• Journal of Platform Technology
• /
• 제11권1호
• /
• pp.52-59
• /
• 2023

최근 전염성이 높은 COVID-19 바이러스의 영향으로 접촉자 추적에 사용할 수 있는 시공간 궤적에 대한 중요성이 커지고 있다. 시공간 궤적은 객체가 이동한 시간 및 공간 데이터를 저장한다. 본 논문에서는 이동 객체의 시공간 궤적에 대한 질의 처리를 제안한다. 이동 객체의 시공간 궤적 모델은 위치를 저장하기 위하여 포인트 형태의 공간 데이터를 가지고 타임스탬프 형태의 시간 데이터를 가진다. 궤적 질의는 같은 버스에 탑승하여 서로 밀접하게 접촉한 사용자들의 쌍을 검색하는 질의이다. 궤적 질의를 처리하기 위하여 데이터셋으로는 마이크로소프트의 Geolife 데이터를 사용한다. 제안된 궤적 질의 처리는 궤적 데이터를 날짜별로 나누고 각 날짜에 대해 사용자의 궤적들이 근처에 있었는지 검사하고 접촉자들에 대한 정보를 결과로 생성한다.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2373-2379
• /
• 2023

In sodium systems, leakage is one of the safety concerns; it can cause chemical reactions, which may result in fires. There are contact and non-contact types of leak detectors, and the conventional method of non-contact type detection is by gas sampling. Because of the complexity of this method, there has always been a need for a simple gas sensor, and the resistive-type nanostructure ZnO sensor is a promising option with various advantages. In this study, a ZnO sensor was fabricated, and the concept was tested as a leak detector using a dedicated experiment facility. The experiment results showed distinctive changes in resistance with the presence of sodium aerosol under various conditions. Replacing the conventional gas sampling with the ZnO sensors is expected to enable identification of the leakage location if used as a point-wise instrumentation and to greatly reduce the total cost, making the system simple, light, and effective. For further study, more tests will be performed to evaluate the sensitivity of key parameters under various conditions.

• Tribology and Lubricants
• /
• 제19권3호
• /
• pp.123-132
• /
• 2003

The effect of surface texture on elastohydrodynamic lubrication (EHL) point contact of a ball Joint mechanism in small reciprocating compressors is studied numerically by using multigrid method. Pressure and film thickness profiles have been calculated for surface roughness with waviness of different orientations and transverse ridge and dent at minimum and maximum Hoes M parameter conditions. The influence of the amplitude and the wavelength of the surface roughness was also studied. Results show that the oblique waviness with orientation angle of 30$^{\circ}$generates the smallest minimum film thickness as compared with those of longitudinal, transverse, and other oblique roughness. The influence of transverse waviness on the minimum film thickness is smaller than for the longitudinal waviness case.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1894-1904
• /
• 2011

The Light Rail Transit (LRT) System which has medium transport capacity between subway and bus(5,000-25,000 persons per hour) is the most advanced transportation system. It has many benefits, cheap construction, operational costs through driverless and flexible route planning. Also, the rubber tired AGT (K-AGT) of various LRT has a rubber wheels and side guide. The side guide type has an many advantages. but occur a vibration and friction noise through contact between guide rail and wheel. Most of point that decreased comport is vibration thorough the guide contact. In this paper, It is purpose to improve the maximum running speed of rubber tired AGT localization bogie which is currently developed from 70km/h to 80km/h. To satisfy comport index of railway vehicle that is required in performance test. we examined coefficient of bogie suspension which is designed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.768-771
• /
• 1997

Geometric probing addresses the problem of determining geometric aspects of a structure from the mathematics and results of a physical measuring device such as a probe. This paper presents a new algorithm to recognize the shape of an unknown object by using a robot hand with a force and torque sensor. The new algorithm is called S.E.P.(Shape Exploration Procedure) which finds the global shape of an unknown object. The proposed method is composed of three major parts, finding contact informations such as contact point, calculation of shape information such as curvature, and expression of global shape from these informations. Comparing with the conventional approaches, the advantages of the proposed method are explained and verified by conducting experiments with a 3-dof SCARA robot.

• 센서학회지
• /
• 제23권6호
• /
• pp.402-408
• /
• 2014

Heart rate is one of the most important signal to monitor the health condition of the patient or exerciser. Various wearable devices have been developed for the continuous monitoring of ECG signal from human body during exercise. Among these, ECG chest belt has been widely used. However wearing chest belt with ECG sensor is uncomfortable in normal life due to the electrode contact between metal electrodes of ECG sensor and skin of the human body. So we develop the royal healthcare backpack that can measure ECG signal without skin contact by using capacitor-type ECG sensor. The position of the measurement point is critical to collect a clear ECG signal in the capacitive ECG measurement from backpack. Various tests were conducted to find the optimal ECG measurement position which has less noise and could get strong and clear ECG signal during exercise, walking, hiking, mountain climbing and cycling.

• 조명전기설비학회논문지
• /
• 제15권5호
• /
• pp.61-67
• /
• 2001

여자자속의 포화는 전자레인지에 사용되는 고압 변압기의 초기 입력 전원의 위상에 의존한다. 고압트랜스의 돌입전류를 제한하기 위해서는 릴레이의 접점을 입력전원위상의 최저점일 때 ˝ON˝하여야 한다. 개선된 회로는 보정된 인터럽터 신호를 마이컴의 입력으로서 릴레이의 접점이 돌입전류가 최소 일 때 ˝ON˝한다. 실험결과는 입력전압변동모드에 대해서 개선된 회로가 설계목표치 50[A]를 만족함을 나타내었다. 그리고 통계적 기법으로서 이를 검증한다.

• 대한가정학회지
• /
• 제40권3호
• /
• pp.21-40
• /
• 2002

The aim of this interdisciplinary study is to understand the relationship between the social behavior patterns and space elements, specially micro-housing sociological point of view. It analyzed korean typical floorplans in the apartment housing, focused on the 4-criteria contact or isolation between the individual persons, communication between the generations, hierarchy of the gender and socialization with neighbourhood. It determinate concrete space elements involved correspondent factors with users' social behavior. By reviewing those factors found, it is suggested also the planning concept, that response users' social orientation. As the practical alternatives, some prototypes have been developed not only for improvement of housing plans, but also for resonable housing supply and sustainable usage.

• 한국의류학회지
• /
• 제27권2호
• /
• pp.239-249
• /
• 2003

The purpose of this research was to investigate influential factors for shopmaster's CRM (Customer Relationship Management) in the designer brand products, and to indicate the future fashion marketing strategies. The questionnaires were distributed to 74 shopmasters of the Designer shop in domestic L. S and H Department stores. Descriptive statistics, factor analysis, and path analysis from Lisrel program were used to analyze the data. The results were as follows; Firstly. for shopmaster's CRM variables, four factors of customer management variables were found and labeled as interest, DB construction, contact opportunity, and materials. Also, four (actors of shopmaster's knowledge regarding apparel materials were found and labeled as professionalism, manner, sense, and persuasion. For service variables, four factors such as precision, variety, rapidity, positiveness, and convenience of shopping were found. Secondly, for the results of hypothesis, all of the independent variables had direct influences on forming the relationship with customers. Therefore, it is concluded that the main elements of Shopmaster's CRM are highly important variables in customer relationship marketing strategy.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.91-98
• /
• 2008

Hypoid gears are widely used in rear drive and 4WD vehicle axles. Investigation of their sensitivity to deflections is one of the most important aspects of their design and optimization procedures. The deflection test is performed in the actual gear mounting using completely processed gear. This test should cover the fun operating range of gear loads from no load to peak load. Under peak load the contact pattern should extend to the tooth boundaries without showing a concentration of the contact pattern at any point on the tooth surface. Transmission error is tested on an axle assembly triaxial real car load condition.