• 한국안전학회지
• /
• 제35권3호
• /
• pp.105-115
• /
• 2020

This study compares the difference of fit factors (FF) and visual acuity according to masks and eyeglasses preferences for 54 participants. We the precautions and behaviors of discomfort when wearing masks of eyewear wearers. Contact lens discomfort and priority action of complaints was investigated Glasses fitting factors is Optical Center Height(OH), Vertex Distance(VD) and Pantoscopic Angle(PA). We measured those factors and expressed by the ratio of standard point and change point. Quantitative fit factor was measured by Portacount Pro+ 8038. Also, we selected to 6 exercises among 8 exercises OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The pass/ fail criterion of FF was set at 100. Visual acuity(VA) test chart is developed by Chunsuk Han was used, Descriptive statistics was performed. Descriptive statistics(SAS ver 9.2), it is used geometric means, Wilcoxon analysis(P=0.05) When wearing the mask preferentially, fit factor(FF) was high according to the step of glasses fitting parameter. on the other hand, when the glasses first choice, the visual acuity(VA) was high. there was no significant difference. In the case of fit factor (FF), mask first choice/ glasses first choice is OH (p=0.671/ p=0.332), VD (p=0.602/ p=0.571) and PA (p=0.549/ p=0.607). Visual acuity (VA), mask first choice/ glasses first choice is OH (p=0.753/ p=0.386), VD (p=0.815/ p=0.557) and PA (p=0.856/ p=0.562). The workers of workplace and office chose glasses but occupational health workers and students chose mask. In case of discomforts, it was suggested to remove the mask and tolerate discomforts. The main discomforts and usual action of lens were dryness, hyperemia, foreign body sensation, ophthalmodynia, decreased vision and glasses wearing. Therefore, it is necessary to develop a mask wearing method education program considering glasses fitting and develop a hybrid model that minimizes inconvenience when wearing glasses and a mask at the same time.

• 한국염색가공학회지
• /
• 제6권2호
• /
• pp.55-62
• /
• 1994

The mend for fabric products has been increased remarkably with increasing population, housings, mutistory buildings,...and etc. during the last two decades. However, since fabrics are highly combustible and can produce toxic gases during the combution, fabric products can result in serious human injury as well as financial damage. Acknowledged by this, a new phosphorus based flame retardant suitable for PET fabric has been synthesized by making use of the reaction of diphenyl chloro phosphate and hexamethylenediamine. Since the starting meterials are relatively cheap and the yield of this reaction is high (more than 90%), this reaction seems to be very effective as wall as very economic. By analyzing various spectrophotometric analysis data such as NMR, FT-IR, and Mass, this new flame retardant is identified to be N,N’-Bis(diphenyl chlorophosphoro)diamino hexane. In the mean time, DSC measurement has shown that the melting point and the boiling point of this material are around 115$^{\circ}C$ and around 40$0^{\circ}C$, respectively. The flame retardancy test done on the PET fabric processed by this flame retardant have shown excellent in times of flame contact, times of flame contact for washable. The most economical finishing condition estimated 10% in concentration of BDPDH, Moreover, it has been also found that the drape stiffness of the PET fiber processed by the flame retartant is changed very litter compared to the unprocessed original PET fabrics. Judging from this, the potential of this new phosphrdus based compond as a flame retardant for PET fabric seems to be high.

• 대한기계학회논문집A
• /
• 제39권4호
• /
• pp.391-396
• /
• 2015

논문은 가장 보편화 되어있는 양문형 냉장고의 플랜지에서 이슬 맺힘 현상을 방지하기 위한 연구에 대한 논문이다. 양문형 냉장고는 냉동실과 냉장실을 분리하는 벽의 전면부를 플랜지라하고 여기에 양문의 개스킷이 밀착하여 냉기를 차단하는 역할을 한다. 플랜지의 철판에 맺히는 이슬을 방지하기 위해서 $35^{\circ}C$의 고온의 냉매가 흐르는 열선이 삽입된다. 하지만 열선을 삽입함에도 이슬 맺힘 현상이 계속되고 있는데 이것은 열선이 철판 하부에 밀착되지 않아 열선의 열이 철판 하부에 충분히 전달되지 않기 때문이다. 본 논문에서는 열선의 영향을 평가하고 열선과 철판 하부가 충분한 열전달을 할 수 있는 구조를 제안하고 그 타당한지 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.438-439
• /
• 2013

Microelectronic devices의 접촉저항의 향상을 위해 Metal silicides의 형성 mechanism과 전기적 특성에 대한 연구가 많이 이루어지고 있다. 지난 수십년에 걸쳐, Ti silicide, Co silicide, Ni silicide 등에 대한 개발이 이루어져 왔으나, 계속적인 저저항 접촉 소재에 대한 요구에 의해 최근에는 Rare earth silicide에 관한 연구가 시작되고 있다. Rare-earth silicide는 저온에서 silicides를 형성하고, n-type Si과 낮은 schottky barrier contact (~0.3 eV)를 이룬다. 또한, 비교적 낮은 resistivity와 hexagonal AlB2 crystal structure에 의해 Si과 좋은 lattice match를 가져 Si wafer에서 high quality silicide thin film을 성장시킬 수 있다. Rare earth silicides 중에서 ytterbium silicide는 가장 낮은 electric work function을 갖고 있어 낮은 schottky barrier 응용에서 쓰이고 있다. 이로 인해, n-channel schottky barrier MOSFETs의 source/drain으로써 주목받고 있다. 특히 ytterbium과 molybdenum co-deposition을 하여 증착할 경우 thin film 형성에 있어 안정적인 morphology를 나타낸다. 또한, ytterbium silicide와 마찬가지로 낮은 면저항과 electric work function을 갖는다. 그러나 ytterbium silicide에 molybdenum을 화합물로써 높은 농도로 포함할 경우 높은 schottky barrier를 형성하고 epitaxial growth를 방해하여 silicide film의 quality 저하를 야기할 수 있다. 본 연구에서는 ytterbium과 molybdenum의 co-deposition에 따른 silicide 형성과 전기적 특성 변화에 대한 자세한 분석을 TEM, 4-probe point 등의 다양한 분석 도구를 이용하여 진행하였다. Ytterbium과 molybdenum을 co-deposition하기 위하여 기판으로 $1{\sim}0{\Omega}{\cdot}cm$의 비저항을 갖는 low doped n-type Si (100) bulk wafer를 사용하였다. Native oxide layer를 제거하기 위해 1%의 hydrofluoric (HF) acid solution에 wafer를 세정하였다. 그리고 고진공에서 RF sputtering 법을 이용하여 Ytterbium과 molybdenum을 동시에 증착하였다. RE metal의 경우 oxygen과 높은 반응성을 가지므로 oxidation을 막기 위해 그 위에 capping layer로 100 nm 두께의 TiN을 증착하였다. 증착 후, 진공 분위기에서 rapid thermal anneal(RTA)을 이용하여 $300{\sim}700^{\circ}C$에서 각각 1분간 열처리하여 ytterbium silicides를 형성하였다. 전기적 특성 평가를 위한 sheet resistance 측정은 4-point probe를 사용하였고, Mo doped ytterbium silicide와 Si interface의 atomic scale의 미세 구조를 통한 Mo doped ytterbium silicide의 형성 mechanism 분석을 위하여 trasmission electron microscopy (JEM-2100F)를 이용하였다.

• Structural Engineering and Mechanics
• /
• 제26권6호
• /
• pp.673-685
• /
• 2007

Reinforced concrete beams can be strengthened in a structural retrofit process by attaching steel plates to their sides by bolting. Whilst bolting produces a confident degree of shear connection under conditions of either static or seismic overload, the plates are susceptible to local buckling. The aim of this paper is to investigate the local buckling of unilaterally-restrained plates with point supports in a generic fashion, but with particular emphasis on the provision of the restraints by bolts, and on the geometric configuration of these bolts on the buckling loads. A numerical procedure, which is based on the Rayleigh-Ritz method in conjunction with the technique of Lagrange multipliers, is developed to study the unilateral local buckling of rectangular plates bolted to the concrete with various arrangements of the pattern of bolting. A sufficient number of separable polynomials are used to define the flexural buckling displacements, while the restraint condition is modelled as a tensionless foundation using a penalty function approach to this form of mathematical contact problem. The additional constraint provided by the bolts is also modelled using Lagrange multipliers, providing an efficacious method of numerical analysis. Local buckling coefficients are determined for a range of bolting configurations, and these are compared with those developed elsewhere with simplifying assumptions. The interaction of the actions in bolted plates during buckling is also considered.

• 복식문화연구
• /
• 제22권2호
• /
• pp.209-224
• /
• 2014

This study aims to compare the ease of shirt patterns in the men's wear market that have been constantly developing, and to analyze the fitness and appearance through the 3D virtual try-on system. The study selected three industrial patterns and two educational materials of classic-fit and slim-fit shirts for a total of ten items. The experiments involved virtual wearing, a stress contact point perspective map, and appearance evaluations. First, the ease differed significantly in the chest, waist, and sleeve cap height according to the patterns. Second, based on the stress, contact point, and transparency, there was ease in the order of Nam, D-brand, J-brand, Park, and S-brand in the classic-fit shirts while the order of D-brand, Nam, J-brand, Park, and S-brand resulted in the slim-fit shirts. Third, in the appearance evaluation, higher points resulted in the order of J-brand, Park, S-brand, D-brand, and Nam in both classic-fit and slim-fit. The results showed that proper ease differs greatly by shirt-fit and target age. Also, the shirts with more ease tended to be evaluated less favorably in the appearance evaluation. Based on the results, the study suggests that the proper ease in chest circumference is 18cm for the classic-fit shirts and 6 cm for the slim-fit shirts.

• STI Policy Review
• /
• 제5권2호
• /
• pp.65-95
• /
• 2014

The recent decades have seen a growing rate of international cooperation in science, technology, and innovation (STI) including in the field of green technologies. However, current approaches to national systems of innovation (NSI) have not kept up with this development. International aspects are rather treated as external conditions within which policymakers operate and respond but not influence. This paper tackles this problem by applying a refined NSI concept that includes an international dimension and complements past frameworks by focusing on those Korean government policies, actors, and activities relevant for the internationalization of STI. Austria and Korea have both formulated differing strategies to acquire international leading positions in the field of innovation and the development of green technologies. In the first step, the paper assesses Korea's international activities within the field of green technologies that transcend national boundaries and establish international connections. The government has still a strong influence on selecting technology areas for strategic funding but our findings show that international STI actors have difficulties in identifying the appropriate point of contact to initiate cooperation or apply for related funding. Second, an external perspective on Korea's international collaborations in the field of green technologies is offered. Austria has tentatively identified the East Asian country as a second-priority cooperation partner for its future STI internationalization activities. Interviews with Austrian stakeholders in the field of green technologies indicate a high interest in cooperation with Korea that is facilitated by a similar business culture based on personal networks. Moreover, researchers and policymakers referred to a shared need of small countries for intelligent decision-making processes regarding potential cooperation partners abroad. However, in order to enhance awareness, visibility and demand for Korean STI cooperation in European countries, more long-term funding programs featuring a more permanent point of contact should be introduced.

• 한국음향학회지
• /
• 제38권3호
• /
• pp.302-307
• /
• 2019

현대 대잠전에 있어 잠수함에 대한 2차원 위치추정에 다양한 방법들이 있다. 잠수함에 대한 보다 효과적인 추적 및 공격을 위해 표적 심도는 매우 중요한 요소이다. 하지만 현재까지도 잠수함의 심도를 찾아낸다는 것은 어려운 일이다. 본 논문에서는 최단접근점(Closest Point of Approach, CPA) 전후의 표적 접촉방위와 표적 도플러 신호 등 다이파 소노부이 접촉정보를 이용한 잠수함 심도 추정 기법을 제안하고자 한다. 표적의 상대심도는 표적과 다이파 소노부이의 청음기 간 사선거리 및 수평거리에 피타고라스 정리를 적용하여 결정된다. 이때 사선거리는 도플러변이와 표적 속도에 의해서 계산되며, 수평거리는 표적에 대한 연속된 접촉방위와 표적의 이동거리에 삼각함수를 적용하여 얻을 수 있다. 본 논문에서 제시된 알고리즘의 성능은 소노부이-표적 간 수평거리 및 상대심도에 의해 결정되는 고각과 도플러 변이 값의 측정 정확성에 의해 좌우됨을 시뮬레이션을 통해 알 수 있다.

• 한국의류산업학회지
• /
• 제25권2호
• /
• pp.248-254
• /
• 2023

This study aims to measure the skin rigidity of different facial areas among Koreans and propose guidelines for each area's skin rigidity that can be applied with a facial robot for testing respiratory protective devices. The facial skin rigidity of 40 participants, which included 20 men and 20 women, aged 20 to 50, was analyzed. The rigidity measurement was conducted in 13 facial areas, including six areas in contact with the mask and seven non-contact areas, by referring to the facial measurement guidelines of Size Korea. The facial rigidity was measured using the Durometer RX-1600-OO while in a supine position. The measurement procedure involved contacting the durometer vertically with the reference point, repeating the measurement of the same area five times, and using the average of three values whose variability was between 0.4 and 4.2 Shore OO. The rigidity data analysis used precision analysis, descriptive statistics analysis, and mixed-effect ANOVA. The analysis confirmed the rigidity of the 13 measurement areas, with the highest rigidity of the face being at the nose and forehead points, with values of 51.2 and 50.8, respectively, and the lowest rigidity being at the chin and center of the cheek points, with values of 19.2 and 20.7, respectively. Significant differences between gender groups were observed in four areas: the tip of the nose, the point below the chin, the area below the lower jaw, and the inner concha.

• 무역학회지
• /
• 제42권4호
• /
• pp.159-184
• /
• 2017

OECD는 투자위원회를 중심으로 각국 NCP들이 OECD 가이드라인을 효과적으로 이행하기 위한 일환으로 NCP 간 동료평가(Peer Review)를 강조하는 추세이다. 각 NCP로서는 동료평가가 자발적인 성격이라고는 하지만 부정적인 평가를 받게 되는 경우 국제적으로 많은 비난을 받을 소지가 크고 국가 이미지에도 심각한 타격을 입을 가능성이 높다. 더군다나 지난 2017년 3월, 기업책임경영에 관한 작업반(Working Party on Responsible Business Conduct) 회의에서 한국 NCP에 대하여 2019년 동료평가를 시행하기로 결정하였다. 이에 본 논문에서는 NCP 동료학습의 의의와 현황, 최근 시행되었던 덴마크와 벨기에 동료평가 사례들을 검토함으로써 우리 정부가 2019년 동료평가에 어떻게 대비해야 하는지 정책적 제언을 하고 있다.