• 대한전자공학회논문지SP
• /
• 제44권3호
• /
• pp.48-60
• /
• 2007

기존의 연구에서는 홍채 특징 추출을 위해 검출된 원형 홍채 영역을 직교 사각형 홍채 영상으로 스트레칭 및 보간 하는 작업을 수행하였다. 이러한 경우 실제 홍채 특징이 왜곡되는 현상이 발생한다. 본 논문에서는 홍채 영상의 왜곡 없이 정확하게 홍채 특징을 추출할 수 있는 방법을 제안한다. 본 연구는 다음과 같은 세 가지 장점을 가지고 있다. 첫 번째, 극좌표 원형 영상 방식을 이용하여 기존의 직교 사각형 영상 방식보다 인식 성능 면에서 우수하다는 점을 해밍거리, 코사인거리, 유클리디안 거리의 3가지 metric을 이용하여 실제로 비교해본 점이며, 두 번째, 최근 홍채인식 연구의 주된 흐름인 품질이 좋지 못한 Non-Ideal 홍채 영상 중 하나의 형태인 홍채 카메라의 중심을 쳐다보지 않은 상태에서 취득된 홍채 영상의 동공과 홍채 중심 위치가 많이 차이나는 경우에 동공과 홍채 경계를 각각 원형 경계 검출로 경계를 찾은 후, 영상에 대한 보간(interpolation)없이 극좌표 원형 홍채 영상에서 직접 특징을 추출함으로써 홍채인식의 성능을 향상한 점이다. 마지막 세 번째는 극좌표 원형방식을 사용할 경우 발생하는 중복 포인트 문제를 해결한 것이다. 이러한 중복 포인트들은 같은 위치에서 여러 홍채 특징을 추출하는 현상을 야기함으로서 저주파 홍채 특징을 생성하는 결과를 낳게 된다. 즉, 홍채 특징의 신호 변화가 실제로 존재함에도 불구하고 같은 위치에서의 여러 홍채 특징들을 추출함으로써 파형변화가 적은 비슷한 홍채 신호를 만들게 된다. 중복 포인트가 주기적으로 많이 발생하는 동공부근의 첫 번째 트랙에 가버필더 적용 시 필터의 주파수를 작게 하여 중복 포인트에 의해 발생된 저주파 홍채 신호를 정확하게 추출하게 함으로써 홍채 인식 성능을 향상 시킨 점이다. 실험 결과, 기존의 직교 사각형 영상 기반 방식이 EER 0.29% 와 d'값 5.8 이였으며, 제안하는 극좌표 원형 방식이 EER 0.16% 와 d'값 6.4로 인식 성공률이 보다 높음을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.501-509
• /
• 2003

We have designed transflective liquid crystal display(LCD) associated with in-plane switching of a LC director driven by fringe-field, unlike other LCD mode. Reflective area consists of a λ/2 compensation film and a LC cell with retardation value(dΔn) of λ/4 with their optic axes making an angle of 15$^{\circ}$ and 75$^{\circ}$ against polarizer, respectively. In the transmissive area, top and bottom polarizers are parallel each other, an LC has a dΔn of λ/2, and another λ/2 compensation film is inserted between the LC cell and bottom polarizer. With the configuration, both devices show dark state initially. When an incident light is 550nm, the device shows wide-viewing-angle characteristics such that in the reflective area the contrast ratio target than 5 exists up to 55$^{\circ}$ of polar angle in all directions and in transmissive area it exists about 100$^{\circ}$ in vortical direction and 110$^{\circ}$ in horizontal direction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.135-139
• /
• 1988

This paper presents a new algorithm using power flow solution which is given by the polar form Newton-Raphson method in a transient stability analysis. The computation time to solve network equations can be much saved by a decoupled power flow method. In addition, the time is much saved in performing a approximate stability analysis by linearizing the differential equations and using a voltage and angle sensitivity matrix given in network equations.

• Journal of Magnetics
• /
• 제3권2호
• /
• pp.49-54
• /
• 1998

Dependence of magnetic and magneto-optic properties on composition of amorphous NdFe alloys has been studied to identify a promising magneto-optic recording material in the wavelength of a blue laser beam. From the view point of crystallographic state, perpendicular magnetic anisotropy energy and polar Kerr rotation angle, the Nd-rich region was found to be suitable for the research purpose.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.310-315
• /
• 2010

Theoretical and experimental investigations of moires in 3D displays were performed. To describe and minimize moires, we propose the polar representation form of moire waves. The experimental and theoretical data are in good agreement except in the neighborhood of the minimization angle. The implicit formulas are found for visible moires of line gratings at finite distances. The computer simulation and the physical experiments confirm the moire appearance for this case.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.317-320
• /
• 2005

We report experimental and simulation results of L0 state using inner retarder film compared with normal retardation film. In short wavelength range, the reflectance of inner retardation film is three times compared with that of normal retardation film. This results in blue color of L0 state, as retardation decreases or polar angle increases, the color shifts toward purple, finally yellow color, as expected in the simulation results.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권6호
• /
• pp.800-807
• /
• 2016

We propose a fast algorithm using Extreme Contour Point (ECP) to detect the angle of rotated images, is implemented by rotation feature of one covered frame image that can be applied to correct the rotated images like in image processing for real time applications, while CORDIC is inefficient to calculate various points like high definition image since it is only possible to detect rotated angle between one point and the other point. The two advantages of this algorithm, namely compatibility to images in preprocessing by using Sobel edge process for pattern recognition. While the other one is its simplicity for rotated angle detection with cyclic shift of two $1{\times}n$ matrix set without complexity in calculation compared with CORDIC algorithm. In ECP, the edge features of the sample image of gray scale were determined using the Sobel Edge Process. Then, it was subjected to binary code conversion of 0 or 1 with circular boundary to constitute the rotation in invariant conditions. The results were extracted to extreme points of the binary image. Its components expressed not just only the features of angle ${\theta}$ but also the square of radius $r^2$ from the origin of the image. The detected angle of this algorithm is limited only to an angle below 10 degrees but it is appropriate for real time application because it can process a 200 degree with an assumption 20 frames per second. ECP algorithm has an O ($n^2$) in Big O notation that improves the execution time about 7 times the performance if CORDIC algorithm is used.

• 한국의류학회지
• /
• 제35권10호
• /
• pp.1242-1251
• /
• 2011

This study investigates the effect of mixed characteristics of oily soil such as mixed ratio, polarity of oily soil on contact angle of fabric, removal of oily and particulate soil from PET fabric in oily/particulate soil mixed system. The contact angle of fabric in the surfactant solution with suspended oily soil was examined as a fundamental environment of detergency of soil from fabrics. Detergency was investigated as function of mixed ratios of oily/ particulate soil, type of oily soil, surfactants concentration, surfactant type and temperature of detergency in surfactant solution. The contact angle of fabric in surfactant solution sharply increased with mixing nonpolar oily soil; in addition, the contact angle slightly increased with increasing contents of oily soil and decreased with increasing surfactant concentration. The removal of oily and particulate soil from fabric was higher in the solution mixed with polar versus nonpolar oily soil. The detergency increased with increasing surfactant concentration and the increased temperature of surfactants solution that were relatively improved in NPE compared to DBS solutions, The results indicated that the detergency of oily and particulate soil showed a similar trend in oily/ particulate mixed soil systems. The general contact angle of fabric was well related with the detergency of oily and particulate soil in oily/particulate mixed soil system, therefore, the primary factor determining the detergency of soil in oily/particulate mixed soil system may be the contact angle of fabric caused by wettability.

• Structural Engineering and Mechanics
• /
• 제52권2호
• /
• pp.323-349
• /
• 2014

In this paper, linear buckling analysis of a curved sandwich beam with a flexible core is investigated. Derivation of equations for face sheets is accomplished via the classical theory of curved beam, whereas for the flexible core, the elasticity equations in polar coordinates are implemented. Employing the von-Karman type geometrical non-linearity in strain-displacement relations, nonlinear governing equations are resulted. Linear pre-buckling analysis is performed neglecting the rotation effects in pre-buckling state. Stability equations are concluded based on the adjacent equilibrium criterion. Considering the movable simply supported type of boundary conditions, suitable trigonometric solutions are adopted which satisfy the assumed edge conditions. The critical uniform load of the beam is obtained as a closed-form expression. Numerical results cover the effects of various parameters on the critical buckling load of the curved beam. It is shown that, face thickness, core thickness, core module, fiber angle of faces, stacking sequence of faces and openin angle of the beam all affect greatly on the buckling pressure of the beam and its buckled shape.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.338-341
• /
• 2005

We have examined the aspects of the orientational ordering deformation of ferroelectric liquid crystal during bending performance of plastic substrate by analyzing the polarizing optical microscope texture and the birefringence of the cell. Striped texture becomes more prominent as the radius of curvature of substrate gets smaller. The optic axis of the adjacent stripes domain was not same and the relative angle between them becomes larger as the radius of curvature gets smaller. Especially, the optic axis rotation angle of one domain was lager than the other and the liquid crystal molecules in each domain became more coherent. In addition, the birefringence data with obliquely incident light shows the polar direction shift of liquid crystal molecule by bending performance.