• Journal of Korea Water Resources Association
• /
• v.51 no.7
• /
• pp.585-597
• /
• 2018

This study aims to investigate the variation of water quality and discharge under the condition of climate change and Best Management Practices (BMPs), which is one of the reduction methods for non-point source pollution. Soil and Water Assessment Tool (SWAT) model is applied to case in Cheongmicheon watershed. The coefficients required for SWAT model were calibrated using SWAT Calibration and Uncertainty Program. Climate change is considered by using Representative Concentration Pathway (RCP) scenarios, RCP 4.5 and RCP 8.5. It is known from simulation results that the non-point source pollutant increases under the climate change scenario assuming worse condition. It is also found in this study that an appropriate application of BMPs is able to reduce the quantity and temporal variation of non-point source pollutant effectively.

• Journal of Korean Society on Water Environment
• /
• v.27 no.6
• /
• pp.905-913
• /
• 2011

This study was conducted to characterize the discharge feature of pollutant load from the upper and lower watershed influencing on the water quality of South Han River using the empirical equation and Factor Analysis. The results of regression analysis between flow rate and pollutant load were as follows. In the streams of the upper watershed of South Han river, $BOD_5$ and $COD_{Mn}$ were increased as the flow rate was increased. Also, steep increases in SS and TP were observed with positive correlation with the flow rate while change in TN was slightly shown. On the other hand, in the streams of the lower watershed of South Han river, $BOD_5$ was negatively correlated with the flow rate, being decreased with the increase in the flow rate. However, changes in $COD_{Mn}$, TN, SS, and TP showed a similar trend with those observed in the upper watershed. With Factor Analysis of the water quality and various components, it was appeared that the flow rate, SS, and TP were significantly correlated each other and they were indicated as the principal component influencing on water quality in the streams of the upper watershed. In contrast, $BOD_5$, $COD_{Mn}$ and TOC were significantly correlated each other and they were included as the principal pollution component of the streams in the lower watershed. From these results, it was conclusive that the upper watershed of South Han River was mainly affected by non point source pollutants while the lower watershed was influenced by point source pollutants from the developed areas.

• Journal of Environmental Impact Assessment
• /
• v.18 no.2
• /
• pp.59-67
• /
• 2009

Water quality of the Lake Youngrang in the Sokcho City is eutrophic. Jangcheon is the largest inflow source to the lake. Major pollutant sources are stormwater runoff from resort areas and various land uses in the Jangcheon watershed. A storm sewer on the southern end of the lake is also an important pollution source. In this study, water quality modelling for Lake Youngrang was carried out considering the rainfall-runoff pollution loads from the watershed. The rainfall-runoff curves and the rainfall-runoff pollutant load curves were derived from the rainfall-runoff survey data during the recent 4 years. The rainfall-runoff pollution loads and flow from the Jangcheon watershed and the storm sewer were estimated using the two kinds of curves, and they were used as the flow and the boundary data of the WASP model. With the measured water quality data of the year 2005 and 2006, WASP model was calibrated. Non-point pollution control measures such as wet pond and infiltration trench were considered as the alternative for water quality management of the lake. The predicted water quality were compared with those under the present condition, and the improvement effect of the lake water quality were analyzed.

• The Korean Journal of Ecology
• /
• v.20 no.1
• /
• pp.51-59
• /
• 1997

To investigate the distribution of heavy metal concentrations in Onsan bay, concentrations of cadmium, copper, zine and lead in surface sediments and the periwinkles (Littorina brevicula) were determined in Feburary and July, 1996. The ranges of cadmium, copper, zinc and lead concentrations in the surface sediments were 0.08-3.72, 3-307, 49-1273 and 15-399 ${\mu}g/g$ dry weight, respectively, The decrease of concentration in heavy metals with distance from Daejeong stream indicated that this stream is the pollutant source of heavy metals in Onsan Bay. The concentrations of cadmium, copper, zinc and led in L. brevicula were 0.11-11.81, 21-212, 30-96 and 0.26-4.12 ${\mu}g/g$ dry weigth in February and 1.01-24.9, 66-325, 54-225 and 0.68-8.41 ${\mu}g/g$ dry weight in July, respectively. These concentrations in L. brevicula were the significantly different (p<0.001) with the season of sampling. However, overall distribution of concentrations of heavy metals in L. brevicula had very similar tendency that concentrations of heavy metal decreased with the distance from the pollutant source irrespective of the two seasons. Therefore, L. brevicula is considered as a useful indicator for heavy metals pollution, According to analysis of the organs, tissues such as the digestive gland, gill and viceral mussel accumulate high concentrations of heavy metals.

• Journal of Korean Society on Water Environment
• /
• v.26 no.5
• /
• pp.789-795
• /
• 2010

Suspended Solid (SS) is one of the main pollutants and discharges with attached other pollutants such as heavy metal and toxic substance. It is very important to estimate and forecast the release characteristics of SS for water quality improvement. The current studies assumed that SS release rate is proportional to the rain intensity and suggested exponential washoff models. These models related to the shear force of flow. In this study, a new washoff model is suggested based on relation with SS release rate and mean flow rate of the basin surface which is closely related to the shear force. The proposed model is applied to the Goonja drainage district in Seoul, Korea. The new washoff model simulates the SS discharge more accurately in the various rainfall types. The model can be widely applied to the real problems such as the management of non-point source pollutant and the design of treatment facilities.

• Journal of Korean Society on Water Environment
• /
• v.21 no.4
• /
• pp.385-392
• /
• 2005

The control of nonpoint source pollution is essentially needed to successfully perform the Total Maximum Daily Load program. Of the various land uses in the nonpoint source, the paved areas such as a parking lot and a bridge are stormwater intensive land uses because of high imperviousness and high pollutant mass emissions. This research was performed to understand the magnitude and nature of the stormwater emissions with the purposes of quantifying stormwater pollutant concentrations and mass emission rates from a parking lot and a bridge. Two monitoring sites in Kongju city were equipped with an automatic rainfall gages and an automatic flow meter for accumulating the data such as rainfall, water quality and runoff flow rates. This paper will summarize the metal concentration changes during the storm duration and metal EMCs to characterize the concentration profiles in a parking lot and a bridge. Also a new concept, dynamic EMC, will be proposed to find the relationship between EMC and first flush effect. It can be used to determine the economical treatment criteria in best management practices.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.83-89
• /
• 2007

We studied runoff characteristics of combined sewer overflows in a city while it was raining. The event mean concentration (EMC) of biochemical oxygen demand (BOD), chemical oxygen demand ($COD_{Cr}$), suspended solids (SS), total nitrogen (TN), and total phosphorus (TP) in one of the combined sewer sites in Chuncheon was 63.5-211.6 mg/L, 114.9-523.8 mg/L, 70.3-436.4 mg/L, 6.4-33.0 mg/L, and 1.09-6.81 mg/L, respectively. In another combined sewer, the EMC of BOD, COD, SS, TN, and TP was 42.1-131.4 mg/L, 107.7-256.5 mg/L, 33.7-221.1 mg/L, 7.9-26.4 mg/L, and 1.16-3.91 mg/L, respectively. The ratio of the cumulative pollutant mass and the cumulative discharged volume determined using all parameters (BOD, $COD_{Cr}$, SS, TN, and TP) was over 1.0, which shows the first flush effect. Relationships between flow and loadings of BOD, $COD_{Cr}$, SS, TN, and TP were 0.90, 0.89, 0.88, 0.89, 0.92, respectively. Although the size of two areas was almost same, pollutant concentration and loading were different because of the amount of rainfall, rainfall intensity and basin area.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.187-199
• /
• 2016

In this study CALPUFF modeling was performed to predict a contribution of a separate single point pollutant source as well as of total point pollutant sources of major synthetic fiber manufacturers in Gumi national industrial complex to atmospheric trimethylamine concentration of the same area. In addition, a contribution of the separate single point pollution source to the atmospheric trimethylamine concentration of the same area was estimated relatively to the total point pollutant sources. As a result of the CALPUFF modeling, the maximum atmospheric concentration of trimethylamine in Gumi national industrial complex was appeared upon improving T company emission facility frequently in complex 3 in winter (January) and spring (April) while frequently in complex 1 in summer (July) and autumn (October). Besides, the predicted range of the maximum atmospheric concentration of trimethylamine in complex 1 was improved upon improving its emission facility. However, even though in complex 3 the upper bound of the predicted maximum atmospheric concentrations of trimethylamine was increased upon improving T company emission facility, the predicted value of their second upper bound below the upper bound was very similar to the upper bound of measured atmospheric trimethylamine concentrations in Gumi prior to improving its emission facility. Thus, the effect of improving T company emission facility was estimated huge in complex 1 while it was trivial in complex 3. These maximum concentrations of trimethylamine predicted to estimate the expected contribution of total point pollutant sources by CALPUFF modeling showed the similar values to those measured in the region of Gumi. Therefore, the expected contribution of total point pollutant sources to atmospheric trimethylamine concentration in the area of Gumi was validated.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.131-137
• /
• 2010

The stormwater runoff from rest areas in highways are known as more polluted compared to highways because of more vehicle activities. This study is performed to find pollutant characteristics in the rest areas in the magnitude of statistical pollutant concentrations during storms. Washoff characteristics of pollutants from rest areas by monitoring of rainfall, runoff rate and runoff samples were evaluated. High concentrations of pollutants in runoff were observed at the beginning of runoff and rapid decrease thereafter, indicating that first-flush effects are clearly occurred. Event Mean Concentrations(EMCs) of TSS, COD, TN, and TP are estimated to be in the range of 31.04-127.11mg/L, 35.5-369.5mg/L, 2.62-9.86 mg/L, and 0.53-1.96mg/L, respectively. Heavy metals in runoff showed relatively high values, possibly due to the abrasion of brake pad or tire while cars are slowly moving for parking. EMCs of total Pb, total Cu, and total Ni are in the range of $1206-16293{\mu}g/L$, $237-7906{\mu}g/L$, and $53-6372{\mu}g/L$, respectively. Pollutant loading per rest area calculated by using EMC, flowrate and target area is also described for each pollutant.

• Journal of Korean Society on Water Environment
• /
• v.27 no.1
• /
• pp.19-29
• /
• 2011

In order to assess the influences of bottom sediment on water quality, following measurement were made. (1) Estimations of pollutant loads from the bottom sediment based on mass balance concept, (2) measurements of pollutant concentrations in the sediment to assess the pollution level and influence potential, (3) in situ and laboratory measurements of Sediment Oxygen Demants (SOD) and pollutant load (sediment release) from bottom sediment. Analyses of inflow and outflow loadings using simple mass balance show that there are some variations found according to the pollutants. However, there is no consistent evidence that the sediment can be a source of pollutants. Pollutant concentrations in the sediment range 16~724.8 mg/kg (COD), 1.68 ~12.64 mg/kg (T-P), 5.6~76.8 mg/kg (T-N), 0.32~21.6 mg/kg ($NH_3$-N), 0.092~0.544 mg/kg ($NO_2$-N), 4.8~18.4 mg/kg ($NO_3$-N), and 1.59~11.23 mg/kg ($PO_4$-P). Measured SOD ranges $0.190{\sim}0.802g{\cdot}m^{-2}{\cdot}d^{-1}$ and measured release rate ranges $-1618.42{\sim}10mg/m^2{\cdot}d$(COD), $-12{\sim}16mg/m^2{\cdot}d$(T-P), $-197.37{\sim}140mg/m^2{\cdot}d$(T-N), $0.4{\sim}74.32mg/m^2{\cdot}d$($NH_3$-N), $-2.04{\sim}0.8mg/m^2{\cdot}d$ ($NO_2$-N), $-70{\sim}40mg/m^2{\cdot}d$ ($NO_3$-N), and $-26.11{\sim}28.55mg/m^2{\cdot}d$($PO_4$-P). All study results indicate that bottom sediments in the Seoha weir show only limited effects on the water quality. It implies that sediment dredging is not an effective option or management measure to reduce pollutant loading.