX analyses revealed that the Ag NPs were successfully formed in the PBAT matrix during the electron beam irradiation, and their amounts were dependant on the absorbed dose and Ag TFA concentrations. Furthermore, on the basis of the results of the antibacterial test through disk diffusion and colony counting test, the irradiated PBAT/Ag TFA films exhibited the antibacterial property due to the formation of Ag NPs.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.11
• /
• pp.1071-1076
• /
• 2000

Temperature dependent data of 13C spin-lattice relaxation times and NOE factors for methylene carbons at 50.3MHz and 125.5 MHz have been used to probe the local chain dynamics of poly(butylene terephthalate) (PBT) in solution phase. The interpretation of the relaxation data for methylene chain carbons in PBT was attempted on the basis of several proposed motional models, among which the DLM model was found to be superior. Analysis based on the DLM model indicated that the motion of the $OCH_2groups$ was more restricted compared with the central methylene carbon, which is consistent with conclusions from solid state experiments reported by other investigators. Librational amplitudes of terminal and central carbon of PBT were estimated to be $29.84^{\circ}$ and $32.01^{\circ}respectively.

• Proceedings of the Korean Fiber Society Conference
• /
• 1994.10a
• /
• pp.88-88
• /
• 1994

• Proceedings of the Korean Fiber Society Conference
• /
• 1995.10a
• /
• pp.77-77
• /
• 1995

• Proceedings of the Korean Fiber Society Conference
• /
• 1995.10a
• /
• pp.76-76
• /
• 1995

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.22-27
• /
• 2006

The effect of transesterification on the rheological property of poly(ethylene naphthalate)/poly(butylene tore-phthalate) (PEN/PBT) blends has been investigated. The melt viscosity of PEN/PBT blends decreased with increasing PBT content due to the relatively low melt viscosity of PBT as well as introducing ransesterification between PEN and PBT Further melt viscosity decrease was achieved by the thermal annealing which caused both the chain scission and the acceleration of transesterfication. Calcium stearate (CaST) was applied as a lubricant in order to lower the melt viscosity of PEN and it was found that CaST was acting as the catalyst of transesterification as well. In general, reactive melt blending of PEN and PBT by transesterification resulted in the decrease of molecular weight of PEN and PBT, as a result, the loss of mechanical properties in PEN/PET blend was inevitable.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.437-442
• /
• 2016

A new route for PBT (Poly butylene terephthalate) production from recycled PET (Poly ethylene terephthalate) has been explored. The route consists of glycolysis of PET (Poly ethylene terephthalate) wastes using 1,4-butandiol into BHBT oligomers and polycondensation of the oligomers into PBT oligomer. This process uses post-consumer or post-industrial recycled PET and converts it into high-end PBT type engineering thermoplastic via a chemical recycling process. Zink acetate was used as a catalyst for both glycolysis and polycondensation. Two types of reactor for the glycolysis, batch and semi-batch reactor, were investigated and their performances were compared. Semi-batch reactor removes ethylene glycol (EG) and THF (tetrahydrofuran) during the reaction. Amounts of EG and THF generated during the glycolysis reaction were measured and used as criteria for the reactor performance. Performance of semi-batch reactor was shown to be better than that of batch reactor. Optimum reaction condition for the semi-batch reactor was BD/PET ratio of 4, and reaction temperature of $220^{\circ}C$, giving high EG yield (max 91%) and low production of THF. In addition, it was confirmed that the molecular weight of PBT oligomer increases in accordance with the progress of the polycondensation reaction.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.2
• /
• pp.85-90
• /
• 2021

The gamma irradiation was on to Poly(butylene sebacate-co-terephthalate) (PBSeT), Poly(butylene adipate-co-terephthalate) (PBAT), Poly(lactic acid) (PLA) and casting polypropylene (CPP) at dose levels from 0 to 50 kGy. The properties of gamma irradiated samples were analyzed using DSC, TGA, UTM and FT-IR spectra. The mechanical and thermal properties of PBSeT and PBAT after gamma irradiation were less affected than CPP. The tensile strength and elongation of PBSeT was not affected by gamma irradiation, while these of PBAT, PLA and CPP were significantly decreased at 50 kGy gamma-ray dose. The thermal stability of PBSeT, PBAT, PLA and CPP showed a similar tendency to tensile strength. The glass transition temperature(T_g) and melting temperature(T_m) of PBSeT and PBAT were not altered by increasing gamma-ray dose, while these of PLA and CPP decreased. The chemical composition of all samples was not modified by gamma irradiation, and it was confirmed by FT-IR spectra. Based on mechanical and thermal stability studies of gamma irradiation on bioplastics, tested biodegradable packaging materials showed a potential to be used in sterilization process up to 35 kGy.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.04b
• /
• pp.51-54
• /
• 2001

• Journal of Environmental Science International
• /
• v.26 no.1
• /
• pp.79-85
• /
• 2017

Multi-Walled Carbon Nanotubes (MWCNTs) were modified with epoxy and aminosilane diethanolamine (DEA), and nanocomposites of poly(butylene adipate-co-terephthalate) (PBAT) and the modified MWCNTs were prepared with the aim of improving the physical properties of biodegradable PBAT. The physical and the thermal properties of the PBAT/MWCNT nanocomposites were investigated using various techniques. Fourier transform infrared spectroscopy measurements revealed that the MWCNTs were efficiently modified with DEA. Scanning electron micrographs of the nanocomposites indicated that the modified MWCNTs were dispersed homogeneously in PBAT. The thermal stability of the nanocomposite decreased with increase in the content of epoxy-MWCNT-DEA due to the poor thermal stabilities of epoxy and amino silane DEA. However, the surface hydrophobicity of the nanocomposite increased. The highest stress (170% of PBAT) was observed when the content of epoxy-MWCNT-DEA in the nanocomposite was 2 wt%.