• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.117-119
• /
• 2007

We need two operation modes to obtain the complex hologram without bias and the conjugate image in the modified triangular interferometer(MTI). To solve the problem, we proposed the optimized MTI with one wave plate, which can obtain cosine and sine functions by the combination of one wave plate and one linear polarizer. In the extraction of phase term using the combination of polarization components, the phase error occurs, and we analyzed such potential phase errors in the optimized MTI.

• Journal of Welding and Joining
• /
• 제16권6호
• /
• pp.59-68
• /
• 1998

In this study, effects of solidification modes (primary $\delta$-ferrite, primary ${\gamma}$-austenite) on the pit initiation and propagation in the 304L and 316L austenitic stainless steel weld metals were investigated. The solidification mode of weld metal was controlled by the addition of nitrogen to Ar shielding gas. Through the electrochemical experiments (potentiodynamic anodic polarization and potentiostatic time-current transient test) and metallographic examination (microstructure and elemental distribution), the following results were obtained. The more the volume content of nitrogen in the shielding gas were, the lower critical current density for passivity was observed. In comparison with weldments solidified through the primary $\delta$-ferrite solidification mode and the primary ${\gamma}$-solidification mode, the former showed higher critical pitting potential and a longer incubation time for stable pit initiation than the latter. However, in the pit propagation stage the former exhibited a faster dissolution rate than the latter. These results were believed to ee related to the distribution of alloying elements such as Cr, Mo, Ni and S.

• 한국광학회지
• /
• 제16권3호
• /
• pp.261-265
• /
• 2005

광자결정의 밴드갭이 크면서도 모든 편광방향에 대해 동일하게 설계될 수 있다면, 이러한 광밴드갭은 다양한 소자의 응용에 있어 보다 유용해 질 수 있다. 현재까지는 원형의 공기구멍으로 이루어진 삼각격자 구조가 가장 큰 광밴드갭을 갖는 것으로 알려져 왔으나, 본 논문에서는 각종 구조적 변화에 의한 밴드갭의 변화경향을 분석하고 체계화함에 따라, 모든 편광방향에 대해 광밴드갭이 동일하면서 가장 크게 되는 새로운 격자구조를 제안하였다. 이 구조의 광밴드갭 비율$(\Delta\omega/\omega)$은 기존의 삼각격자에 비해 약 $30\%$ 정도 증대된 것임을 확인하였다.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.716-721
• /
• 2016

A single-and dual-wavelength switchable polarized Yb-doped double-clad fiber laser around 1120 nm based on a pair of fiber Bragg gratings (FBGs) is demonstrated. The polarization-maintaining (PM) linear cavity is composed of a double clad PM Yb-doped fiber (YDF) and a pair of PM FBGs. The laser can operate in stable dual-wavelength or wavelength-switching modes due to the polarization hole burning (PHB) and the spatial hole burning (SHB) enhanced by the PM linear cavity. In dual-wavelength operation, the two orthogonally polarized wavelengths are centered at 1118.912 nm and 1119.152 nm, with an interval of 0.24 nm and a signal to noise ratio (SNR) of 35 dB. The maximum output power is 14.67 W when the launched LD pump is 24 W corresponding to an optical efficiency of 61.1%. The lasing lines switchover may be realized by adjusting the polarization controller (PC) fitted in the cavity. The two single-wavelengths are 1118.912 nm and 1119.152 nm. When the injected LD pump is 24 W, the highest output powers are 7.68 W and 8.64 W corresponding to optical efficiencies of 32% and 36% respectively. The spectral linewidth of the lasing lines are 0.075 nm and 0.07 nm, and the average numerical values of PER aredB and 19.9 dB, respectively.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.566-574
• /
• 2015

We report for the first time highly efficient trans-reflective color filters capable of demonstrating coloration in both transmission and reflection modes by taking advantage of a multilayer stack consisting of MgF₂ and TiO₂ used respectively as the low and high index materials. In order to enable such trans-reflective performance, securing an optimal stop band assuming an appropriate bandwidth within the visible regime is pivotal, which was realized by tailoring the thicknesses and the numbers of TiO₂-MgF₂ bi-layers. Three devices were designed through rigorous simulations and developed via e-beam evaporation to demonstrate vivid blue, green, and red colors in the reflection mode, and yellow, magenta, and cyan colors in the transmission mode, featuring an enhanced efficiency exceeding 90% under normal incidence. The color performance of the filters was examined by referring to the chromaticity coordinates of the transmission and reflection spectra, alongside photographed color images. The dependence of the performance on the angle of incidence was explored with respect to incident polarization, indicating that a transmission surpassing 60% could be stably maintained up to an angle of 75°. Polarization independent transfer characteristics were especially achieved for the normal incidence. The proposed devices may be readily extended to other spectral regimes by adjusting the thicknesses of the films.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.60-60
• /
• 2011

Giant magnetoresistance (GMR), tunneling magnetoresistance (TMR), and magnetic random-access memory (MRAM) are currently active research areas in spintronics. The high magnetoresistance and the high spin polarization (P) of electrons in the ferromagnetic electrodes of tunnel junction or intermediate layers are required. Magnetite, Fe3O4, is predicted to possess as half-metallic nature, P ~ 100% spin polarization, and has a high Curie temperature (TC~850 K). Experiments demonstrated that the P~($80{\pm}5$)%, ~($60{\pm}5$)%, and ~40-55% for epitaxial (111), (110) and (001)-oriented Fe3O4 thin films, respectively. Epitaxial Fe3O4 films may enable us to investigate the effects of half metals on the spin transport without grain-boundary scattering.In addition, it has been reported that the Verwey transition (TV, a first order metal-insulator transition) of 120 K in bulk Fe3O4 is strongly affected by many parameters such as stoichiometry and stress, etc. Here we report that the growth modes, magnetism and transport properties of Fe3O4 thin films were strongly dependent on the oxygen pressure during film growth. The average roughness decreases from 1.021 to 0.263 nm for the oxygen pressure increase from $2.3{\times}10-7$ to $8.2{\times}10^{-6}$ Torr, respectively. The 120 K Verwey transition in Fe3O4 was disappeared for the sample grown under high oxygen pressure.

• 한국전자파학회논문지
• /
• 제23권5호
• /
• pp.652-659
• /
• 2012

직사각형 슬릿 개구를 갖는 금속 함체에 수직, 수평 편파를 입사하여 차폐 효과를 연구하였다. 직사각형 슬릿개구의 magnetic polarizability와 금속 함체의 공진 모드를 이론적으로 분석하였고, 이를 바탕으로 시뮬레이션 결과와 측정 결과를 비교 분석하였다. 또한, 함체 내부 프로브의 위치에 따른 차폐 효과 의존성도 분석하였다.

• 한국산학기술학회논문지
• /
• 제13권7호
• /
• pp.3201-3206
• /
• 2012

본 논문은 정방형 도파관을 이용하여 편파면을 회전시키는 편파기의 단순화된 설계법을 제안하였다. Ku 밴드 주파수인 14.3GHz~14.8GHz에서 동작하는 $180^{\circ}$ 편파기의 특성을 최적화하기 위하여, 개선된 모드정합법과 구분적 멱보간법을 편파기 설계에 적용하였다. 최적화 결과는 VSWR<2 인 범위의 Ku 밴드 주파수 대역에서 500MHz의 대역폭을 나타내었고, 직교모드 $TE_{10}$와 $TE_{01}$ 간에 위상차는 14.2GHz~14.8GHz 주파수 대역에서 $180^{\circ}{\pm}1^{\circ}$ 를 갖는다. 그리고 교차편파 손실은 40dB 이하이고, 통과대역의 삽입손실은 0.1dB 이다. 따라서 제안한 편파기는 낮은 VSWR과 소형의 크기가 요구되는 실질적인 Ku 밴드 시스템에 적용이 가능하다.

• Journal of Ginseng Research
• /
• 제44권5호
• /
• pp.690-696
• /
• 2020

Background: As the main metabolites of ginsenosides, 20(S, R)-protopanaxadiol [PPD(S, R)] and 20(S, R)-protopanaxatriol [PPT(S, R)] are the structural basis response to a series of pharmacological effects of their parent components. Although the estrogenicity of several ginsenosides has been confirmed, however, the underlying mechanisms of their estrogenic effects are still largely unclear. In this work, PPD(S, R) and PPT(S, R) were assessed for their ability to bind and activate human estrogen receptor α (hERα) by a combination of in vitro and in silico analysis. Methods: The recombinant hERα ligand-binding domain (hERα-LBD) was expressed in E. coli strain. The direct binding interactions of ginsenosides with hERα-LBD and their ERα agonistic potency were investigated by fluorescence polarization and reporter gene assays, respectively. Then, molecular dynamics simulations were carried out to simulate the binding modes between ginsenosides and hERα-LBD to reveal the structural basis for their agonist activities toward receptor. Results: Fluorescence polarization assay revealed that PPD(S, R) and PPT(S, R) could bind to hERα-LBD with moderate affinities. In the dual luciferase reporter assay using transiently transfected MCF-7 cells, PPD(S, R) and PPT(S, R) acted as agonists of hERα. Molecular docking results showed that these ginsenosides adopted an agonist conformation in the flexible hydrophobic ligand-binding pocket. The stereostructure of C-20 hydroxyl group and the presence of C-6 hydroxyl group exerted significant influence on the hydrogen bond network and steric hindrance, respectively. Conclusion: This work may provide insight into the chemical and pharmacological screening of novel therapeutic agents from ginsenosides.

• 멤브레인
• /
• 제25권4호
• /
• pp.367-372
• /
• 2015

정삼투와 압력지연삼투 공정에서 용매의 투과율은 용매와 막이 접촉하는 방식에 의존한다. 각각의 공정에서 막의 활성층이 고농도 용매와 접촉하는 경우를 압력지연삼투 방식이라 하고, 고농도 용매가 막의 다공성 지지하층과 직면해 있는 경우를 정삼투 방식이라고 한다. 압력지연삼투 방식과 정삼투 방식은 각각 희석형 그리고 농축형의 내부농도 분극 현상을 유발하는데, 동일한 조작 조건에서 정삼투 방식보다 압력지연삼투 방식이 높은 투과율을 나타내는 현상이 실험적으로 관측되었다. 본고에서는 정삼투방식과 압력지연삼투 방식에서 발생하는 본질적인 투과율 불균형을 수학적 귀류법을 이용하여 증명하고, 물리적인 원인을 규명한다.