• 한국농공학회논문집
• /
• 제62권4호
• /
• pp.45-51
• /
• 2020

The poisson's ratio was obtained from the effective vertical stress and horizontal stress of consolidation-undrained test. It was analyzed void ratio verse poisson's ratio. At the result, the effective friction angle was increase with relative density increased, was decreased the poisson's ratio. The empirical equation of void ratio and poisson's ratio was showed very high correlation r²=0.846. The empirical equation was showed that the smaller the void ratio in the fine grained soil than granular soil. In the case of 0.85 times the correlation analysis equation of granular and fine grained soil, the experimental results were shown very similarly. In especially, the poisson's ratio prediction results was shown within 5% of the error range, was revalidation 0.85 times the correlation analysis equation using the void ratio. In this study, correlation analysis equation of the granular and fine grained soil was more reliability of the poisson's ratio prediction results apply to the void ratio than dry unit weight.

• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.586-590
• /
• 2009

Poisson's ratio, one of elastic constants of elastic solids, has not attracted attention due to its narrow range and difficult measurement. Transverse wave velocity as well as longitudinal wave velocity should be measured for nondestructive measurement of Poisson's ratio. Rigid couplants for transverse wave is one of obstacle for scanning over specimen. In the present work, a novel measurement of Poisson's ratio distribution was applied. Immersion method was employed for the scanning over the specimen. Echo signals of normal beam longitudinal wave were collected, and transverse wave modes generated by mode conversion were identified. From transit time of longitudinal and transverse waves, Poisson's ratio was determined without the information of specimen thickness. Poisson's ratio distribution of the carbon steel weldment was mapped. Heat affected zone of the weldment was clearly distinguished from base and filler metals.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.694-697
• /
• 2003

Materials with specific micro-structural shape can exhibit negative Poisson's ratio. These materials can be widely used in structural applications because of their high resilience and resistance to impact. Specially, in the field of artificial implant's material, they have many potential applications. In this study, we investigated the Poisson's ratio and the ratio(E$_{e}$/E) of the elastic modulus of rotational particle structures based on structural design variables using finite element method. As the ratio of fibril's length to particle's diameter increased and the ratio of fibril's diameter to fibril's length decreased fixing the fibril's angle with 45 degree. the negative Poisson effect of rotational particle structures increased. The ratio of elastic modulus of these structures decreased with Poisson's ratio. The results show the reasonable values as compared with the previous analytical results.s.

• Journal of the Korean Data and Information Science Society
• /
• 제17권2호
• /
• pp.619-631
• /
• 2006

When X and Y have independent Poisson distributions, we develop a Bayesian one-sided testing procedures for the ratio of two Poisson means. We propose the objective Bayesian one-sided testing procedures for the ratio of two Poisson means based on the fractional Bayes factor and the intrinsic Bayes factor. Some real examples are provided.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2006년도 PROCEEDINGS OF JOINT CONFERENCEOF KDISS AND KDAS
• /
• pp.295-306
• /
• 2006

When X and Y have independent Poisson distributions, we develop a Bayesian one-sided testing procedures for the ratio of two Poisson means. We propose the objective Bayesian one-sided testing procedures for the ratio of two Poisson means based on the fractional Bayes factor and the intrinsic Bayes factor. Some real examples are provided.

• Computers and Concrete
• /
• 제32권3호
• /
• pp.303-311
• /
• 2023

An analysis of the Poisson's ratios influence of single walled carbon nanotubes (SWCNTs) based on Sander's shell theory is carried out. The effect of Poisson's ratio, boundary conditions and different armchairs SWCNTs is discussed and studied. The Galerkin's method is applied to get the eigen values in matrix form. The obtained results shows that, the decrease in ratios of Poisson, the frequency increases. Poisson's ratio directly measures the deformation in the material. A high Poisson's ratio denotes that the material exhibits large elastic deformation. Due to these deformation frequencies of carbon nanotubes increases. The frequency value increases with the increase of indices of single walled carbon nanotubes. The prescribe boundary conditions used are simply supported and clamped simply supported. The Timoshenko beam model is used to compare the results. The present method should serve as bench mark results for agreeing the results of other models, with slightly different value of the natural frequencies.

• 비파괴검사학회지
• /
• 제28권6호
• /
• pp.519-523
• /
• 2008

Poisson's ratio is one of elastic constants of elastic solids. However, it has not attracted attention due to its narrow range and difficult measurement. Transverse wave velocity as well as longitudinal wave velocity should be measured for nondestructive measurement of Poisson's ratio. Hard couplant for transverse wave prevents transducer from scanning over specimen. In the present work, a novel measurement of Poisson's ratio distribution was proposed. Immersion method was employed for the scanning over the specimen. Echo signals of normal beam longitudinal wave were collected. Transverse wave modes generated by mode conversion were identified. From transit time of longitudinal and transverse waves, Poisson's ratio can be determined without information of specimen thickness. This technique was demonstrated for aluminum and steel specimens.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.317-323
• /
• 2017

Due to the unique characteristic of auxetic material, negative poisson's ratio, it has a variety of distinctive properties compared to conventional materials. Numerous researches have been conducted on the auxetic material in order to find out how to make auxetics. In this study, we analyzed triangular and rectangular patterned rotating rigid units using finite element method. Our purpose is to investigate the mechanical properties of the rotating rigid units and to show their auxetic behaviors. We studied the Poisson's ratio and the bulk modulus of the rotating rigid units depending on their unit cell sizes. The Poisson's ratio and the bulk modulus decreased as the number of unit cells increased. Also, when the geometry of the unit cell was changed, the tendency of the Poisson's ratio and the bulk modulus was also different from the previous case. The results of the Poisson's ratio and the bulk modulus referred that they were critically affected by the number of unit cells and the shape of unit cell.

• Journal of Biosystems Engineering
• /
• 제20권2호
• /
• pp.133-140
• /
• 1995

The model of Poisson's ratio of the fruits was developed on the basis that the cylindrical fruits specimen became the barrel shape when it was being compressed. The model of the corrected creep compliance of the fruits was developed under considering the developed model of Poisson's ratio. Both of the Poisson's ratio and the corrected creep compliance of the samples showed the nonlinear viscoelastic behavior. Those models were a similar form, but their coefficients of the model were different, and these behaviors of the samples were well described by the nonlinear model as a function of the initial stress and time. Effects of storage condition and period on the Poisson's ratio of the samples were investigated, and comparisons between the corrected and the uncorrected creep compliance of the samples were made.

• 지질공학
• /
• 제6권2호
• /
• pp.103-110
• /
• 1996

본 연구는 의성 소분지에 분포하는 백악기 사암과 셰일을 대상으로 압력에 따른 포아송비의 변화를 구명(究明)한 것이다. 역학적 시험을 실시하기 위하여, 직경 30.0Cm, 길이 6.2Cm인 시료를 사용하여 응력/변형률 시험을 하였다. 시험에 사용된 기기는 분해 능이 $10^{-7}$인 증폭기 및 16비트 A/D변환기,컴퓨터,하중 계측기,시험 운영 프로그램으로 구성되어 있으며, 유효자료 획득 속도는 매 초당 6~100개이다. 일반적으로 포아송비는 지금까지 하나의 물성으로 취급되어 왔으나, 본 시험 결과 금속류와는 달리 포아송비는 압력에 따라 변하는, 압력과 함수 관계에 있음이 확인되었다. 포아송비를 도출함에 있어서 4가지 방법을 사용한 결과, 계산에서는 포아송비가 급격하게 증가하여, 계산방법에 따라 파괴 영역이 확연히 구분되어 진다. 사암과 셰일은 낮은 하중과 높은 하중에서는 서로 다른 거동을 보였으나, 중간 하중 영역즉 탄성 한계 내에서는 ${\nu}_t={\nu}_0+P_{\sigma}$로(${\nu}_0$ : 탄성 영역 내에서의 초기 포아송비. ${\nu}_t$ : 탄성 영역 내에서의 포아송비, P : 포아송 계수, $\sigma$:응력)일차함수적으로 증가하였다. 2가지 암석 시료 모두 탄성 한계 내에서 포아송비는 0.1~0.21의 연속적인 변화 양상을 나타내며,파괴강도 65% 이사에서 급격히 증가하여 0.22~0.45로 나타나므로 이는 탄성 범위밖에 해당된다.