• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.411-417
• /
• 1994

The electro-optic polarization transmission characteristics of a liquid crystal (LC) cell is represented by a rotational transformation on the Poincare sphere, and its characteristic parameters, the angle and the axis of the rotation, are experimentally determined with respect to the voltage applied to the LC cell. From the experimental data obtained, we determine driving voltage for the LC cell to give the rotation angle near $180^{\circ}$ of the rotation for the change of the state of the LC cell from non-select to select state, which is a necessary condition for the realization of maximally bright images. The directions of the transmission axes of the polarizer and the analyzer which form a liquid crystal display panel together with the LC cell, are determined from the general characteristics of the rotaional transformation of the LC cell. cell.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.3
• /
• pp.245-250
• /
• 2004

This paper proposes a new method of measuring an air interface distance between a solid immersion lens(SIL) applied magneto-optic technology and the disk surface. For applying near-field recording (NFR) technology to the magneto-optic storage devices for the next generation, it is positively necessary to maintain the small air gap under about 100㎚. We design an apparatus that consists of some optical components such as a prism, a polarizer and an analyzer. By using the Fresnel reflection coefficient equation, Jones matrices calculation and Malus's law, we establish a mathematical model for understanding the characteristics of the system. The simulations are based on the mathematical model and through the simulation results which is made with various cases we can estimate the performance of the new optical gap sensor system. Experimental results, which are also based on the mathematical model for specific cases, are in good agreement with simulated ones and demonstrate the possibility as the new optical gap sensor.

• Laser Solutions
• /
• v.9 no.2
• /
• pp.17-22
• /
• 2006

In this study, PID control method was applied to decrease the power fluctuation of the pulse laser which is one of the major processing variables in laser machining process. To stabilize the power fluctuation of the pulse laser, we averaged 10 pulse outputs of Nd:YAG laser operating in 10Hz using boxcar averager, and with taking this averaged output as an input signal, we conducted PID control using optical attenuator which is consisted of half wave plate attached on the stepping motor and polarizer. When PID control was not enabled, the power fluctuation was 4.71% and with PID control, the power fluctuation was 1.86% for 2 hours and 1 hour respectively. As a result, we stabilized the power fluctuation of the pulse laser by 60.5%

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2006.06a
• /
• pp.89-96
• /
• 2006

In this study, PID control method was applied to decrease the power fluctuation of the pulse laser which is one of the major processing variables in laser machining process. To stabilize the power fluctuation of the pulse laser, we averaged 10 pulse outputs of Nd:YAG laser operating in 10Hz using boxcar averager, and with taking this averaged output as an input signal, we conducted PID control using optical attenuator which is consisted of half wave plate attached on the stepping motor and polarizer. When PID control was not enabled, the power fluctuation was 4.71% and with PID control, the power fluctuation was 1.86% for 2 hours and 1 hour respectively. As a result, we stabilized the power fluctuation of the pulse laser by 60.5%

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.182-186
• /
• 2006

Due to their periodic helical structure, cholesteric liquid crystals (CLC) have a unique ability to selectively reflect light. CLC films reflecting a broad wavelength band were prepared by inducing a pitch gradient in CLC layer through a phase separation. The reflection bandwidth of the CLC cell was broaden as irradiation light intensity decreased and as the amount of the UV absorbing dye increased. Initial reflection bandwidth of 50 nm was broaden to 300 nm Various pitch distributions in the CLC cell was observed using SEM and ATR-IR technique was used to prove that the pitch distributions are induced through the phase separation.

• Korean Journal of Optics and Photonics
• /
• v.22 no.4
• /
• pp.170-178
• /
• 2011

The spectroscopic ellipsometric constants are analyzed to determine the thickness and the complex refractive index of a film coated on a semi-transparent substrate, with the reflection from the backside of the substrate properly considered. Expressions representing the effect of the backside reflection on ellipsometric constants are derived using the thickness and the complex refractive index of the substrate. The thickness and the complex refractive of an ITO thin film coated on a glass substrate are obtained by using this method. The results agree quite well with the ones obtained by following the conventional modeling procedure where the backside reflection is neglected during ellipsometric measurement and analysis.

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.598-604
• /
• 2014

A polarization fluorescence correlation spectroscopy system based on a confocal microscope was built to study the rotational and translational diffusion of CdSe/CdS quantum rods (Q-rods), with the same and different polarization states between the polarizer and the analyzer (i.e. the XXX and XYY states). The rotational diffusion amplitude showed the dependences on polarization of $0.75{\pm}0.05$ in the XXX state and $0.26{\pm}0.03$ in the XYY state, when the translational diffusion amplitude was 1. The diffusion coefficients of the Q-rods were found based on their translational and rotational diffusion times in the two polarization states, in solutions with viscosity ranging from 0.9 to 6.9 cP. The translational and rotational diffusion coefficients ranged from $1.5{\times}10^{-11}$ to $2.6{\times}10^{-12}m^2s^{-1}$ and from $2.9{\times}10^5$ to $5.6{\times}10^4s^{-1}$, respectively.

• Membrane Journal
• /
• v.26 no.3
• /
• pp.173-178
• /
• 2016

In this short review, the polymer electrolyte membranes consisting of polymer and Ag salts were introduced and various approaches to solve the long-term stability were summarized. In particular, utilizing $AgNO_3$ as carriers with ionic liquid, the replacement of polymer matrix as poly(ethylene phthalate) (PEP) for strong coordinative interactions with Ag ions and the introduction of $Al(NO_3)_3$ to $polymer/AgBF_4$ complexes were introduced for long-term stable facilitated olefin transport membranes. For the polymer nanocomposite membranes, the role of electron acceptors as polarizer on the surface of AgNPs and the approach to solve the low permeance were introduced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.681-684
• /
• 2015

Magnetization is very important in the ferro-magnetic physics and provides useful informations in the application field of magnetic devices. Generally, the only first acquired domain pattern is not helpful to recognize domain pattern. Many images are needed to visualize domain pattern through image processing. These images were obtained a 8-bit digital camera. The operation was the subtraction of pixel values of multi domain imanges from the images with 255 of pixel value, which was obtained in the saturated state of magnetic materials. The magnetic domain images was visualized gradually with increasing the number of subtracion operation. LABVIEW was used as an image processing tool and the optic microscope with a polarizer was used in this experiment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.201-206
• /
• 2004

We have performed computer simulation and experiment to obtain electro-optic characteristics of reflective hybrid aligned nematic (R-HAN) cell driven by fringe field, in which the cell consists of polarizer, optical compensation film, LC layer and reflector. Conventional R-HAN cell driven by fringe field using only the LC layer shows high wavelength dispersion at dark-state and thus viewing angle characteristic is strongly wavelength-dependent. In order to improve this demerit, we added one optical compensation film to conventional R-HAN cell. The display with optimized cell parameters shows low wavelength dispersion at dark-state and exhibits a wide viewing angle without the occurrence of grey scale inversion over a wide range of viewing angles and the contrast ratio greater than 5 over exists about 120$^{\circ}$ in vortical direction and 160$^{\circ}$in horizontal direction. Experimental results show good agreements with theoretical results and fast response time.