• 한국의류학회지
• /
• 제37권6호
• /
• pp.750-763
• /
• 2013

This research suggests pattern design methods for motion through an evaluation of the appearance and motion of three existing kinds of original patterns (K type, N type, and L type) and modified patterns designed by the researcher. The results of the study are as follows. First, the evaluation of appearances showed that the modified patterns of a standing posture received a higher evaluation compared to the original patterns only in N type and in a sitting posture. In addition, the degree of lowering or a natural feel by the pulling of the slacks waist belt in a sitting posture received a higher evaluation than the original patterns. Second, the evaluation of motions showed that modified patterns received a higher evaluation than the original patterns in almost all items. Per each pattern, it showed meaningful differences in questions asking about the degree of comfort as the whole in N type in crouching motions. The L type showed low scores as a whole (both in original patterns and modified patterns) and the K type showed meaningful differences in questions asking about the degree of comfort of the crista iliaca and groin region in the motion of walking at a normal walking pace, ascending stairs and bending the waist 90 degree to the front. Third, the measuring distance the between back waist point of the body and the back waist point of original patterns and modified patterns during motions showed that the modified patterns of all three patterns (N type, L type, and K type) showed less lowering compared to the original forms in the whole pattern as well as individual patterns. The design method of back waist point developed in this research can be regarded as a design method appropriate for motions.

• 대한원격탐사학회지
• /
• 제27권6호
• /
• pp.625-635
• /
• 2011

This paper investigates the effects of spatial autocorrelation structures in low resolution data on downscaling without ground measurements or secondary data, as well as the potential of geostatistical downscaling. An advanced geostatistical downscaling scheme applied in this paper consists of two analytical steps: the estimation of the point-support spatial autocorrelation structure by variogram deconvolution and the application of area-to-point kriging. Point kriging of block data without variogram deconvolution is also applied for a comparison purpose. Experiments using two low resolution thematic maps derived from remote sensing data showing very different spatial patterns are carried out to discuss the objectives. From the experiments, it is demonstrated that the advanced geostatistical downscaling scheme can generate the downscaling results that well preserve overall patterns of original low resolution data and also satisfy the coherence property, regardless of spatial patterns in input low resolution data. Point kriging of block data can produce the downscaling result compatible to that by area-to-point kriging when the spatial continuity in block data is strong. If heterogeneous local variations are dominant in input block data, the treatment of the low resolution data as point data cannot generate the reliable downscaling result, and this simplification should not be applied to donwscaling.

• 공학논문집
• /
• 제8권1호
• /
• pp.107-118
• /
• 2006

연안수질 개선 및 환경회복도 추정을 위한 3차원 수질 모델의 구성에서 나타나는 어려운 점들로는 실측자료가 부족하다는 점과 지속적 관측이 어렵다는 점들을 들 수 있다. 따라서, 연안역에 대한 수질모의 및 관리기법 개발 연구의 중간 단계로서 진해-마산만 유역에 대한 강우 및 비점오염물 유출 양상을 실측하였고, 유량 및 오염물 유출양상에 대한 해석을 위하여 위성영상시스템 및 지리정보체계 기법을 적용하였다. 지리정보체계(IDRISI 사용)를 통한 진해-마산만 유역의 용지 사용분포, 지점오염 부하량과 유역정보 결과를 사용하여 수질모의 모형(SWMM 사용)을 적용하였고, 관측되어진 비점오염물들의 유출양상을 통하여 오염물들의 유출특성을 고려한 관측기법의 개선방안과 GIS기법의 적용 방안을 제시하였다.

• Journal of Information Display
• /
• 제10권1호
• /
• pp.6-15
• /
• 2009

In this paper, a new approach is proposed for the efficient generation of computer-generated holograms (CGHs) using the spatially redundant data on a 3D object and the novel look-up table (N-LUT) method. First, the pre-calculated N-point principle fringe patterns (PFPs) were calculated using the 1-point PFP of the N-LUT. Second, spatially redundant data on a 3D object were extracted and re-grouped into the N-point redundancy map using the run-length encoding (RLE) method. Then CGH patterns were generated using the spatial redundancy map and the N-LUT method. Finally, the generated hologram patterns were reconstructed. In this approach, the object points that were involved in the calculation of the CGH patterns were dramatically reduced, due to which the computational speed was increased. Some experiments with a test 3D object were carried out and the results were compared with those of conventional methods.

• 패션비즈니스
• /
• 제22권4호
• /
• pp.30-46
• /
• 2018

The purpose of the study was to suggest certain measurements of the skirt block pattern drafting process for the Korean female fashion models, with the aim to improve its fit. For this purpose, the study carried out an analysis of the lower body features of a dress form developed for the study. This form was representative of Korean female fashion models' body features. The study performed a cross-sectional analysis at waist and hip levels and measured the angles from the frontal and lateral silhouettes of the dress forms. The comparisons of the skirt block patterns developed through draping by the use of 2 types of the dress forms developed and existed and through drafting according to the current patternmaking method have led to noticeable findings in terms of implementation of the skirt block drafting process for the Korean female fashion models. The results of the study are as follows: (1) the vertical lengths between the levels at the front waist point and the side waist point in the patterns are 0.7cm; (2) the vertical length between the levels at the front waist point and the back waist point in the back panel is 0.7cm; (3) the horizontal lengths between the perpendicular line from the side hip point and the side waist point in patterns are within a range of 2.0 to 2.2cm; (4) the horizontal length between the original and the adjusted back waist points moved into the waist line, in a range of 0.0 to 1.0cm, differs whether the center back line would be folded or sewn.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.180-183
• /
• 2006

The recognition of emotionality becomes so important that it is called 'emotional consumption society'. The emotional design, which is mostly concerned about users consensus and experiences, is understood from a interactive point of view, human, and space. Today, the emotional design is a new paradigm. From this point of view, this paper, which presents patterns analysis of outdoor lighting by the emotional design, applies expression techniques of the emotional design in Analysis process of outdoor lighting patterns. Also, this paper shows examples at analysis process.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1566-1574
• /
• 2019

Maximum power point tracking (MPPT) under the partial shading condition is a challenging research topic for photovoltaic systems. Shaded photo-voltaic module result in complex peak patterns on the power versus voltage curve which can misguide classical MPPT algorithms. Thus, various kinds of global MPPT algorithms have been studied. These have typically consisted of partial shading detection, global peak search and MPPT. The conventional partial shading detection algorithm aims to detect all of the occurrences of partial shading. This results in excessive execution of global peak searches and discontinuous operation of the MPPT. This in turn, reduces the achievable power for the PV module. Based on a theoretical investigation of power verse voltage curve patterns under various partial shading conditions, it is realized that not all the occurrences of partial shadings require a global peak search. Thus, an intelligent partial shading detection algorithm that provides exact identification of global peak search necessity is essential for the efficient utilization of solar energy resources. This paper presents a new partial shading determinant algorithm utilizing adaptive threshold levels. Conventional methods tend to be too sensitive to sharp shading patterns but insensitive to smooth patterns. However, the proposed algorithm always shows superb performance, regardless of the partial shading patterns.

• 대한치과보철학회지
• /
• 제36권6호
• /
• pp.858-866
• /
• 1998

Soldering is the usual method used to correct an unstable fixed partial denture framework at patient's try-in; However, presoldering base metal alloys is technique-sensitve and results are unstable because it is difficult to maintain uniform heat distribution and to prevent oxidation of an alloy. A cast-joining technique has been developed by Weiss and Munyon for repair, correction and addition to base metal framework. This joining technique eliminates the problem with presoldering of non-precious frameworks. The object of this study was to 1) compare the relative flexure strength and the joining effectiveness of Ni-Cr-Be cast in two pieces and 'pre-soldered' versus in two pieces and 'cast-joined'. 2) determine the effect of increasing the number of retentive grooves on the face of the cast and 3) determine the effect of the relative matched position of groove patterns on flexure strength. The joining effectiveness can be expressed by the ratio of the mean flexure stress of soldered or cast-joined specimens to that of one-piece cast. Resin rods 3mm in diameter were used as pattern of specimens for one-piece casted, presoldered, and cast-joined groups. Cast-joined specimens had two different patterns of retentive grooves on the joined faces. Type A had cross-shaped grooves 1mm in depth. 0.6mm in width. Type B was the same except for the addition of one more retentive groove. In the experiment connecting cast-joined specimens, half of specimens with type A pattern had their patterns on the faces of paired casts matched with each other as mirror image. With the rest pairs, it was proceeded that one of paired casts turned 45 degrees so that the patterns crossed. Half of specimens with type B pattern also had the patterns matched as mirror image; However, here, one of paired casts turned 90 degrees with the other pairs. Retentive groove in this study lacked the intentional undercuts, in contrast with the suggestion of Weiss and Munyon. The specimens were subjected to four-point flexural loading in an Instron testing machine. The midspan flexural stress was calculated at the point of initial plastic strain as determined from a strip-chart recorder or at the point of failure if this occured at a lower stress level. Within the scope of this study, the following results were obtained. 1. The presoldered group showed flexural strength at least 2 times higher than the cast-joined groups. Its joining effectiveness was 82%. 2. In cast-joined groups, the flexural strength of joints with type B patterns exhibited 1.5 times that of joints with type A patterns. Joining effectivenesses were 38% for type B patterns, 25-26% for type A patterns. 3. The relative matched position of groove patterns did not have any significant effect on flexural strength of the cast-joined specimens with either type A patterns or type B patterns(p>.05).

• 소음진동
• /
• 제8권4호
• /
• pp.623-631
• /
• 1998

The free vibration analyses of the isotropic and composite(CFRP, GFRP) rectangular plates with point supports at the free edge and middle position are performed. The natural frequencies and nodal patterns of plates with point supports are experimentally determined by impact testing using an impact hammer. To compare and verify these experimental results, the finite element analysis is also carried out. The effect of the point support position, the number of point supports, and the anisotropic parameters on the natural frequencies and nodal patterns of cantilevered rectangular plates are investigated.

• 한국IT서비스학회지
• /
• 제21권6호
• /
• pp.73-89
• /
• 2022

After COVID-19, the percentage of digital consumption has soared. Meanwhile, as the online platform market grows in size and digital commerce is activated, controversy over the "dark pattern" that induces consumers to do unintended things online continues. Dark patterns are deceptive design patterns that cause consumer rights and financial damage and can result in damaging fair market competition. As a result, the need to regulate dark patterns is raised not only by overseas regulators but also in Korea, and there are growing calls for strengthening consumer protection against dark patterns, with amendments to related laws being proposed by the National Assembly. On the other hand, there is no agreed definition of dark pattern from a normative point of view, and there is a concern that even legitimate advertising marketing activities of companies may be regulated, so a review of dark pattern regulatory measures is required. In this study, dark patterns were reviewed from a normative point of view and appropriate regulatory measures were analyzed. In particular, the problem of the dark pattern can be applied in a way that the market regulates and controls itself in consideration of the characteristics of the online platform. This study reviewed the possibility of self-regulation for dart patterns and proposed the role of each subject.