• 제목/요약/키워드: point process

검색결과 6,656건 처리시간 0.034초

영.유아용 식품원료의 Bacillus cereus와 일반세균 모니터링 및 제조공정 중 미생물 품질제어 (Monitoring Bacillus cereus and Aerobic Bacteria in Raw Infant Formula and Microbial Quality Control during Manufacturing)

  • 정우영;엄준호;김병조;주인선;김창수;김미라;변정아;박유경;손상혁;이은미;정래석;나미애;육동연;강지연;허옥순;윤민호
    • 한국식품과학회지
    • /
    • 제42권4호
    • /
    • pp.494-501
    • /
    • 2010
  • 영 유아용 식품에 주로 사용되는 원료에 대한 미생물 오염도를 조사한 결과, 총 10종(n=20)의 원료 중 B. cereus가 검출된 원료는 2종(n=4, 20%) 이었고, $1.02{\pm}1.36\;\log\;CFU/g$으로 나타났으며, B. cereus가 검출된 원료로는 organic brown rice powder(C사)와 mixed orgarnic vegetable powder(C사) 이었다. 미생물이 검출되지 않거나 낮게 검출된 원료는 제조공정에 살균, 분무건조, 팽화 및 압출 등의 열처리 공정이 있었다. 각 원료에 대한 일반세균수를 알아보기 위해 10종(n=20) 검사결과 4종(n=8) 검출(40%)되었으며, $3.21{\pm}3.64\log\;CFU/g$으로 나타났다. 원료에서 분리한 미생물 분포를 조사한 결과 총 11종이 분리 되었으며, 분리된 일반세균 중 76%를 차지하는 우점종은 S. paucimobilis, P. fluorescens, R. radiobactor, St. maltophilia 순으로 나타났다. 본 연구에서는 영 유아식의 미생물 안전성 확보를 위해 원료 생산공정에 살균 등의 열처리 공정이 필요하며, 미생물에 오염된 원료를 사용할 경우에도 생산공정에 드럼건조(drum surface temperature: $100-135^{\circ}C$), 분무건조(inlet air temperature: $135-204^{\circ}C$), 살균(pasteurization, UHT $130-150^{\circ}C$/1-4 sec), 미생물 저감화 방안의 제조공정을 거쳐 생산된 제품은 일반세균, 대장균군, B. cereus가 검출되지 않아 안전한 제품의 생산이 가능하였다. 또한, 영 유아용 식품을 제조할 경우 명확한 살균조건을 설정하고, 공정품의 품질평가를 거쳐야만 제품의 안전성을 확보할 수 있을 것으로 보인다.

중년여성복업체(中年女性服業體)의 맞춤복(服) 생산실태(生産實態) 연구(硏究) (A Study on the Realities of Custom-made Clothing Production in Middle-aged Women's Clothing Firms)

  • 박유정;손희순
    • 패션비즈니스
    • /
    • 제6권2호
    • /
    • pp.1-16
    • /
    • 2002
  • The need for ready-to-wear clothing increases as the problem comes to arise from the fit of custommade clothing due to the characteristics of middle-aged women's somatotype. At this point of time, a study on the realities of production of custom-made clothing in middle-aged women's clothing business firms is of very greatly significance. Therefore, this study was intended to identify the problem and improvements through the survey research of production of custom-made clothing in middle-aged women's clothing business firms and further present the plan for development of custom-made clothing business. The questionnaire was framed based on the contents extracted from the preliminary questionnaire research for the pattern section chief of each business firm. Collected data were statistically processed using the SPSS 10.0 Windows program. As a result, the following findings were obtained: 1. The target age of the middle-aged women's clothing business firms ranged from more than 45 years to less than 50 years of age. Clothing business firms much made inroads into the ready-to-wear clothing market largely in the 1980s and the 1990s. Their active entry into the custom-made clothing market occurred in the 1970s and the 1980s. 2. In terms of the clothing production method of middle-aged women's clothing firms, some private boutique and designer brand clothing firms entered the clothing market with a focus on custom-made clothing in the beginning of its organization and introduced the production method of ready-to-wear clothing in accordance with changes in production methods and consumers' needs and wants. National brand clothing firms manufactured clothing with a focus on ready-to-wear clothing from the beginning of its organization, but at last they manufactured both partial custom-made and whole custom-made as the problem arose from ready-to-wear clothing. Seeing that their clothing production showed the ratio readyto-wear to custom-made clothing of 2.58:1. And it was found that the manufacture of ready-to-wear and custom-made clothing took into consideration the great difference in the pattern, size and design plan. The research of the clothing production process showed that whole custom-made and partial custommade were distinguished according to whether or not the sample was presented. 3. The ready-to-wear pattern of middle-aged women's clothing firms were used with a focus on the 'patternmaker-developed pattern' and company-developed pattern'. Most clothing businesses produced clothing in 4 to 5 basic sizes, which is found to be insufficient to complement the physical characteristics of middle-aged women with many specific somatotypes. In the pattern of custom-made clothing, the 'pattern of ready-to-wear were applied' or the 'customized pattern was developed'. Actual measurements were most used as the size of custom-made, and accordingly it is predicted that the level of satisfaction is higher with the fit of custom-made clothing than that of ready-to-wear. The selling place and the head office showed the similar percent as the place for measuring the size of custom-made clothing. Size measurers were mostly the shop master. And it was found that most clothing business firms had a problem when the measured size was applied to the pattern. Accordingly, it is necessary to provide education on size measurement for shop masters. 4. It was found that in the middle-aged women's clothing firms, the pattern correction of the length of sleeve, jacket and slacks occupied the highest percent. Accordingly, it is necessary to provide for the size system to complement the accurate somatotype characteristics of middle-aged women. 5. In custom-made clothing customer management, most firms engaged in customer somatotype management through size management. They provided customers with commodity information by informing them of the sales and event period and practiced human management for customers by maintaining the get-together and friendly relationship. 6. Middle-aged women's clothing businesses responded that it would be necessary to improve the fit of custom-made clothing and complement their pursuit for individuality as the plan to improve its quality. In consequence, it suggests that middle-aged women's clothing businesses should provide middle-aged women with the clothing of better-suited size and refined design. Middle-aged women's clothing businesses responded that it was the most urgent task to form the custom-made clothing manufacturing team as the plan to expand the custom-made clothing market, which is identified as their emphasis on the systematized production of custom-made clothing.

사염화에틸렌(PCE)으로 오염된 국내 4개 지역 지하수 내 생물학적 PCE 탈염소화 활성 및 미생물 군집의 비교 (Evaluation of Microbial PCE Reductive Dechlorination Activity and Microbial Community Structure using PCE-Contaminated Groundwater in Korea)

  • 김영;김진욱;하철윤;권수열;김정관;이한웅;하준수;박후원;안영호;이진우
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제10권2호
    • /
    • pp.52-58
    • /
    • 2005
  • 본 연구는 사염화에틸렌(Perchloroethylene) 또는 트리클로로에틸렌(Trichloroethylene)으로 오염된 국내 지하수 내에 국외에서 보고된 환원성 탈염소화 미생물의 존재 유무와 사염화에틸렌의 생물학적 탈염소화 활성도를 평가하였다. 마이크로코즘 테스트(microcosm tests)는 4개의 오염지역(창원 A, 창원 B, 부천 및 양산) 지하수와 다양한 전자공여체 (sodium lactate, sodium propionate, sodium butyrate, sodium fumarate)를 이용하여 수행하였다. 단일 전자공여체 와 창원 A 혹은 창원 B 지하수를 주입한 전 마이크로코즘에서 사염화에틸렌 완전 탈염소화 분해 시 발생하는 최종 산물인 에틸렌이 배양 90일 후에 검출되었고, 부천 혹은 양산 지역의 지하수를 주입한 마이크로코즘에서는 배양 90 일 후 시스-1,2-디클로로에틸렌(cis-1 ,2-Dichloroethylene)만이 검출되었고, 염화비닐(Vinyl chloride) 과 에틸렌은 검출되지 않았다. 완전 탈염소화 생분해가 확인된 창원 B 지역 지하수와 불완전 탈염소화 생분해가 확인된 양산 지역 지하수 내 미생물 군집을 비교하기 위해 분자생물학적 방법을 이용한 실험을 수행하였다. 창원 B 지역 지하수의 클론 라이브러리(Clone library)에서 사염화에틸렌 완전 탈염소화 미생물, uncultured bacterium clone DCE47과 매우 유사한 염기서열 클론이 확인되었다. 그러나 양산 지역의 클론 라이브러리에서는 기존의 염화에틸렌 탈염소화 미생물과 유사한 염기서열 클론이 확인되지 않았다. 본 연구 결과를 통하여 국내 일부 지역의 지하수 내에 사염화에틸렌을 완전 탈염소화하여 무해한 에틸렌으로 분해하는 미생물이 존재함을 확인하였고, 적절한 전자공여체를 공급하는 경우 그 분해 활성도가 증가함을 확인하였다. 이 결과는 사염화에틸렌 혹은 트리클로로에틸렌으로 오염된 국내 지하수를 경제적인 공법인 환원성 탈염소화 생물학적 공정으로 복원할 수 있는 기능성을 보여주는 중요한 지표라고 사료된다.

가속도를 고려한 도로의 설계일관성 평가기법에 관한 연구 (Development of Highway Safety Evaluation Considering Design Consistency using Acceleration)

  • 하태준;박제진;김유철
    • 대한교통학회지
    • /
    • 제21권1호
    • /
    • pp.127-136
    • /
    • 2003
  • 본 연구는 3차원의 실제 도로형상을 고려하여 일관성을 평가하는 방법으로 가속도 개념을 사용하였다. 차량의 운행과 운전자가 받는 느낌을 근거로 가속도는 안전에 커다란 영향을 미친다. 특히. 운전자를 중심으로 가속도의 크기는 상당한 영향 요소로서 작용되어진다. 이를 근거로 3차원 도로상에서의 각 지점의 가속도를 계산하고 일관성 평가 방법을 제시하였다. 가속도의 계산은 3차원의 변위를 각각 계산하여 변위에 대한 벡터의 합으로 정의하였고 곡선부 내에 속도 예측모형(정준화, 2001)을 사용하여 속도 프로파일을 작성하고 이 프로파일을 근거로 각 지점의 속도를 정하여 가속도를 구하였다. 일관성 평가는 기존의 연구에서 3차원 가속도의 범위를 정하고 g-g-g diagram을 작성하여 해당 범위에 벗어나는 것을 일관성에 어긋나는 것으로 간주하고 평가의 방법을 제시하였다. 본 연구에서는 최소 설계 기준을 바탕으로 가상의 도로를 예시로 들어 가속도의 변화를 계산함으로서 일관성 평가 방법을 적용하였으나 해당 방법이 한계가 드러나 있는 기존의 속도 예측모형을 사용하고 있어 기타의 차량 상태(서스펜션, 타이어, 차종 등)를 고려하지 못하기에 정확한 가속도의 값을 제시하지는 못한 실정이다. 그러나 속도 프로파일만 정의되어지면 복합곡선, 완화곡선 등의 모든 도로형상에 대하여 가속도를 계산함으로서 이를 도로의 일관성 평가에 사용이 가능할 것이나 현재는 3차원 형상이 고려된 속도예측모형과 복합선형 등이 고려된 속도예측모형을 제시할 수 있을 것이다. 향후에는 이러한 속도예측모형이나 속도프로파일모형에 관한 연구가 계속 이루어져야 하고 실험차량을 통한 일관성 평가의 정확한 기준의 개발과 검증이 요구된다.

형법상 제조물책임과 인과관계의 확정 (Product Liability and Causation in Criminal Law)

  • 이석배
    • 의료법학
    • /
    • 제17권2호
    • /
    • pp.3-28
    • /
    • 2016
  • 민사법에서 제조물 책임이 전문용어로 정착된 반면, 형사법에서는 일반적으로 받아들여진 전문용어는 없다. 민사법에서 제조물책임과 달리 형사책임에서는 개개인의 책임성과 규범질서의 장애가 중요하다. 즉 구체적인 개개인의 의무위반행위가 그리고 제조물이 법익위태화 또는 법익침해라는 결과를 야기했다는 인과관계가 입증되어야 한다. 형법에서 제조물 책임은 일반 거동범을 제외하고는 상해죄 또는 과실치상죄, 살인죄 또는 과실치사죄가 주로 문제가 된다. 물론 결과발생과 관련된 행위가 작위인지 부작위인지 구별되어야 하고, 그 행위와 결과사이에 인과관계가 입증되어야 하며, 고의 혹은 과실도 인정되어야 한다. 이 글에서는 우리나라, 독일, 스페인 등에서 실제로 문제가 되었던 판례들을 분석하여 인과관계의 확정에서 드러난 문제점을 중심으로, 특히 제조물과 관련된 형사책임을 인정하기 위한 핵심문제인 인과관계의 문제를 중심으로 살펴보았다. 이 글에서는 인과관계의 검토단계를 자연과학적 인과법칙과 규범적 인과관계로 나누어 2단계로 검토하는 견해를 따랐다. 이 절차에 따른 제조물의 형사책임을 인정하기 위한 인과관계의 입증은 우선 그 제조물의 특정물질이 결과발생을 야기할 수 있는 일반적인 위험성이 있어야 하고, 그것을 전제로만 구체적인 사안에서 인과관계의 검토가 의미가 있는 것으로 보았다. 일부 판례와 학설에서 나타나는 것처럼, 일반적 인과관계 자체가 전혀 존재하지 않는 경우에도 자유심증에 의해 구체적 인과관계를 확정한다고 하더라도 일반적 인과법칙에 반하는 것이 아니며, 법관의 심증을 경험법칙보다 우위에 놓은 것도 아니므로 구체적 인과관계의 인정이 가능하다는 견해가 있다. 하지만 이 글은 구체적 인과관계를 인정하기 위한 전제인 객관적이고 합리적으로 의심없는 인과법칙이 존재하지 않는다면 법관은 "의심스러울 때는 피고인의 이익으로(in dubio pro reo)" 원칙에 따라 무죄를 선고해야 하며, 사실상 입증책임의 전환의 효과가 있는 자유심증이라는 방식으로 객관적으로 입증되지 않는 사실에 대한 부담을 피고인이 지도록 하는 것은 허용되지 않는다는 입장을 취하였다. 법관의 임무는 인과관계가 100% 확실하다는 데 대한 합리적 의심이 없어야 한다는 것으로 보기 때문에 인과관계를 추정하는 것이지만, 일반적 인과관계가 100% 확실한 것을 의미하는 것이 아니라 통계적으로 유미의한 인과관계가 있다는 점을 인정하는 것이 라는 점을 강조하였다.

  • PDF

강원도 지역 산불발생인자의 지역별 유형화 (Regional Analysis of Forest Eire Occurrence Factors in Kangwon Province)

  • 이시영;한상열;안상현;오정수;조명희;김명수
    • 한국농림기상학회지
    • /
    • 제3권3호
    • /
    • pp.135-142
    • /
    • 2001
  • 이 연구는 강원도 지역의 시계열 기상자료와 산불발생현황자료를 이용하여 시ㆍ군별 산불발생유형을 구분하고자 지역간 기상요인과 발생원인 그리고 산불발생 일을 근거로 한 지역별 유형화 구분을 목적으로 시도되었다. 기상요인에 의한 산불발생 유형화에서는 최근 6년간의 강원도 소재 기상대의 기상자료를 적용하였으며, 지역과 산불발생원인과의 관련성 규명과 산불발생일의 불일치계수를 이용한 수량화된 다차원척도법 유형화에서는 최근 10년간의 산불발생현황자료를 적용하였다. 연구결과를 요약하면 다음과 같다. 첫째, 강원도 동해안산불과 같은 대형산불에 관련되는 기상요인으로는 평균온도, 최저온도, 최저초상온도, 평균풍속, 최대풍속 등으로 규명되었다. 둘째, 산불발생원인과 지역간의 관계를 도식화한 대응일치분석 결과에서는 지역과 산불발생원인과의 관계에서 가장 확연히 구분되는 지역으로는 '강릉'의 경우로 '방화'와 깊은 관련이 있는 것으로 나타났으며, '삼척'은 '입산자실화'와 '철원', '화천', '양구'지역은 군사훈련과 관계하는 것으로 보여지며, '속초'와 '춘천'의 경우에는 '쓰레기 소각'과 '담뱃불'이 타지역보다 밀접한 관련성이 있는 것으로 나타났다. 마지막으로 산화발생일을 근거로 각 시ㆍ군의 산불발생 유사성 정도 및 유형화 구분을 위한 다차원척도법 적용결과에서는 강원도 18개 시ㆍ군 지역이 5개의 유형으로 분류되었는데, 유형 I로 구분된 지역으로는 삼척, 강릉, 춘천, 원주, 홍천, 횡성으로 나타났으며, 유형 Ⅱ는 동해, 태백, 양양, 평창지역, 유형 Ⅲ은 정선, 철원, 화천지역, 유형 Ⅵ는 고성, 인제, 양구지역이, 그리고 마지막으로 유형 V는 속초와 영월지역으로 구분되었다. 지금까지의 도출된 연구결과들은 산불현황자료와 기상자료를 기초로 하여 도출된 결과를 근거로 제시하였고, 지역별 산불발생 특성을 보다 체계적으로 구분하기 위하여는 이외에도 지역별 임상요인과 지형 및 사회적 요인에 대한 검토들이 병행되어야 할 것으로 판단된다.의 경쟁이 생장에 영향을 미치는 것이 사실이다. 따라서 앞으로의 연구에서는 지형, 토양, 미기후 조건, 그리고 임목 간의 경쟁관계가 종합적으로 고려된 환경요인에 의한 생장특성을 파악하는 연구가 필요하다. 아울러 본 연구에서와 같이 지형기후학적 방법에 의하여 추정된 미기후를 통하여 보다 정확한 결과를 얻기 위해서는 무인자동기상관측 망의 설치를 통하여 이를 검증하는 작업이 필요하다.deling of self-similar traffic.ti colored dan have been produced after 1960's. Around the end of 1980's, automatic shuttle change loom have been generalized and 7 color dan(칠색단), 9 color gumsadan (구색금사단) have been current in multi colored dan. In terms of materials, synthetic and chemical textiles had been used widely and alter 1980's most fabrics, of which the ground weave is not being woven with satin-weave but being woven with plain or twill-weave, are named Dan in general.Standards for Livestock Products of Korea". The measured mean concentrations of Ca, Fe, Zn were generally higher than lower limit of labeled value(above 80% of labeled value). The mean concentration of sodium was lower than upper limit of labeled value(below 120% of labeled value).

  • PDF

산지목장 방문자의 목장 경관 기대와 목초지 및 초지시설 만족도에 관한 연구 : 양떼목장 방문객의 경우 (Studies on Hilly Pasture Landscape Expectancy, Satisfaction of Tourist on Grassland Facility: A case Study of Yangtae Farm Visitor)

  • 강대구;이효진;이효원
    • 한국초지조사료학회지
    • /
    • 제37권1호
    • /
    • pp.68-79
    • /
    • 2017
  • 첫째, 방문응답자은 여자, 40대, 사무직, 기혼, 대졸이 가장 많았다. 둘째, 목가적 초원에 대한 기대는 연령별로 차이가 있었으며, 가축을 방목하는 드넓은 초원이 모든 연령집단에서 가장 많았으나, 평균보다 높은 집단은 30대뿐이었고, 다른 집단은 모두 낮았으며, 가장 낮은 집단은 50대였다. 셋째, 초지의 색깔은 잡초, 야생화가 어우러진 다양한 색과 공원의 잔디밭 같은 녹색이 41%정도로 두 가지 유형이 80%이상의 응답을 차지하고 있었다. 넷째, 선호하는 초지형태는 연령에 따라 차이가 있었는데, 20대미만과 50대는 끝이 보이지 않는 넓은 면적의 초지, 40대와 60대 이상은 산림이 둘러싸여있는 구릉지 초지, 20대는 넓은 면적의 초지와 구릉지 초지가 동일하게 가장 많았으며, 30대는 구릉지초지와 초지사이에 나무가 적당히 섞인 초지가 동일하게 가장 많은 지지를 받았다. 다섯째, 방목형태는 연령별로는 20대, 30대는 양, 젖소, 말의 혼목을 가장 많이 선호하였고, 40대, 50대, 60대 이상은 양, 염소, 유산양 혼목을 원했으며, 20대미만은 양, 염소, 유산양 혼목과 양, 젖소, 말 혼목을 모두 가장 많이 선호하였다. 결혼여부에 따라서는 가장 많이 선호하는 경우는 양, 젖소, 말의 혼목이 모두 높았으나, 결혼경험이 있는 집단은 양만 방목하거나, 양, 염소, 유산양 혼목이 평균치보다 높았으며, 미혼집단은 양, 젖소, 말의 혼목, 양과 토끼 혼목, 기타의 경우가 높았다. 여섯째, 선호하는 목장유형은 성별과 연령별로 5%수준에서 유의차가 있었고, 집단별 선호도에서는 각각 가장 많은 경우가 양떼방목이었으나, 남자보다는 여자가 보다 많았고, 연령별로는 30대, 40대, 50대 연령집단이 평균보다 많았으며, 20대, 20대미만, 60대 이상은 평균보다 낮았다. 일곱째, 목장의 목책은 생나무에 쳐진 둥근 철사목책, 나무에 쳐진 철사목책, 철조망 목책 순이었고 가시 있는 철조망목책, 철사로 된 전기목책, 기타는 5%미만이었다. 목책기둥의 재료와 색은 결혼여부에 따라서 5%수준에서 유의차가 있었다. 가장 선호하는 목책은 모두 나무 목책을 선호하였으나, 미혼자는 검정색 방부처리기둥, 시멘트기둥을 선호하였고, 결혼경험자는 흰색금속재기둥, 흰색목재기둥, 나무목책을 선호하였다. 여덟째, 직업별이나 결혼여부별로는 모두 가장 많이 선호하는 것은 흙길이었다. 평균보다 높은 직업은 사무직과 기타였고, 학생, 기술직, 자영업, 전문직은 낮았으며, 결혼경험자의 흙길의 선호가 보다 높았다. 목장길 옆의 초생의 형태는 긴 목초가 있는 길을 가장 많이 선호하는 경우는 20대미만이고, 그 외집단은 야생화와 목초가 혼재된 길을 선호하였으며, 학생을 제외한 다른 직업들은 야생화와 목초가 혼재된 길을 선호하고 학생은 긴 목초형을 선호하였다. 아홉째, 목장방문자의 만족도는 가장 마음에 들었던 부분은 체험프로그램이나 양과의 접촉보다는 경관요소를 만족했다.

경남 지역 암센터와 보건소 재가암환자 관리 서비스와의 연계 사업 (Assessment of the Effect of a Public Health Clinics' Home-Based Terminal Cancer Patient Management in Collaboration with a Regional Cancer Center)

  • 송하나;강명희;이경원;김훈구;이원섭;강정훈;강윤식;은영
    • Journal of Hospice and Palliative Care
    • /
    • 제16권1호
    • /
    • pp.10-19
    • /
    • 2013
  • 목적: 경남지역 암센터와 경남지역 각 보건소와의 말기암환자를 대상으로 시행한 연계 사업을 담당자를 대상으로 한 설문조사를 통해서 평가하고자 하였다. 방법: 2008년 1월 1일부터 2011년 12월 31일까지 경남지역 암센터와 연계 사업 협약을 체결하고, 환자를 등록해서 진행한 보건소 실무자를 대상으로 진행하였다. 총 9개 지역 보건소의 실제 사업에 참여한 경험이 있는 재가암 담당자 20명을 대상으로 설문지를 개발하여 조사를 하였다. 각 문항의 평가는 Likert 5단계 척도를 변형하여 단계마다 -2에서 +2까지 점수를 부여하였고, 각 문항의 총점은 40점이었다. 결과: 2008년 1월부터 2011년 12월까지 73예(72예는 경남지역 암센터, 1예는 보건소에서 등록)가 연계되었다. 서비스에 대한 평가로 환자나 가족들의 심리적 안정에 도움이 된다라는 항목이 23점으로 가장 높았고, 전반적으로 재가암 사업에 도움이 된다는 점이 11점으로 가장 낮게 나왔다. 연계 서비스에 대한 개선 문항으로는 입원 절차의 간소화가 35점, 환자 병원 방문 시 실질적 혜택 제공이 34점으로 높게 나온 반면, 보건소의 인력 강화가 4점으로 가장 낮게 나타났다. 결론: 말기암환자를 대상으로 한 경남 지역 암센터-보건소 재가암 쌍방향 서비스는 몇 가지 한계점을 드러내었다. 보다 나은 연계 서비스를 위해서는 이번 연구를 통해 나타난 여러 점들을 개선하고, 또 지역 실정에 맞는 모델을 개발하는 등의 노력이 필요한 것으로 생각된다.

CFD 기반의 순환 팬 배치 및 유속조절에 의한 식물공장의 에너지 효율 향상 (Improvement of Energy Efficiency of Plants Factory by Arranging Air Circulation Fan and Air Flow Control Based on CFD)

  • 문승미;권숙연;임재현
    • 인터넷정보학회논문지
    • /
    • 제16권1호
    • /
    • pp.57-65
    • /
    • 2015
  • 농업과 IT기술 융합이 가속화됨에 따라 식물공장 내 작물의 품질 및 생산성을 향상시키기 위한 연구가 활발히 진행 중이다. 식물공장의 생산성을 최대화하기 위해서는 먼저 시설 내부의 특성을 고려하여 생육에 적합한 열 환경과 공기의 흐름을 제공하기 위한 고도의 생장환경 관리기술이 필요하다. 현재 운영되고 있는 식물공장은 특화된 공기유동장치의 설계 및 운영기술이 확립되지 않아 온도 기류 편차로 인한 불균일한 품질의 작물 생산, 재배기간 연장에 따른 에너지 소비 등의 문제점을 내포하고 있다. 이를 해결하기 위해서는 식물공장 시설의 설계 단계에서 전산유체역학 시뮬레이션을 이용한 공기유동장치의 배치 및 운영기술에 대한 최적화 과정이 선행되어야 한다. 본 연구에서는 CFD(Computational Fluid Dynamics) 시뮬레이션을 이용한 순환 팬의 적정 배치 및 유속을 파악하여 식물공장 시설 내부의 각 지점별 온도 편차를 최소화하고 에너지소비를 절감한다. 시뮬레이션 조건은 순환 팬의 설치 위치 및 수량 그리고 유속변화에 따라 총 12가지의 Case로 구분하였으며 해석을 위한 경계 조건 변수는 동일하게 설정하였다. 시뮬레이션 결과, 2set의 순환 팬을 식물재배기 상단에 부착한 Case D의 제어 조건이 설정온도에 부합하는 296.33K의 평균온도를 유지하면서 식물생육에 적합한 0.51m/s의 기류분포를 보였다. 또한, 순환 팬의 유속을 변화시킨 결과, 출구 유속을 2.09/s로 설정한 Case D-3이 에너지 효율 측면에서 가장 우수한 결과를 보였다.

간호 관리 능력 개발을 위한 교육 연구 (Needs on Management Development Program for Head Nurse)

  • 박정선
    • 가정간호학회지
    • /
    • 제5권
    • /
    • pp.84-99
    • /
    • 1998
  • The objectives of this study are to identify the actual educational contents of management for head nurse and to propose the educational subjects according to identity the needs of head, charge, and staff nurses. The subjects were investigated the actual Management Development Programs and educational needs of head nurses and prospective nurse manager(charge nurse, staff nurse with a lot of clinical experiences) in general hospitals. The tools were composed of two questionnaires: One was developed from the literature review for making items to measure actual situation. The other was revised Katz's model for measurement of educational needs. The first respondents of actual situation were 27 general hospitals with over 400 beds in Seoul and the second respondents were 89 head nurses, 67 charge nurses and 136 nurses at 3 hospitals by convenient sampling out of 27 general hospitals. Data were collected by telephone interview, mail questionnaire and visiting from 7th of October through 30th of November in 1997. In data analysis, general characteristics of the respondents and actual status of Management Development Programs were analyzed by frequency and percentage. Educational needs according to general characteristics were analyzed by ANOVA The results were as follows: 1. Actual situation of Management Development Program 1) Seven hospitals(26%) had Management Development Program for prospective managers and 14 hospitals (52%) for head nurses. 2) Education Department existed in 14 hospitals (52%). 3) One hospital(4%) had top level managers took part in the Management Development. 4) Two hospitals selected head nurse, who had finished courses of Management Development. Eight hospitals(30%) assessed educational needs. The assessment tools consisted of making a question via questionnaire(75%), determining at department meeting(12%) and interview(13%). 5) Educational programs had 3 types: 10 lecture type, 7 discussion type and 4 role play type programs. 6) One hospital evaluated the change of learner's attitude. 7) Four hospitals scored educational point, but that was measured only by attending. 8) Actual Management Development Programs were as follows. parenthesis indicates the number of hospitals. (1) Management Development Programs for Prospective manager. Role perception of Middle level Manager (1) . Role reconstruction of Nurse Manager (1). Workshop for Charge Nurse (1). Nursing Delivery System and Nursing Process (1). Communication (1). Motivation (1) (2) Management Development Programs for Head nurse.. Head nurse's Role (5). Administrative Work (7). Service Education (4). Prevention and Countermeasure of Nursing Incidence (3). Appraisal (3) 2. The results of needs on Management Development subject 1) The educational needs of all respondents on 3 skill domains showed positive agreement to strongly positive agreement. 2) High priority(more than 4.5) items were 12 of 24 Human skill items(50%), 1 of 6 Technical skill items(16%), and 2 of 13 Conceptual skill items (15%). 3) Out of high priority items, 8 items were instituted. 4) All respondents showed high needs on 3 skill domains regardless of 3 positions (head nurse, charge nurse, and nurse). Educational needs of Human skill domain, according to position were 108. S, 108.7, 106.8 (mean score = 72) , needs of Technical skill domain were 26.5, 26.6, 26.I(mean score=18), and needs of Conceptual skill domains were 56.9,56.7, 55.1(mean score=39). 5) Needs of 3 skill domains according to clinical career showed significant difference. Out of respondents, nurses with career of over 16years showed lowest degree of needs in Human skill domains(F=4.47, P=.004) and Conceptual skill domain(F=2.93, P=.034). 6) Educational needs according to educational background were not significant difference. But out of respondents, nurses educated at 3-year junior college relatively showed lowest needs in all of the 3 skill domains. With the above-mentioned findings, further study is necessary for generalization of this study at hospitals with different bed size and location. Also it is needed to study about management skill of nurse and charge nurse, and effective educational method.

  • PDF